Examining Ice Storage and Solar PV As a Potential Push Toward Sustainability for Qatar

2018 ◽  
Author(s):  
Ibraheam Al-Aali ◽  
Vijay Modi

Soaring electricity demand from space cooling and excellent solar photovoltaics (PV) resources are creating an opportunity for the financial viability of low-emission solutions in Qatar that can compete with existing approaches. This study examines the big picture viability of combining large utility-scale PV with decentralized building-scale ice storage for cooling in Qatar. Qatar is found to have consistently high repeatable solar radiation intensity that nearly matches space cooling requirement. A means to exploit the low installed costs of PV, combined with low cost and long lifetime of ice storage (as opposed to batteries) are examined to meet space cooling loads. Space cooling is responsible for about 65% of Qatar’s annual electric load (which averaged 4.68 GW in 2016). While multiple gas prices are considered, a scenario with the current gas price of $3.33/MMBTU, a PV system of 9.7 GW capacity and an aggregate ice-storage capacity of 4.5 GWh could reduce the gas-fired power generation in Qatar by nearly 39%. Here, gas-fired generation capacity to meet current load exists and hence is not costed.

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.


Electronics ◽  
2018 ◽  
Vol 7 (7) ◽  
pp. 119 ◽  
Author(s):  
Muhammad Khan ◽  
Kamran Zeb ◽  
Waqar Uddin ◽  
P. Sathishkumar ◽  
Muhammad Ali ◽  
...  

Environment protection and energy saving are the most attractive trends in zero-carbon buildings. The most promising and environmentally friendly technique is building integrated photovoltaics (BIPV), which can also replace conventional buildings based on non-renewable energy. Despite the recent advances in technology, the cost of BIPV systems is still very high. Hence, reducing the cost is a major challenge. This paper examines and validates the effectiveness of low-cost aluminum (Al) foil as a reflector. The design and the performance of planer-reflector for BIPV systems are analyzed in detail. A Bi-reflector solar PV system (BRPVS) with thin film Al-foil reflector and an LLC converter for a BIPV system is proposed and experimented with a 400-W prototype. A cadmium–sulfide (CdS) photo-resistor sensor and an Arduino-based algorithm was developed to control the working of the reflectors. Furthermore, the effect of Al-foil reflectors on the temperature of PV module has been examined. The developed LLC converter confirmed stable output voltage despite large variation in input voltage proving its effectiveness for the proposed BRPVS. The experimental results of the proposed BRPVS with an Al-reflector of the same size as that of the solar PV module offered an enhancement of 28.47% in the output power.


2012 ◽  
Author(s):  
Firdaus Muhammad Sukki ◽  
Roberto Ramirez Iniguez ◽  
Scott G. Mcmeekin ◽  
Brian G. Stewart ◽  
Barry Clive

Solar energy has become a matter of global attention in the past few years. This paper explores the use and benefit of solar concentrators in the solar photovoltaic (PV) systems. First, a short literature review of previous research on the usage of solar concentrators in improving solar PV system performance and reducing the cost of implementation is presented. This is followed by an overview of SolarBrane, an example of a Building Integrated photovoltaic (BIPV) system which uses an optical concentrator in the solar PV design. An optimised design of the SolarBrane is also discussed afterwards. A financial benefit study is conducted to compare the average return of investment of using the optimised SolarBrane and traditional solar PV installed in Malaysia’s environment. SolarBrane has proven to be a good alternative to achieve costeffective solar PV system. The financial analysis simulated under the new Malaysian Feed–In Tariff scheme indicates that the optimised SolarBrane could potentially reduce the initial cost of implementation by 40% and generate higher return, close to 20%, when compared to traditional solar PV systems. Key words: Solar photovoltaic; solar concentrator; solarBrane; dielectric totally internally reflecting concentrator; financial analysis


This paper investigates the impact of investments in DSM technologies in Palestinian electricity market in order to solve the problem of supply shortages in electrical network, especially in peak demand periods. Renewable hybrid system, which can explore solar PV source at low cost, is a popular choice for this purpose nowadays, optimal energy management solutions can be obtained with great cost savings and active control performance. This paper analyzes the performance and feasibility of implementation DSM system in Palestinian distribution network, using on-grid PV system and energy management system.


