scholarly journals Turbine cooling configuration selection and design optimization for the high-reliability gas turbine. Final report

1981 ◽  
Author(s):  
M J Smith ◽  
M Suo
Keyword(s):  
Design Optimization ◽  
Gas Turbine ◽  
High Reliability ◽  
Final Report ◽  
Turbine Cooling ◽  
Configuration Selection

Development of an 8MW-Class High-Efficiency Gas Turbine, M7A-03

2007 ◽  
Author(s):  
Kazuhiko Tanimura ◽  
Naoki Murakami ◽  
Akinori Matsuoka ◽  
Katsuhiko Ishida ◽  
Hiroshi Kato ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Thermal Efficiency ◽  
High Performance ◽  
High Efficiency ◽  
High Reliability ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Gas Temperature ◽  
Turbine Cooling ◽  
Distributed Power Generation

The M7A-03 gas turbine, an 8 MW class, single shaft gas turbine, is the latest model of the Kawasaki M7A series. Because of the high thermal efficiency and the high exhaust gas temperature, it is particularly suitable for distributed power generation, cogeneration and combined-cycle applications. About the development of M7A-03 gas turbine, Kawasaki has taken the experience of the existing M7A-01 and M7A-02 series into consideration, as a baseline. Furthermore, the latest technology of aerodynamics and cooling design, already applied to the 18 MW class Kawasaki L20A, released in 2000, has been applied to the M7A-03. Kawasaki has adopted the design concept for achieving reliability within the shortest possible development period by selecting the same fundamental engine specifications of the existing M7A-02 – mass air flow rate, pressure ratio, TIT, etc. However, the M7A-03 has been attaining a thermal efficiency of greater than 2.5 points higher and an output increment of over 660 kW than the M7A-02, by the improvement in aerodynamic performance of the compressor, turbine and exhaust diffuser, improved turbine cooling, and newer seal technology. In addition, the NOx emission of the combustor is low and the M7A-03 has a long service life. These functions make long-term continuous operation possible under various environmental restraints. Lower life cycle costs are achieved by the engine high performance, and the high-reliability resulting from simple structure. The prototype M7A-03 gas-turbine development test started in the spring of 2006 and it has been confirmed that performance, mechanical characteristics, and emissions have achieved the initial design goals.

scholarly journals High-reliability gas turbine combined-cycle development program. Phase I. Final report

1980 ◽  
Author(s):  
R. E. Strong ◽  
D. J. Amos ◽  
K. H. Eagle ◽  
G. L. Francois
Keyword(s):  
Phase I ◽  
Gas Turbine ◽  
High Reliability ◽  
Development Program ◽  
Combined Cycle ◽  
Final Report

scholarly journals Two-Stage Evaporative Inlet Air Gas Turbine Cooling

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1382
Author(s):  
Obida Zeitoun
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Evaporative Cooling ◽  
Air Cooling ◽  
Vapor Compression ◽  
Two Stage ◽  
Turbine Cooling ◽  
Riyadh City ◽  
Vapor Compression Refrigeration ◽  
Gas Turbine Cooling

Gas turbine inlet air-cooling (TIAC) is an established technology for augmenting gas turbine output and efficiency, especially in hot regions. TIAC using evaporative cooling is suitable for hot, dry regions; however, the cooling is limited by the ambient wet-bulb temperature. This study investigates two-stage evaporative TIAC under the harsh weather of Riyadh city. The two-stage evaporative TIAC system consists of indirect and direct evaporative stages. In the indirect stage, air is precooled using water cooled in a cooling tower. In the direct stage, adiabatic saturation cools the air. This investigation was conducted for the GE 7001EA gas turbine model. Thermoflex software was used to simulate the GE 7001EA gas turbine using different TIAC systems including evaporative, two-stage evaporative, hybrid absorption refrigeration evaporative and hybrid vapor-compression refrigeration evaporative cooling systems. Comparisons of different performance parameters of gas turbines were conducted. The added annual profit and payback period were estimated for different TIAC systems.

A New Concept of High-Performance Marine Reversing Reduction Gears

1988 ◽  
Vol 110 (4) ◽  
pp. 572-577
Author(s):  
D. J. Folenta
Keyword(s):  
Gas Turbine ◽  
High Performance ◽  
Power Transmission ◽  
High Reliability ◽  
Mechanical Efficiency ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Turbine Engine ◽  
Epicyclic Gear ◽  
Gear Technology

This paper presents a brief description and several illustrations of a new concept of marine reversing gears that utilize high-performance differentially driven epicyclic gear arrangements. This new marine power transmission has the potential to offer high reliability, simplicity, light weight, high mechanical efficiency, compactness, and technological compatibility with aircraft derivative marine gas turbine engines. Further, this new reversing gear minimizes the danger of driving the free turbine in reverse as might be the case with conventional parallel shaft reversing gear arrangements. To illustrate the weight reduction potential, a modern naval ship propulsion system utilizing an aircraft derivative gas turbine engine as the prime mover in conjunction with a conventional parallel shaft reversing gear can be compared to the subject reversing gear differential. A typical 18,642 kW (25,000 hp) marine gas turbine engine might weigh approximately 5000 kg (11,000 lb) and a conventional marine technology parallel shaft reversing gear might weigh on the order of 90,000 to 136,000 kg (200,000 to 300,000 lb). Using gear technology derived from the aircraft industry, a functionally similar differentially driven marine reversing gear might weigh approximately 13,600 kg (30,000 lb).

Sign in / Sign up

Export Citation Format

Share Document