Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Heating, Ventilation, and Air Conditioning Systems

2011 ◽  
Author(s):  
none,
Keyword(s):  
Air Conditioning ◽  
Energy Savings ◽  
Research Development ◽  
Commercial Building ◽  
Air Conditioning Systems

Use of Solar Desiccant Air-Conditioning Systems in Commercial Buildings

Solar Energy ◽  
2005 ◽  
Author(s):  
Anthony Domenic Calderone ◽  
Mir-Akbar Hessami ◽  
Stefan Brey
Keyword(s):  
Air Conditioning ◽  
Greenhouse Gas Emission ◽  
Electrical Energy ◽  
Sole Source ◽  
Solar Thermal ◽  
Commercial Building ◽  
Solar Thermal Energy ◽  
Cooling Cycle ◽  
Solar Thermal Collectors ◽  
Air Conditioning Systems

Desiccant air conditioning systems provide an environmentally friendly alternative to the traditional methods of conditioning a building’s internal environment. Whilst conventional air conditioning systems rely on electrical energy to drive the cooling cycle, desiccant cooling is a heat driven cycle. As such, desiccant cooling provides an opportunity to be coupled with solar thermal collectors to reduce energy demands. This paper discusses the potential for a desiccant cooling cycle utilising solar thermal energy as the sole source of heat for regeneration of the desiccant. The study demonstrates that under the assumed design conditions this system will theoretically not require a regeneration heater. Installation of such a system in a commercial building would be extremely beneficial in reducing building’s energy consumption and therefore greenhouse gas emission.

scholarly journals Fault Detection and Diagnosis of Air Handling Unit: A Review

2019 ◽  
Vol 255 ◽  
pp. 06001 ◽  
Author(s):  
Cheng Yew Leong
Keyword(s):  
Fault Detection ◽  
Air Conditioning ◽  
Early Stage ◽  
Fault Detection And Diagnosis ◽  
Commercial Building ◽  
Air Handling Unit ◽  
Operations And Maintenance ◽  
Detection And Diagnosis ◽  
Air Conditioning Systems ◽  
And Control

Air-conditioning systems consumed the most energy usage nearly 45% of the total energy used in commercial-building. Where AHU is one of the most extensively operated equipment and this device is typical customize and complex which can results in hardwire failure and controller errors. The efficiency of the system is very much depending on the proper functioning of sensors. Faults arising from the sensors and control systems are a major contribution to the energy wastage. As such faults often go unnoticed for extended periods of time until the deterioration in performance becomes great enough to trigger comfort complaints or total equipment failure. Energy could be reduced if those faults can be detected and identified at early stage. This paper aims to review of various existing automated fault detection and diagnosis (AFDD) methods for an Air Handling Unit. The background of AHU system, general fault detection and diagnosis framework and typical faults in AHU is described. Comparison and evaluation of the various methodologies will be reviewed in this paper. This comparative study also reveals the strengths and weaknesses of the different approaches. The important role of fault diagnosis in the broader context of air- conditioning is also outlined. By identifying and diagnosing faults to be repaired, these techniques can benefits building owners by reducing energy consumption, improving indoor air quality and operations and maintenance.

scholarly journals Dynamic simulation of indirect air conditioning systems with optimized computational time

2019 ◽  
Vol 111 ◽  
pp. 04042
Author(s):  
Nicolás Ablanque ◽  
Santiago Torras ◽  
Carles Oliet ◽  
Joaquim Rigola ◽  
Carlos-David Pérez-Segarra
Keyword(s):  
Air Conditioning ◽  
Energy Savings ◽  
Control Strategies ◽  
Model Potential ◽  
Hvac Systems ◽  
Object Oriented Programming ◽  
Computational Time ◽  
Air Conditioning System ◽  
Numerical Resolution ◽  
Air Conditioning Systems

The simulation of HVAC systems is a powerful tool to improve the energy efficiency in buildings. The modelling of such systems faces several obstacles due to both the physical phenomenology present and the numerical resolution difficulties. The present work is an attempt to develop a robust, fast, and accurate model for HVAC systems that can interact with the other relevant systems involved in buildings thermal management. The whole system model has been developed in the form of libraries under the Modelica language to exploit its advantageous characteristics: object-oriented programming, equationbased modelling, and handling of multi-physics. The global resolution is carried out dynamically so that not only steady-state predictions can be conducted but also control strategies can be studied over meaningful periods of time. This latter aspect is crucial for optimizing energy savings. The libraries include models for all the system individual components such as pumps, compressors or heat exchangers (operating with twophase flows and/or moist air) and also models assemblies to account for vapour compression units and liquid circuits. An illustrative example of an indirect air conditioning system is detailed in the present work in order to highlight the model potential.

scholarly journals Calculation of marine air conditioning systems based on energy savings

2017 ◽  
Vol 11 (21) ◽  
pp. 103
Author(s):  
Ricardo A. Lugo-Villalba ◽  
Mario Álvarez Guerra ◽  
Bienvenido Sarria López
Keyword(s):  
Air Conditioning ◽  
Energy Savings ◽  
Waste Heat ◽  
Cooling Capacity ◽  
Efficient Operation ◽  
Average Value ◽  
Economic Operation ◽  
International Policies ◽  
Need To Evaluate ◽  
Air Conditioning Systems

