Large-scale Industrial Trial on Canola Using 2-methyloxolane as Extraction Solvent - A Clean Alternative to Hexane

2021 ◽  
Author(s):  
Mickael Bartier
Keyword(s):  
Large Scale ◽  
Industrial Trial ◽  
Extraction Solvent

Detection of 20 Phthalate Esters in Different Kinds of Food Packaging Materials by GC-MS/MS with Five Internal Standards

2019 ◽  
Vol 102 (1) ◽  
pp. 255-261 ◽  
Author(s):  
Ji-cai Fan ◽  
Quan Jin ◽  
Hua-li He ◽  
Ren Ren ◽  
Shu-ting Wang
Keyword(s):  
Food Packaging ◽  
Large Scale ◽  
Phthalate Esters ◽  
Correlation Coefficients ◽  
Packaging Materials ◽  
Purification Step ◽  
Internal Standards ◽  
Extraction Solvent ◽  
Food Packaging Materials ◽  
Relative Standard

Abstract Background: Phthalate esters (PAEs) are a group of chemical compounds widely used as plasticizers to increase the flexibility of plastics that are used in the manufacturing of kitchen utensils and food containers. Objective: In this study, a simple, rapid, and sensitive method for the determination of 20 PAEs in different kinds of food packaging materials has been developed. Methods: Samples injected with five internal standards were extracted with acetonitrile saturated with n-hexane and then detected by GC-MS/MS without a purification step. Results: The standard calibration curves were linear for all analytes over the concentration range of 5–500 μg/L, and the correlation coefficients ranged from 0.9913 to 0.9999. The LODs and LOQs were in the ranges of 1.7–62.5 and 5.5–208.3 μg/kg, respectively. The accuracy of this method was evaluated by measuring the recovery from spiked samples. The recoveries of all 20 phthalates from samples spiked at three different concentrations were measured, and the recovery was in the range of 82.1–110.8% and the relative standard deviation range of recovery result (n = 6) was 0.3–9.7%. Conclusions: The method presented here is simple, rapid, and sensitive and can be applied to large-scale detection of PAEs in plastic materials. Highlights: Instead of only one solvent, acetonitrile saturated with n-hexane was used as the extraction solvent. Samples were pretreated without a purification step. Five internal standards were used for quantitative determination.

scholarly journals Energy-efficient bioethanol recovery process using deep eutectic solvent as entrainer

2021 ◽  
Author(s):  
Seong Chan Lee ◽  
Hyeon Woo Oh ◽  
Hee Chul Woo ◽  
Young Han Kim
Keyword(s):  
Energy Efficient ◽  
High Performance ◽  
Large Scale ◽  
Fermentation Broth ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Recovery Process ◽  
Liquid Equilibrium ◽  
Extraction Solvent ◽  
Industrial Operations

AbstractBioethanol is commonly recovered from fermentation broth via distillation because it is the most economical and reliable process for large-scale industrial operations. Because extraction is a highly energy-efficient process applicable to low-composition bio-product separation, high-performance solvents are necessary for efficient bioethanol recovery. 2-Methyl pentanol, a branched long-chain alcohol, which was used as the extraction solvent, and a deep eutectic solvent, choline chloride and ethylene glycol (1:2), was employed as an entrainer for product refinement. Thermodynamic models of vapor–liquid equilibrium (VLE) and liquid–liquid equilibrium (LLE) systems were derived using molecular simulations and experimental results to develop the bioethanol extraction and refinement processes. The heat duty of the designed process was reduced by a quarter compared to that of previous recovery processes. Graphic abstract

scholarly journals Comparison of Refluxing, Ultrasonic- and Microwave-Assisted Extraction of Dihydromyricetin from Ampelopsis grossedentata

2008 ◽  
Vol 91 (6) ◽  
pp. 1278-1283 ◽  
Author(s):  
Hui Li ◽  
Yanan Li ◽  
Yongkang Zhang ◽  
Hui Shi ◽  
Wenbin Hu ◽  
...  
Keyword(s):  
High Performance ◽  
Large Scale ◽  
Extraction Efficiency ◽  
Chemical Constituents ◽  
Microwave Assisted Extraction ◽  
Extraction Solvent ◽  
Microwave Assisted ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ampelopsis Grossedentata

Abstract Three techniquesrefluxing extraction (RE), ultrasonic-assisted extraction (UAE), microwave-assisted extraction (MAE)for extraction of dihydromyricetin from Ampelopsis grossedentata, family Vitaceae, were evaluated. A 70 methanolwater solution was used as extraction solvent, and extracts obtained were analyzed by high-performance liquid chromatography (HPLC). Results showed that the MAE method was the most efficient in the shortest time, followed by RE and UAE. Maximum extraction efficiency of dihydromyricetin was obtained by using the MAE technique, which needs only 10 min, whereas UAE and RE require 40 and 300 min, respectively, to gain higher extraction efficiency of dihydromyricetin. The time needed for MAE was 30 times less than that needed for RE. Extracts obtained by using different methods were shown by HPLC analysis to possess similar chemical constituents, and extraction reproducibility was satisfactory for these techniques. Compared with UAE and RE, the MAE is a better alternative extraction technique for large-scale speedy extraction of dihydromyricetin from this plant.

