scholarly journals Recovery Act: A Low Cost Spray Deposited Solar PV Anti-Reflection Coating Final Technical Report

2010 ◽  
Author(s):  
Michael D Harvey
Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.


Electronics ◽  
2018 ◽  
Vol 7 (7) ◽  
pp. 119 ◽  
Author(s):  
Muhammad Khan ◽  
Kamran Zeb ◽  
Waqar Uddin ◽  
P. Sathishkumar ◽  
Muhammad Ali ◽  
...  

Environment protection and energy saving are the most attractive trends in zero-carbon buildings. The most promising and environmentally friendly technique is building integrated photovoltaics (BIPV), which can also replace conventional buildings based on non-renewable energy. Despite the recent advances in technology, the cost of BIPV systems is still very high. Hence, reducing the cost is a major challenge. This paper examines and validates the effectiveness of low-cost aluminum (Al) foil as a reflector. The design and the performance of planer-reflector for BIPV systems are analyzed in detail. A Bi-reflector solar PV system (BRPVS) with thin film Al-foil reflector and an LLC converter for a BIPV system is proposed and experimented with a 400-W prototype. A cadmium–sulfide (CdS) photo-resistor sensor and an Arduino-based algorithm was developed to control the working of the reflectors. Furthermore, the effect of Al-foil reflectors on the temperature of PV module has been examined. The developed LLC converter confirmed stable output voltage despite large variation in input voltage proving its effectiveness for the proposed BRPVS. The experimental results of the proposed BRPVS with an Al-reflector of the same size as that of the solar PV module offered an enhancement of 28.47% in the output power.


2016 ◽  
Author(s):  
Sungly Chiu ◽  
Surendra Vohra ◽  
Emil Abdelshehid ◽  
David G. Szucs

2021 ◽  
Vol 850 (1) ◽  
pp. 012008
Author(s):  
N Rajamurugu

Abstract Renewable energy sources become suitable valid options to reduce the dependency on fossil fuels or petroleum products. The International Renewable Energy Agency reports that the world will harvest 40% of energy from renewable energy sources by 2030. Conventional technologies such as solar PV technology, consumes higher capital per unit (kWh) of electricity generation cost significantly higher than the traditional sources. Hence, solar chimney power generation system can be suitable option for generating low cost energy. Solar chimneys are developed and tested by different researchers in enhancing the performance of the system. Studies on the geometric modifications of the collector, and chimney are limited. The aim of this paper is to analyse the experimental data obtained from a divergent solar chimney. Experimentation is carried under sunlight in an open atmosphere. The airflow rates in the chimneys are tested under different collector outlet height. The experimental results showed that a chimney with higher collector openings was performed well than other models. The computational analysis is also carried out using ANSYS Fluent software package which shows that the collector opening of 2.5m is recommended for higher high mass flow rate and system efficiency.


Author(s):  
Chan Men Loon ◽  
Muhamad Zalani Daud

This paper presents development of a prototype sensorless dual axis solar tracker for maximum extraction of solar energy. To prove the concept and evaluate the proposed algorithm, a low cost widely availabe materials were used which was programmed based on Arduino microcontroller. The porposed algorithm works based on two search methods namely the global search that approximates the best point location in a region, and local search that further determines the actual sun’s position. Experimental results showed that the proposed algorithm gives better performance compared to the existing sun position algorithm (SPA) - based method as well as the fixed panel system. In terms of total output power, the proposed algorithm gives 17.96% more efficient than the fixed system and 6.38% better than the SPA-based system. Furthermore, the percentage error of the experimental measured angle to the actual sun azimuth angle was relatively minimal (less than 3%) during clear day operation. The system was proven to be effective in tracking the sun for improved energy production of solar PV panels and the proposed algorithm also can be used for designing the tracker with larger size of solar PV systems.


2018 ◽  
Author(s):  
Ibraheam Al-Aali ◽  
Vijay Modi

Soaring electricity demand from space cooling and excellent solar photovoltaics (PV) resources are creating an opportunity for the financial viability of low-emission solutions in Qatar that can compete with existing approaches. This study examines the big picture viability of combining large utility-scale PV with decentralized building-scale ice storage for cooling in Qatar. Qatar is found to have consistently high repeatable solar radiation intensity that nearly matches space cooling requirement. A means to exploit the low installed costs of PV, combined with low cost and long lifetime of ice storage (as opposed to batteries) are examined to meet space cooling loads. Space cooling is responsible for about 65% of Qatar’s annual electric load (which averaged 4.68 GW in 2016). While multiple gas prices are considered, a scenario with the current gas price of $3.33/MMBTU, a PV system of 9.7 GW capacity and an aggregate ice-storage capacity of 4.5 GWh could reduce the gas-fired power generation in Qatar by nearly 39%. Here, gas-fired generation capacity to meet current load exists and hence is not costed.


Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 920 ◽  
Author(s):  
Christie Etukudor ◽  
Benoit Couraud ◽  
Valentin Robu ◽  
Wolf-Gerrit Früh ◽  
David Flynn ◽  
...  

Reliable access to electricity is still a challenge in many developing countries. Indeed, rural areas in sub-Saharan Africa and developing countries such as India still encounter frequent power outages. Local energy markets (LEMs) have emerged as a low-cost solution enabling prosumers with power supply systems such as solar PV to sell their surplus of energy to other members of the local community. This paper proposes a one-to-one automated negotiation framework for peer-to-peer (P2P) local trading of electricity. Our framework uses an autonomous agent model to capture the preferences of both an electricity seller (consumer) and buyer (small local generator or prosumer), in terms of price and electricity quantities to be traded in different periods throughout a day. We develop a bilateral negotiation framework based on the well-known Rubinstein alternating offers protocol, in which the quantity of electricity and the price for different periods are aggregated into daily packages and negotiated between the buyer and seller agent. The framework is then implemented experimentally, with buyers and sellers adopting different negotiation strategies based on negotiation concession algorithms, such as linear heuristic or Boulware. Results show that this framework and agents modelling allow prosumers to increase their revenue while providing electricity access to the community at low cost.


Sign in / Sign up

Export Citation Format

Share Document