2019 ◽  
Vol 168 ◽  
pp. 269-282 ◽  
Author(s):  
Oludamilare Bode Adewuyi ◽  
Ryuto Shigenobu ◽  
Tomonobu Senjyu ◽  
Mohammed E. Lotfy ◽  
Abdul Motin Howlader

Author(s):  
Mr. Kishan Khatri ◽  
Dr. Shweta Choudhary

The aim of research is to identify a performance gap of solar PV through the quantitative assessment. In the recent studies it has been observed that the actual performance is considered based on the overall irradiation on the major portion of the area, as the irradiation for low distance grade is challenging to collect across the globe. The study and analysis of the actual solar PV system is the open ground to study and benchmark the generation for particular Jaipur City. On the basis of cost analysis, it has been observed, the rooftop solar plant is a feasible solution as it provides a helping hand to meet the growing energy demand. Although, some challenges such as inflation rate, the current discount rate and life of the plant will remain with installation and generating but, can be mitigated with its long-term benefits. The current market scenario with low cost of renewable technology the role of other financial parameters affects the financial viability of the project therefore it is necessary to analyse all the parameters carefully before installing a PV plant especially in areas where land cost is a considerable parameter. KEYWORDS: Solar PV Generation, Jaipur Radiation, Photovoltaic, Kilowatt peak, Rajasthan Solar


Author(s):  
Constantinos S. Psomopoulos ◽  
George Ch. Ioannidis ◽  
Stavros D. Kaminaris

The interest in solar photovoltaic energy is growing worldwide. Today, more than 40GW of photovoltaics have been installed all over the world. Since the 1970s, the PV system price is continuously dropping. This price drop and the adaptation of feed-in tariffs at governmental or utility scale have encouraged worldwide application of small-scale photovoltaic systems. The objective of this chapter is to present the potential for electricity production focusing mainly on the benefits of small-scale installations in urban areas, along with the growth of the global photovoltaics market. The types of installation alternatives are described but the focus is on the rooftop installations due to their simplicity and relatively low cost for urban areas. Electricity production data are presented together with their technical characteristics. Furthermore, analysis of the cost reduction is attempted and the benefits gained from the implementation of small-scale systems are also presented, demonstrating the sustainability role they will play.


2019 ◽  
Vol 7 (4.14) ◽  
pp. 421
Author(s):  
M. D. Ibrahim ◽  
S. Zainal ◽  
A. K. Othman

The main objective of this project is to design and analyze the cost benefits solar PV system for rural telecenter. The project focused on designing the main solar system and solar panel energy performance based on translucency. The task that was carried out in this project was the selection of the suitable system that will suit the operation well while keeping the design cost as low as possible. In this project, the design of the solar panel system was focused on the electric loads and its cost benefit. Homer software was used to evaluate the solar panel system. Meant for ways of communications for indigenous people, the Solar Photovoltaic system is one of the popular solution for off-grid rural community power supply. The optimized combination for a particular rural site can be predicted based on NASA’s data of Solar Global Horizontal Irradiance (GHI). In this project, Pos Sinderut was chosen as the site, and the data load was measured. In our preliminary findings, it was found that the model on site was not suitably designed and maintained. The data parameters that was used for the on-site installed model was also not possible to be calculated when the model was simulated using Homer Software. As a result, we proposed a new model design by optimizing the load of VSAT and charging station based on the amount of solar PV and batteries that was supplied. This paper shows the significance of preliminary designs based on the irradiance and the usage load of the specific site before any installation should be commenced. It also showed how the site should be maintained properly in order to ensure a chosen site is sustainable for the rural community, post-installation.  


Author(s):  
Rozana Alik ◽  
Awang Jusoh ◽  
Tole Sutikno

<p>Sun irradiation levels and associated temperature changes are the main factors that influence the conversion of solar energy into electricity. Most energy is produced during a hot sunny day as the sun irradiation is at the maximum level and uniform throughout the solar photovoltaic (PV). However, most solar PV were frequently get shadowed, completely or partially, by the neighbouring buildings, trees and passing clouds. Consequently, the solar PV has lower voltage and current output; hence, multiple maximum power points (MPP) are existed on the PV curve, which could cause confusion to the conventional Maximum Power Point Tracker (MPPT) to track the true MPP for the PV system. Thus, it is important to examine the impacts of partial shading on the solar PV in order to extract the maximum possible power. This paper presents a MATLAB-based modelling for simulation and experimental setup to study the I-V and P-V characteristics of a solar module under a non-uniform irradiation due to partial shading condition (PSC).  Furthermore, this study is also proposed an effective method (a variable step size of P&amp;O with checking algorithm) that is low cost and higher tracking efficiency. Thus, this study is essential in improving and evaluating any new MPPT algorithm under the PSC.</p>


Sign in / Sign up

Export Citation Format

Share Document