scholarly journals Chloride content of Rocky Flats scrub alloy eleventh campaign solution following head end treatment

1988 ◽  
Author(s):  
H.P. Holcomb
Keyword(s):  
Chloride Content ◽  
Rocky Flats

Improving soil remediation through characterization

1995 ◽  
Vol 53 ◽  
pp. 386-387
Author(s):  
E. C. Buck ◽  
N. L. Dietz ◽  
J. K. Bates
Keyword(s):  
Dust Particles ◽  
Radiochemical Analysis ◽  
Solid Product ◽  
Uranium Contamination ◽  
Physical Separation ◽  
X Ray ◽  
Rocky Flats ◽  
Remediation Strategies ◽  
Bearing Materials ◽  
X Ray Absorption

Operations at former weapons processing facilities in the U. S. have resulted in a large volume of radionuclidecontaminated soils and residues. In an effort to improve remediation strategies and meet environmental regulations, radionuclide-bearing particles in contaminant soils from Fernald in Ohio and the Rocky Flats Plant (RFP) in Colorado have been characterized by electron microscopy. The object of these studies was to determine the form of the contaminant radionuclide, so that it properties could be established [1]. Physical separation and radiochemical analysis determined that uranium contamination at Fernald was not present exclusively in any one size/density fraction [2]. The uranium-contamination resulted from aqueous and solid product spills, air-borne dust particles, and from the operation of an incinerator on site. At RFP the contamination was from the incineration of Pu-bearing materials. Further analysis by x-ray absorption spectroscopy indicated that the majority of the uranium was in the 6+ oxidation state [3].

Pilot-scale combustion studies with kraft lignin in a powder burner and a CFB boiler

TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 24-30 ◽  
Author(s):  
NIKLAS BERGLIN ◽  
PER TOMANI ◽  
HASSAN SALMAN ◽  
SOLVIE HERSTAD SVÄRD ◽  
LARS-ERIK ÅMAND
Keyword(s):  
Circulating Fluidized Bed ◽  
Black Liquor ◽  
Chloride Content ◽  
Pilot Scale ◽  
High Energy ◽  
Kraft Lignin ◽  
High Energy Density ◽  
Alkali Chloride ◽  
Cfb Boiler ◽  
Solid Biofuel

Processes have been developed to produce a solid biofuel with high energy density and low ash content from kraft lignin precipitated from black liquor. Pilot-scale tests of the lignin biofuel were carried out with a 150 kW powder burner and a 12 MW circulating fluidized bed (CFB) boiler. Lignin powder could be fired in a powder burner with good combustion performance after some trimming of the air flows to reduce swirl. Lignin dried to 10% moisture content was easy to feed smoothly and had less bridging tendencies in the feeding system than did wood/bark powder. In the CFB boiler, lignin was easily handled and cofired together with bark. Although the filter cake was broken into smaller pieces and fines, the combustion was not disturbed. When cofiring lignin with bark, the sulfur emission increased compared with bark firing only, but most of the sulfur was captured by calcium in the bark ash. Conventional sulfur capture also occurred with addition of limestone to the bed. The sulfur content in the lignin had a significantly positive effect on reducing the alkali chloride content in the deposits, thus reducing the high temperature corrosion risk.

Characterization of Impressed Current Technique to Model Corrosion of Reinforcement in Concrete

2020 ◽  
Vol 11 (1) ◽  
pp. 93-99
Author(s):  
Abu Zakir Morshed ◽  
Sheikh Shakib ◽  
Tanzim Jahin
Keyword(s):  
Immersion Time ◽  
Chloride Content ◽  
Engineering Science ◽  
Coastal Regions ◽  
Faraday’S Law ◽  
Current Technique ◽  
Corrosion Cell ◽  
Impressed Current

Corrosion of reinforcement is an important durability concern for the structures exposed to coastal regions. Since corrosion of reinforcement involves long periods of time, impressed current technique is usually used to accelerate the corrosion of reinforcement in laboratories. Characterization of impressed current technique was the main focus of this research,which involved determination of optimum chloride content and minimum immersion time of specimens for which the application of Faraday’s law could be efficient. To obtain optimum chloride content, the electrolytes in the corrosion cell were prepared similar to that of concrete pore solutions. Concrete prisms of 200 mm by 200 mm by 300 mm were used to determine the minimum immersion time for saturation. It was found that the optimum chloride content was 35 gm/L and the minimum immersion time for saturation was 140 hours. Accounting the results, a modified expression based on Faraday’s law was proposed to calculate weight loss due to corrosion. Journal of Engineering Science 11(1), 2020, 93-99

VALLOUREC VM 125 13Cr SS

Alloy Digest ◽  
2016 ◽  
Vol 65 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Steel ◽  
Chloride Content ◽  
Sour Service

Abstract Vallourec VM 125 13Cr SS is a 13Cr super martensitic steel for use in oil country tubular goods as a material suitable for sour service. The CY version offers corrosion and SCC resistance on a greater usage domain than API L80-13Cr in terms of temperature and chloride content. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: SS-1254. Producer or source: Vallourec USA Corporation.

Sign in / Sign up

Export Citation Format

Share Document