scholarly journals High-reliability gas turbine combined-cycle development program: advanced compressor design study. Final report

1980 ◽  
Author(s):  
Not Given Author
Keyword(s):  
Gas Turbine ◽  
High Reliability ◽  
Development Program ◽  
Combined Cycle ◽  
Final Report ◽  
Design Study ◽  
Compressor Design

scholarly journals High-reliability gas turbine combined-cycle development program. Phase I. Final report

1980 ◽  
Author(s):  
R. E. Strong ◽  
D. J. Amos ◽  
K. H. Eagle ◽  
G. L. Francois
Keyword(s):  
Phase I ◽  
Gas Turbine ◽  
High Reliability ◽  
Development Program ◽  
Combined Cycle ◽  
Final Report

Final Report of the Key Technology Development Program for a Next-Generation High-Temperature Gas Turbine

1997 ◽  
Vol 119 (3) ◽  
pp. 617-623 ◽  
Author(s):  
M. Sato ◽  
Y. Kobayashi ◽  
H. Matsuzaki ◽  
S. Aoki ◽  
Y. Tsukuda ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Technology Development ◽  
Development Program ◽  
Combined Cycle ◽  
Final Report ◽  
Next Generation ◽  
Key Technologies ◽  
Low Nox Combustion ◽  
System 2

There is a strong demand for efficient and clean power-generating systems to meet recent energy-saving requirements and environmental regulations. A combined cycle power plant is one of the best solutions to the above [1]. Tohoku Electric Power Co., Inc., and Mitsubishi Heavy Industries, Ltd., have jointly developed three key technologies for a next-generation 1500°C class gas turbine. The three key technologies consist of: (1) high-temperature low-NOx combustion system. (2) row 1 turbine vane and blade with advanced cooling schemes, and (3) advanced heat-resistant materials; (2) and (3) were verified by HTDU (High Temperature Demonstration Unit). This paper describes the results of the above-mentioned six-year joint development.

Final Report of the Key Technology Development Program for a Next Generation High Temperature Gas Turbine

1995 ◽  
Author(s):  
M. Sato ◽  
Y. Kobayashi ◽  
H. Matsuzaki ◽  
S. Aoki ◽  
Y. Tsukuda ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Technology Development ◽  
Development Program ◽  
Combined Cycle ◽  
Final Report ◽  
Next Generation ◽  
Key Technologies ◽  
Low Nox Combustion ◽  
System 2

There is a strong demand for efficient and clean power generating systems to meet recent energy saving requirements and environmental regulations. A combined cycle power plant is one of the best solutions to the above. Tohoku Electric Power Co., Inc. and Mitsubishi Heavy Industries, Ltd. have jointly developed three key technologies for a next generation 1,500°C class gas turbine. The three key technologies consist of (1) high temperature low NOx combustion system, (2) row I turbine vane and blade with advanced cooling schemes, and (3) advanced heat resistant materials, verified by HTDU (High Temperature Demonstration Unit). This paper describes the results of the above mentioned 6 year joint development.

Evolution and Future Trend of Large Frame Gas Turbines: A New 1600 Degree C, J Class Gas Turbine

2012 ◽  
Author(s):  
Satoshi Hada ◽  
Masanori Yuri ◽  
Junichiro Masada ◽  
Eisaku Ito ◽  
Keizo Tsukagoshi
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Pressure Ratio ◽  
Standard Condition ◽  
Development Program ◽  
Combined Cycle ◽  
Component Technology ◽  
Extensive Experience ◽  
National Project ◽  
Cycle Efficiency