The development of ship propulsion in the areas of Economic Operation, Environmental Protection and Ship Efficiency (Triple E - Economy, Environment, Efficiency) is the comparison standard of the manufacturers of contemporary ships. The standard is based on the application of a more modern design of the diesel engines, the wide use of waste heat and the efficient operation of the ship.In accordance with the Economic Operation, the need to evaluate the design of air conditioning systems has been identified in order to determine the possible savings, which are represented by a decrease in fuel consumption, as a result of: the significant impact of this consumption in the operation of the ship, the current high costs of this energy, the periodic increase in the price of the same, and the international policies for the reduction of emissions to the atmosphere and preservation of the environment.By means of the energy diagnosis of the air conditioning system it is possible to determine the possible opportunities of energy saving during the operation of the ship.The results indicate that the thermal load and the cooling capacity required by the air conditioned spaces have a difference between their maximum and average value of 14%. This justifies the need to use a conditioning system with a variable volume of air supplied to the air conditioned space.

scholarly journals 403 Case Study of Measures for Energy Savings of Air-Conditioning Systems in Data Centers

2011 ◽  
Vol 2011.21 (0) ◽  
pp. 248-251
Author(s):  
Ari YOSHII ◽  
Yosuke UDAGAWA ◽  
Masahide YANAGI ◽  
Shisei WARAGAI ◽  
Keigo MATSUO ◽  
...  
Keyword(s):  
Air Conditioning ◽  
Data Centers ◽  
Energy Savings ◽  
Air Conditioning Systems

scholarly journals Experimental studies of energy efficiency of heat pump equipment for hot water supply and air conditioning systems in apartment buildings

2021 ◽  
Vol 937 (4) ◽  
pp. 042037
Author(s):  
Gregory Vasilyev ◽  
Victor Gornov ◽  
Marina Kolesova ◽  
Vitaliy Leskov ◽  
Victoria Silaeva ◽  
...  
Keyword(s):  
Water Supply ◽  
Heat Pump ◽  
Air Conditioning ◽  
Energy Savings ◽  
Experimental Studies ◽  
Hot Water ◽  
Apartment Buildings ◽  
Pump Equipment ◽  
Hot Water Supply ◽  
Air Conditioning Systems

Abstract Experimental studies of this article are aimed at solving the problem of reforming the housing and communal services of Russia through rational integration of non-traditional energy sources and secondary energy resources into the energy balance of buildings and structures. An important component of the work was the creation and development of industrial production of reliable competitive heat pump systems of a new generation, cogenerating heat energy and cold in an autonomous mode and providing energy savings of at least 50% due to the combined use of low-potential thermal energy of the soil, the atmospheric air and the exhaust air of ventilation systems for hot water supply and air conditioning systems of apartment buildings.

Experiences With Thermal Driven, Desiccant Assisted Air Conditioning Systems in Germany

2007 ◽  
Author(s):  
G. Schmitz ◽  
A. Joos ◽  
W. Casas
Keyword(s):  
Air Conditioning ◽  
Power Plants ◽  
Energy Savings ◽  
Measurement Data ◽  
Electricity Consumption ◽  
Heating System ◽  
Primary Energy ◽  
Dew Point ◽  
Water Evaporation ◽  
Air Conditioning Systems

During summer, the use of conventional electrically driven air conditioning systems often results in high electricity consumption. On the other hand, heat demand is very low, therefore heat from Combined Heat and Power plants (CHP) or from solar collectors can not be used. Thermal driven desiccant assisted air conditioning systems offer the possibility to shift energy requirements from electricity to heat. Furthermore, as sorptive pre-drying air doesn’t require cooling under dew point for dehumidifying nor any subsequent heating, cold sources at higher temperatures (e.g. 18°C) can be used for cooling. Within the scope of research projects, different demonstration plants for office buildings and a private bungalow were built, where the operations were evaluated by the Hamburg University of Technology. One plant combines a desiccant wheel with a small (5 kWel) gas driven co-generation plant. Instead of an electric chiller or a water evaporation system (desiccant evaporating cooling), borehole heat exchangers in combination with a radiant floor heating system were used for cooling in summer. In this paper, performance comparisons with conventional systems based on numerical simulations and measurement data are shown, including a cost analysis. It is found that the combination of desiccant wheels and earth energy systems offers considerable energy savings compared to conventional electric systems. The operation of such systems is also cost-effective. It can lead to a reduction of up to 28% of primary energy consumption in a whole year compared to a conventional A/C system.

scholarly journals Power Consumption: Base Stations of Telecommunication in Sahel Zone of Cameroon: Typology Based on the Power Consumption—Model and Energy Savings

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Albert Ayang ◽  
Paul-Salomon Ngohe-Ekam ◽  
Bossou Videme ◽  
Jean Temga
Keyword(s):  
Power Consumption ◽  
Air Conditioning ◽  
Energy Savings ◽  
Base Station ◽  
Energy Model ◽  
Base Stations ◽  
Consumption Model ◽  
Lighting Systems ◽  
Energy Audits ◽  
Air Conditioning Systems

In this paper, the work consists of categorizing telecommunication base stations (BTS) for the Sahel area of Cameroon according to their power consumption per month. It consists also of proposing a model of a power consumption and finally proceeding to energy audits in each type of base station in order to outline the possibilities of realizing energy savings. Three types of telecommunication base stations (BTS) are found in the Sahel area of Cameroon. The energy model takes into account power consumption of all equipment located in base stations (BTS). The energy audits showed that mismanagement of lighting systems, and of air-conditioning systems, and the type of buildings increased the power consumption of the base station. By applying energy savings techniques proposed for base stations (BTS) in the Sahel zone, up to 17% of energy savings are realized in CRTV base stations, approximately 24.4% of energy are realized in the base station of Missinguileo, and approximately 14.5% of energy savings are realized in the base station of Maroua market.

Sign in / Sign up

Export Citation Format

Share Document