scholarly journals Advancing Residential Retrofits in the Mixed Humid Climate to Achieve Deep Energy Savings: Final Report on Knoxville, TN Homes

2012 ◽  
Author(s):  
Philip R Boudreaux ◽  
Kaushik Biswas ◽  
Roderick K Jackson
Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6597
Author(s):  
Ahmet Bircan Atmaca ◽  
Gülay Zorer Gedik ◽  
Andreas Wagner

Mosques are quite different from other building types in terms of occupant type and usage schedule. For this reason, they should be evaluated differently from other building types in terms of thermal comfort and energy consumption. It is difficult and probably not even necessary to create homogeneous thermal comfort in mosques’ entire usage area, which has large volumes and various areas for different activities. Nevertheless, energy consumption should be at a minimum level. In order to ensure that mosques are minimally affected by outdoor climatic changes, the improvement of the properties of the building envelope should have the highest priority. These optimal properties of the building envelope have to be in line with thermal comfort in mosques. The proposed method will be a guide for designers and occupants in the design process of new mosques or the use of existing mosques. The effect of the thermal properties of the building envelope on energy consumption was investigated to ensure optimum energy consumption together with an acceptable thermal comfort level. For this purpose, a parametric simulation study of the mosques was conducted by varying optical and thermal properties of the building envelope for a temperature humid climate zone. The simulation results were analyzed and evaluated according to current standards, and an appropriate envelope was determined. The results show that thermal insulation improvements in the roof dome of buildings with a large volume contributed more to energy savings than in walls and foundations. The use of double or triple glazing in transparent areas is an issue that should be considered together with the solar energy gain factor. Additionally, an increasing thickness of thermal insulation in the building envelope contributed positively to energy savings. However, the energy savings rate decreased after a certain thickness. The proposed building envelope achieved a 33% energy savings compared to the base scenario.


Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5038
Author(s):  
Goopyo Hong ◽  
Chul Kim ◽  
Jun Hong

In commercial buildings, HVAC systems are becoming a primary driver of energy consumption, which already account for 45% of the total building energy consumption. In the previous literature, researchers have studied several energy conservation measures to reduce HVAC system energy consumption. One of the effective ways is an economizer in air-handling units. Therefore, this study quantified the impact of the outdoor air fraction by economizer control type in cooling system loads based on actual air-handling unit operation data in a hospital. The optimal outdoor air fraction and energy performance for economizer control types were calculated and analyzed. The result showed that economizer controls using optimal outdoor air fraction were up to 45% more efficient in cooling loads than existing HVAC operations in the hospital. The energy savings potential was 6–14% of the differential dry-bulb temperature control, 17–27% of the differential enthalpy control, 8–17% of the differential dry-bulb temperature and high-limit differential enthalpy control, and 16–27% of the differential enthalpy and high-limit differential dry-bulb temperature control compared to the no economizer control. The result of this study will contribute to providing a better understanding of economizer controls in the hospital when the building operates in hot-humid climate regions.


Author(s):  
R. David Beltrán ◽  
Juan Kastillo ◽  
Isabel Miño-Rodríguez ◽  
Carlos Naranjo-Mendoza ◽  
Carlos Ávila

Natural ventilation has been studied as an effective strategy in order to reduce energy consumption without compromising occupant’s hygrothermal comfort in warm-humid climates. However, the main concern about the current state of art in the use of Building Energy Simulation (BES) as an approach to natural ventilation is the definition of input data which usually do not represent the real state of the buildings in the studied region. Within this context, the main contribution of this research is to propose a methodology through which the real state of buildings can be evaluated. By this analysis, valid input parameters was found to exploit the capabilities of BES and CFD simulations to fulfill the main objective of this study, which is to assess the impact of natural ventilation strategies in the energy consumption of HVAC systems and occupants hygrothermal comfort. Four natural ventilation strategies were evaluated: single sided ventilation, cross ventilation, solar chimney and double façade. The results show that the exclusive use of natural ventilation is ineffective to ensure hygrothermal comfort in a building with high thermal loads in a warm-humid climate like Guayaquil. However, by using a hybrid system (natural ventilation/dehumidification and cooling) cooling energy consumption can be reduced in up to 10.6% without compromising occupant’s hygrothermal comfort. Due to the promising results regarding energy savings, further research will aim to evaluate the impact of other passive strategies in energy consumption.


2011 ◽  
Author(s):  
Michael C. Baechler ◽  
Marye G. Hefty ◽  
Pamala C. Cole ◽  
Karen Adams ◽  
Christine F. Noonan

Author(s):  
Stillman Jordan ◽  
Randall D. Manteufel

An optimal air distribution design accomplishes both comfort and ventilation requirements while consuming as little energy as possible. This paper analyzes four different air distribution systems and technologies including single duct variable air volume air handlers, chilled beam cooling systems, total energy recovery wheels, displacement ventilation, and dedicated outside air systems; in an effort to determine the best air distribution system for a representative section of a school in hot and humid climate. The effectiveness of the air distribution systems is evaluated by analyzing how the different technologies take advantage of the natural convective properties of air to create a comfortable environment for the occupied region of the space. Distribution effectiveness and energy consumption must be weighed against considerations such as system complexity and ease of operation. This paper compares several alternative air distribution systems to a baseline single inlet VAV system that is commonly used in new schools designed today. Calculations show that the total energy recovery wheels result in a 16% energy savings over the baseline air distribution system because of the large amount of outside air required in school buildings. Chilled beams are not well suited for schools because of the large amount of outside air required by the space and the sophisticated design and operation needed to prevent condensation from occurring at the chilled beam. The results show that the air distribution system that consumes the least amount of energy is a displacement ventilation system. The system also inherently promotes better indoor air quality as it allows air to naturally rise out and return out of the space with minimal mixing of contaminates that may be recirculated within the room for others to breath. The displacement ventilation system’s overall energy savings of 20% over the baseline is mainly attributed to its total energy recovery wheel and the system’s ability to drastically reduce the cooling load seen by the air cooled chiller by effectively ventilating spaces using less outside air.


1987 ◽  
Author(s):  
B.J. Harrer ◽  
J.W. Tawil ◽  
A.J. Lyke ◽  
L.A. Nieves ◽  
E.S. Edin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document