MHI recently developed a 1600°C class J-type gas turbine, utilizing some of the technologies developed in the National Project to promote the development of component technology for the next generation 1700°C class gas turbine. This new frame is expected to achieve higher combined cycle efficiency and will contribute to reduce CO2 emissions. The target combined cycle efficiency of the J type gas turbine will be above 61.5% (gross, ISO standard condition, LHV) and the 1on1 combined cycle output will reach 460MW for 60Hz engine and 670MW for 50Hz engine. This new engine incorporates: 1) A high pressure ratio compressor based on the advanced M501H compressor, which was verified during the M501H development in 1999 and 2001. 2) Steam cooled combustor, which has accumulated extensive experience in the MHI G engine (> 1,356,000 actual operating hours). 3) State-of-art turbine designs developed through the 1700°C gas turbine component technology development program in Japanese National Project for high temperature components. This paper discusses the technical features and the updated status of the J-type gas turbine, especially the operating condition of the J-type gas turbine in the MHI demonstration plant, T-Point. The trial operation of the first M501J gas turbine was started at T-point in February 2011 on schedule, and major milestones of the trial operation have been met. After the trial operation, the first commercial operation has taken place as scheduled under a predominantly Daily-Start-and-Stop (DSS) mode. Afterward, MHI performed the major inspection in October 2011 in order to check the mechanical condition, and confirmed that the hot parts and other parts were in sound condition.

Development of an 8MW-Class High-Efficiency Gas Turbine, M7A-03

2007 ◽  
Author(s):  
Kazuhiko Tanimura ◽  
Naoki Murakami ◽  
Akinori Matsuoka ◽  
Katsuhiko Ishida ◽  
Hiroshi Kato ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Thermal Efficiency ◽  
High Performance ◽  
High Efficiency ◽  
High Reliability ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Gas Temperature ◽  
Turbine Cooling ◽  
Distributed Power Generation

The M7A-03 gas turbine, an 8 MW class, single shaft gas turbine, is the latest model of the Kawasaki M7A series. Because of the high thermal efficiency and the high exhaust gas temperature, it is particularly suitable for distributed power generation, cogeneration and combined-cycle applications. About the development of M7A-03 gas turbine, Kawasaki has taken the experience of the existing M7A-01 and M7A-02 series into consideration, as a baseline. Furthermore, the latest technology of aerodynamics and cooling design, already applied to the 18 MW class Kawasaki L20A, released in 2000, has been applied to the M7A-03. Kawasaki has adopted the design concept for achieving reliability within the shortest possible development period by selecting the same fundamental engine specifications of the existing M7A-02 – mass air flow rate, pressure ratio, TIT, etc. However, the M7A-03 has been attaining a thermal efficiency of greater than 2.5 points higher and an output increment of over 660 kW than the M7A-02, by the improvement in aerodynamic performance of the compressor, turbine and exhaust diffuser, improved turbine cooling, and newer seal technology. In addition, the NOx emission of the combustor is low and the M7A-03 has a long service life. These functions make long-term continuous operation possible under various environmental restraints. Lower life cycle costs are achieved by the engine high performance, and the high-reliability resulting from simple structure. The prototype M7A-03 gas-turbine development test started in the spring of 2006 and it has been confirmed that performance, mechanical characteristics, and emissions have achieved the initial design goals.

scholarly journals Development of the Next Generation 1500°C Class Advanced Gas Turbine for 50Hz Utilities

1996 ◽  
Author(s):  
S. Aoki ◽  
Y. Tsukuda ◽  
E. Akita ◽  
Y. Iwasaki ◽  
R. Tomat ◽  
...  
Keyword(s):  
Electric Power ◽  
Gas Turbine ◽  
Power Plants ◽  
New Technologies ◽  
Development Program ◽  
Combined Cycle ◽  
Next Generation ◽  
Design Work ◽  
Component Development ◽  
Westinghouse Electric

The 701G1 50Hz Combustion Turbine continues a long line of large heavy-duty single-shaft combustion turbines by combining the proven efficient and reliable concepts of the 501F and 701F. The output of the 701G1 is 255MW with combined cycle net efficiency of over 57%. A pan of component development was conducted under the joint development program with Tohoku Electric Power Co., Inc. and a part of the design work was carried out under the cooperation with Westinghouse Electric Corporation in the U.S.A. and Fiat Avio in Italy. This gas turbine is going to be installed to “Higashi Niigata Power Plants NO.4” of Tohoku Electric Power Co., Inc. in Japan. This plant will begin commercial operation in 1999. This paper describes some design results and new technologies in designing and developing this next generation 1500°C class advanced gas turbine.

Sign in / Sign up

Export Citation Format

Share Document