Some comments about observations and image processing of comet 29P/Schwassmann-Wachmann 1

1999 ◽  
Vol 173 ◽  
pp. 243-248
Author(s):  
D. Kubáček ◽  
A. Galád ◽  
A. Pravda
Keyword(s):  
Image Processing ◽  
Large Scale ◽  
Harvard College ◽  
Oak Ridge ◽  
Large Scale Structures ◽  
Short Period Comet ◽  
Short Period ◽  
Scale Structures ◽  
Harvard College Observatory ◽  
Period Comet

AbstractUnusual short-period comet 29P/Schwassmann-Wachmann 1 inspired many observers to explain its unpredictable outbursts. In this paper large scale structures and features from the inner part of the coma in time periods around outbursts are studied. CCD images were taken at Whipple Observatory, Mt. Hopkins, in 1989 and at Astronomical Observatory, Modra, from 1995 to 1998. Photographic plates of the comet were taken at Harvard College Observatory, Oak Ridge, from 1974 to 1982. The latter were digitized at first to apply the same techniques of image processing for optimizing the visibility of features in the coma during outbursts. Outbursts and coma structures show various shapes.

Evolution of Large-Scale Coronal Structures

1994 ◽  
Vol 144 ◽  
pp. 29-33
Author(s):  
P. Ambrož
Keyword(s):  
Magnetic Field ◽  
Field Line ◽  
Large Scale ◽  
Coronal Magnetic Field ◽  
Source Surface ◽  
Solar Cycles ◽  
Characteristic Relationship ◽  
The Magnetic Field ◽  
Coronal Structures

AbstractThe large-scale coronal structures observed during the sporadically visible solar eclipses were compared with the numerically extrapolated field-line structures of coronal magnetic field. A characteristic relationship between the observed structures of coronal plasma and the magnetic field line configurations was determined. The long-term evolution of large scale coronal structures inferred from photospheric magnetic observations in the course of 11- and 22-year solar cycles is described.Some known parameters, such as the source surface radius, or coronal rotation rate are discussed and actually interpreted. A relation between the large-scale photospheric magnetic field evolution and the coronal structure rearrangement is demonstrated.

Large-scale Motion of Solar Filaments

2000 ◽  
Vol 179 ◽  
pp. 205-208
Author(s):  
Pavel Ambrož ◽  
Alfred Schroll
Keyword(s):  
Magnetic Flux ◽  
Proper Motion ◽  
Time Scale ◽  
Large Scale ◽  
Accuracy Of Measurements ◽  
Solar Filaments ◽  
General Movement ◽  
Scale Motion ◽  
Velocity Scatter

AbstractPrecise measurements of heliographic position of solar filaments were used for determination of the proper motion of solar filaments on the time-scale of days. The filaments have a tendency to make a shaking or waving of the external structure and to make a general movement of whole filament body, coinciding with the transport of the magnetic flux in the photosphere. The velocity scatter of individual measured points is about one order higher than the accuracy of measurements.

Some applications of electron beam microanalysis techniques in VLSI process evaluation

1983 ◽  
Vol 41 ◽  
pp. 160-161
Author(s):  
Simon Thomas
Keyword(s):  
Integrated Circuits ◽  
Process Evaluation ◽  
Large Scale ◽  
Technology Development ◽  
Analytical Techniques ◽  
Successful Implementation ◽  
Analysis Of Failures ◽  
Characterization Of Materials ◽  
Circuits Vlsi

Trends in the technology development of very large scale integrated circuits (VLSI) have been in the direction of higher density of components with smaller dimensions. The scaling down of device dimensions has been not only laterally but also in depth. Such efforts in miniaturization bring with them new developments in materials and processing. Successful implementation of these efforts is, to a large extent, dependent on the proper understanding of the material properties, process technologies and reliability issues, through adequate analytical studies. The analytical instrumentation technology has, fortunately, kept pace with the basic requirements of devices with lateral dimensions in the micron/ submicron range and depths of the order of nonometers. Often, newer analytical techniques have emerged or the more conventional techniques have been adapted to meet the more stringent requirements. As such, a variety of analytical techniques are available today to aid an analyst in the efforts of VLSI process evaluation. Generally such analytical efforts are divided into the characterization of materials, evaluation of processing steps and the analysis of failures.

