scholarly journals Organohalogen products from chlorination of cooling water at nuclear power stations

1983 ◽  
Author(s):  
R.M. Bean
Keyword(s):  
Nuclear Power ◽  
Cooling Water ◽  
Power Stations

scholarly journals Seaweed ingress of cooling water intakes with predictions for Torness power station

2021 ◽  
Author(s):  
Nikolaos Spanakis ◽  
Peter K. Stansby ◽  
Benedict D. Rogers ◽  
Pietro Bernardara
Keyword(s):  
Nuclear Power ◽  
Narrow Range ◽  
Cooling Water ◽  
Power Station ◽  
Threshold Velocity ◽  
Power Stations ◽  
Sea Bed ◽  
Local Measurements ◽  
Induced Currents ◽  
Wave Induced

AbstractSeaweed ingress into the cooling water intakes of nuclear power stations has caused several disruptions to electricity supply. Seaweed is transported by tidal and wave-induced currents after dislodgement from the sea bed following stormy conditions but ingress will be shown to be not only determined by wave conditions. An integrated model system has been developed to predict such ingress and applied at the Torness power station in Scotland where the mass of seaweed recovered was measured for some ingress cases. Prior to each case, seaweed is assumed initially to be distributed in areas surveyed within the surrounding coastal domain with a mass per unit area based on local measurements. Criteria for dislodgement are based on near-bed velocity. Six cases where the mass of ingress was measured and two cases with no ingress have been modelled and predicted by adjusting a dislodgement factor (a multiplier on the threshold velocity) within a relatively narrow range.

Field Observation of Tide-Induced Loading Upon Undersea Tunnel

2012 ◽  
Author(s):  
Nan Chen ◽  
Guan-lin Ye ◽  
Jin-jian Chen ◽  
Xiao-he Xia
Keyword(s):  
Linear Relation ◽  
Nuclear Power ◽  
Cooling Water ◽  
Earth Pressure ◽  
Tidal Height ◽  
Tidal Level ◽  
Pressure Transducers ◽  
Power Stations ◽  
Earth Pressures ◽  
Type Pressure

Many shallow undersea tunnels have been built to circulate the cooling water for the thermal or nuclear power stations in recent years. In current study, a field monitoring of tide-influenced earth pressure on the tunnel was carried out by using the pad type pressure transducers. The variation of tidal level was also recorded carefully. The measured results of earth pressures and the tidal height were analyzed qualitatively and quantitatively. It can be found that there is a linear relation between the variation of load and tidal height. The computed values of the loadings based on tunnel pressure theory are almost the same with measurements.

An evaluation of the equipment tagging process in nuclear power stations

1983 ◽  
Author(s):  
Peter Doyle ◽  
Lothar Schroeder ◽  
Stephen Brewer
Keyword(s):  
Nuclear Power ◽  
Power Stations

Environmental Protection Meets Security of Electricity Supply

2021 ◽  
pp. 1-18
Author(s):  
Ilina Cenevska
Keyword(s):  
Environmental Protection ◽  
Nuclear Power ◽  
Habitats Directive ◽  
Electricity Supply ◽  
The European Union ◽  
Power Stations ◽  
Court Of Justice ◽  
National Energy Policy ◽  
The Relationship ◽  
Practical Implications

Abstract This case comment explores the relationship between two intertwined objectives – ensuring security of electricity supply and environmental protection – in the context of the judgment of the Court of Justice of the European Union in Inter-Environnement Wallonie ASBL and Bond Beter Leefmilieu Vlaanderen ASBL v. Conseil des ministres. The analysis focuses on the application of the Environmental Impact Assessment Directive and the Habitats Directive to the facts of the case, which concerns the extension by a ten-year period of the operation of two Belgian nuclear power stations (Doel 1 and Doel 2) as part of a national energy policy strategy to ensure the security of Belgium's electricity supply. The case comment also considers the legal and practical implications that arise as a result of employing the ‘security of electricity supply’ exemption to enable derogation from the requirements of the aforementioned Directives in circumstances where a Member State considers the security of its electricity supply to be under threat.

Evaluation of the residual stress in stainless steel 304L hydraulically expanded joints

2020 ◽  
pp. 095440892096401
Author(s):  
Ying Hong ◽  
Xuesheng Wang ◽  
Yan Wang ◽  
Zhao Zhang ◽  
Yong Han
Keyword(s):  
Residual Stress ◽  
Stainless Steel ◽  
Yield Strength ◽  
Residual Stresses ◽  
Heat Exchangers ◽  
Nuclear Power ◽  
The Finite Element Method ◽  
Power Stations ◽  
Stainless Steel 304 ◽  
Initial Clearance

Stainless steel 304 L tubes are commonly used in the fabrication of heat exchangers for nuclear power stations. The stress corrosion cracking (SCC) of 304 L tubes in hydraulically expanded tube-to-tubesheet joints is the main reason for the failure of heat exchangers. In this study, 304 L hydraulically expanded joint specimens were prepared and the residual stresses of a tube were evaluated with both an experimental method and the finite element method (FEM). The residual stresses in the outer and inner surfaces of the tube were measured by strain gauges. The expanding and unloading processes of the tube-to-tubesheet joints were simulated by the FEM. Furthermore, an SCC test was carried out to verify the results of the experimental measurement and the FEM. There was good agreement between the FEM and the experimental results. The distribution of the residual stress of the tube in the expanded joint was revealed by the FEM. The effects of the expansion pressure, initial tube-to-hole clearance, and yield strength of the tube on the residual stress in the transition zone that lay between the expanded and unexpanded region of the tube were investigated. The results showed that the residual stress of the expanded joint reached the maximum value when the initial clearance was eliminated. The residual stress level decreased with the decrease of the initial tube-to-hole clearance and yield strength. Finally, an effective method that would reduce the residual stress without losing tightness was proposed.

scholarly journals Ion chromatographic analysis of aqueous iodine species by conductivity and radioactivity measurements

2005 ◽  
Vol 93 (9-10) ◽  
Author(s):  
Dorothea Schumann ◽  
R. Grasser ◽  
R. Dressler ◽  
H. Bruchertseifer
Keyword(s):  
Chromatographic Analysis ◽  
Nuclear Power ◽  
Power Plants ◽  
Radioactive Iodine ◽  
Cooling Water ◽  
Molecular Iodine ◽  
New Device ◽  
Iodine Species ◽  
Radioactivity Measurements

SummaryA new device was developed for the identification of several iodine species in aqueous solution using ion chromatography. Iodide, iodate and molecular iodine can be determined. (The equipment allows both conductivity and radioactivity detections.) The method is applicable for the determination of radioactive iodine contaminations in the cooling water of nuclear power plants.

Sign in / Sign up

Export Citation Format

Share Document