Development of lithium/metal sulfide batteries at Argonne National Laboratory: summary report for 1977. [Li--Al or Li--Si anode; FeS, FeS/sub 2/, or NiS/sub 2/ cathode]

The uranium silicides, including U3Si, are under study as candidate low enrichment nuclear fuels. Ion beam simulations of the in-reactor behavior of such materials are performed because a similar damage structure can be produced in hours by energetic heavy ions which requires years in actual reactor tests. This contribution treats one aspect of the microstructural behavior of U3Si under high energy electron irradiation and low dose energetic heavy ion irradiation and is based on in situ experiments, performed at the HVEM-Tandem User Facility at Argonne National Laboratory. This Facility interfaces a 2 MV Tandem ion accelerator and a 0.6 MV ion implanter to a 1.2 MeV AEI high voltage electron microscope, which allows a wide variety of in situ ion beam experiments to be performed with simultaneous irradiation and electron microscopy or diffraction.At elevated temperatures, U3Si exhibits the ordered AuCu3 structure. On cooling below 1058 K, the intermetallic transforms, evidently martensitically, to a body-centered tetragonal structure (alternatively, the structure may be described as face-centered tetragonal, which would be fcc except for a 1 pet tetragonal distortion). Mechanical twinning accompanies the transformation; however, diferences between electron diffraction patterns from twinned and non-twinned martensite plates could not be distinguished.

Download Full-text

Environmental cell studies of deformation and fracture

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100175715 ◽

1990 ◽

Vol 48 (4) ◽

pp. 516-517

Author(s):

H. K. Birnbaum ◽

I. M. Robertson

Keyword(s):

National Laboratory ◽

Argonne National Laboratory ◽

Damage Threshold ◽

Chromatic Aberration ◽

Good Choice ◽

Point Of View ◽

Deformation And Fracture ◽

Environmental Cell ◽

Gas Molecules ◽

The University

Studies of the effects of hydrogen environments on the deformation and fracture of fcc, bcc and hep metals and alloys have been carried out in a TEM environmental cell. The initial experiments were performed in the environmental cell of the HVEM facility at Argonne National Laboratory. More recently, a dedicated environmental cell facility has been constructed at the University of Illinois using a JEOL 4000EX and has been used for these studies. In the present paper we will describe the general design features of the JEOL environmental cell and some of the observations we have made on hydrogen effects on deformation and fracture.The JEOL environmental cell is designed to operate at 400 keV and below; in part because of the available accelerating voltage of the microscope and in part because the damage threshold of most materials is below 400 keV. The gas pressure at which chromatic aberration due to electron scattering from the gas molecules becomes excessive does not increase rapidly with with accelerating voltage making 400 keV a good choice from that point of view as well. A series of apertures were placed above and below the cell to control the pressures in various parts of the column.

Download Full-text

Report of investigation into allegations of retaliation for raising safety and quality of work issues regarding Argonne National Laboratory`s Integral Fast Reactor project

10.2172/10103452 ◽

1991 ◽

Author(s):

Keyword(s):

Fast Reactor ◽

National Laboratory ◽

Argonne National Laboratory ◽

Quality Of Work

Download Full-text