Electron microscopy study of reactively sputter-deposited Ti/N films on silicon

1992 ◽  
Vol 50 (2) ◽  
pp. 1362-1363
Author(s):  
V. C. Kannan ◽  
A. K. Singh ◽  
R. B. Irwin ◽  
S. Chittipeddi ◽  
F. D. Nkansah ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Large Scale ◽  
Hexagonal Phase ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Process Conditions ◽  
Tin Films ◽  
Wide Range ◽  
Fcc Phase ◽  
Circuits Vlsi

Titanium nitride (TiN) films have historically been used as diffusion barrier between silicon and aluminum, as an adhesion layer for tungsten deposition and as an interconnect material etc. Recently, the role of TiN films as contact barriers in very large scale silicon integrated circuits (VLSI) has been extensively studied. TiN films have resistivities on the order of 20μ Ω-cm which is much lower than that of titanium (nearly 66μ Ω-cm). Deposited TiN films show resistivities which vary from 20 to 100μ Ω-cm depending upon the type of deposition and process conditions. TiNx is known to have a NaCl type crystal structure for a wide range of compositions. Change in color from metallic luster to gold reflects the stabilization of the TiNx (FCC) phase over the close packed Ti(N) hexagonal phase. It was found that TiN (1:1) ideal composition with the FCC (NaCl-type) structure gives the best electrical property.

Evolution of the microstructure of Cu(Ti)/SiO2 layers annealed in NH3

1995 ◽  
Vol 53 ◽  
pp. 452-453
Author(s):  
J. Liu ◽  
N. D. Theodore ◽  
D. Adams ◽  
S. Russell ◽  
T. L. Alford ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Titanium Nitride ◽  
Large Scale ◽  
Standard Procedure ◽  
Alloy Film ◽  
Electron Beam Evaporation ◽  
Copper Metallization ◽  
Nominal Composition ◽  
Ti Alloy ◽  
Thermally Grown

Copper-based metallization has recently attracted extensive research because of its potential application in ultra-large-scale integration (ULSI) of semiconductor devices. The feasibility of copper metallization is, however, limited due to its thermal stability issues. In order to utilize copper in metallization systems diffusion barriers such as titanium nitride and other refractory materials, have been employed to enhance the thermal stability of copper. Titanium nitride layers can be formed by annealing Cu(Ti) alloy film evaporated on thermally grown SiO2 substrates in an ammonia ambient. We report here the microstructural evolution of Cu(Ti)/SiO2 layers during annealing in NH3 flowing ambient.The Cu(Ti) films used in this experiment were prepared by electron beam evaporation onto thermally grown SiO2 substrates. The nominal composition of the Cu(Ti) alloy was Cu73Ti27. Thermal treatments were conducted in NH3 flowing ambient for 30 minutes at temperatures ranging from 450°C to 650°C. Cross-section TEM specimens were prepared by the standard procedure.

Immunogold labeling of CMP-KDO synthetase produced by recombinant E. Coli cells

1987 ◽  
Vol 45 ◽  
pp. 924-925
Author(s):  
F. A. Durum ◽  
R. G. Goldman ◽  
T. J. Bolling ◽  
M. F. Miller
Keyword(s):  
Inclusion Bodies ◽  
Large Scale ◽  
Recombinant Dna ◽  
Test System ◽  
Cell Protein ◽  
Gram Negative Bacteria ◽  
Cytoplasmic Inclusions ◽  
Isolation And Purification ◽  
E Coli ◽  
Low Concentrations

CMP-KDO synthetase (CKS) is an enzyme which plays a key role in the synthesis of LPS, an outer membrane component unique to gram negative bacteria. CKS activates KDO to CMP-KDO for incorporation into LPS. The enzyme is normally present in low concentrations (0.02% of total cell protein) which makes it difficult to perform large scale isolation and purification. Recently, the gene for CKS from E. coli was cloned and various recombinant DNA constructs overproducing CKS several thousandfold (unpublished data) were derived. Interestingly, no cytoplasmic inclusions of overproduced CKS were observed by EM (Fig. 1) which is in contrast to other reports of large proteinaceous inclusion bodies in various overproducing recombinant strains. The present immunocytochemical study was undertaken to localize CKS in these cells.Immune labeling conditions were first optimized using a previously described cell-free test system. Briefly, this involves soaking small blocks of polymerized bovine serum albumin in purified CKS antigen and subjecting them to various fixation, embedding and immunochemical conditions.

Sign in / Sign up

Export Citation Format

Share Document