scholarly journals Nitrogen and phosphorus adsorption in aqueous solutions by humic acids from weathered coal: isotherm, kinetics and thermodynamic analysis

2019 ◽  
Vol 79 (11) ◽  
pp. 2175-2184 ◽  
Author(s):  
Dan Liu ◽  
Zhanbin Huang ◽  
Shuhui Men ◽  
Zhen Huang ◽  
Chunrong Wang
Keyword(s):  
Humic Acids ◽  
Freundlich Isotherm ◽  
Nitrogen Adsorption ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Batch Adsorption ◽  
Nitrogen And Phosphorus ◽  
Phosphorus Adsorption ◽  
X Ray ◽  
Weathered Coal

Abstract The aim of this study was to reveal the mechanism of nitrogen and phosphorus adsorption by humic acids (HAs). HAs were extracted from weathered coal and used as adsorbents of urea-N and phosphate-P in water. The effect of different factors was considered, such as the initial concentration of urea-N and phosphate-P, temperature, and pH. The surface characteristics of the HAs were analyzed by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, and Fourier transform infrared spectrometry. The results of batch adsorption experiments showed high effectiveness for nitrogen adsorption, the kinetics fitted with the pseudo-second-order model, and the isotherm followed the Langmuir model. For phosphorus adsorption, the data fitted well with the Weber and Morris model and the adsorption isotherms followed both the Langmuir and Freundlich isotherm models. The experimental results indicated that the adsorption behavior of HAs was both an endothermic and spontaneous process. These findings can be used as a reference for the mitigation of non-point source pollution and the application of fertilizer in agriculture.

scholarly journals Adsorption of Toluene and Paraxylene from Aqueous Solution Using Pure and Iron Oxide Impregnated Carbon Nanotubes: Kinetics and Isotherms Study

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Aamir Abbas ◽  
Basim Ahmed Abussaud ◽  
Ihsanullah ◽  
Nadhir A. H. Al-Baghli ◽  
Halim Hamid Redhwi
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solution ◽  
Iron Oxide ◽  
Multiwall Carbon Nanotubes ◽  
Freundlich Isotherm ◽  
Nitrogen Adsorption ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Analysis ◽  
Kinetics And Isotherms

Multiwall carbon nanotubes (CNTs) and iron oxide impregnated carbon nanotubes (CNTs-iron oxide) were investigated for the adsorption of hazardous toluene and paraxylene (p-xylene) from aqueous solution. Pure CNTs were impregnated with iron oxides nanoparticles using wet impregnation technique. Various characterization techniques including thermogravimetric analysis, scanning electron microscopy, elemental dispersion spectroscopy, X-ray diffraction, and nitrogen adsorption analysis were used to study the thermal degradation, surface morphology, purity, and surface area of the materials. Batch adsorption experiments show that iron oxide impregnated CNTs have higher degree of removal of p-xylene (i.e., 90%) compared with toluene (i.e., 70%), for soaking time 2 h, with pollutant initial concentration 100 ppm, at pH 6 and shaking speed of 200 rpm at 25°C. Pseudo-second-order model provides better fitting for the toluene and p-xylene adsorption. Langmuir and Freundlich isotherm models demonstrate good fitting for the adsorption data of toluene and p-xylene.

scholarly journals Bentonite Modified by Allylamine Polymer for Adsorption of Amido Black 10B

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 502 ◽  
Author(s):  
Wenjuan Guo ◽  
Tingcheng Xia ◽  
Meishan Pei ◽  
Yankai Du ◽  
Luyan Wang
Keyword(s):  
Dye Removal ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Amido Black 10B ◽  
Amido Black ◽  
New Type

The main object of this work is to remove Amido black 10B using a new type of bentonite-based adsorbent with cationic groups by the modification of polyallyl amines between the interlayers of bentonite. Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy were used to characterize the functionalized bentonite. A series of batch adsorption experiments were performed. The maximum adsorption amount was 144.08 mg g−1 when the pH was 2 and the contact time was 120 min. In addition, the equilibrium isotherm data were analyzed using Langmuir and Freundlich isotherm models, while only the Langmuir model could provide a high correlation. Therefore, this study provided a new functionalized bentonite as a low-cost adsorbent for dye removal from water.

scholarly journals Fly Ash Coated with Magnetic Materials: Improved Adsorbent for Cu (II) Removal from Wastewater

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 63
Author(s):  
Maria Harja ◽  
Gabriela Buema ◽  
Nicoleta Lupu ◽  
Horia Chiriac ◽  
Dumitru Daniel Herea ◽  
...  
Keyword(s):  
Fly Ash ◽  
Adsorption Capacity ◽  
Copper Ions ◽  
Synthetic Wastewater ◽  
Bet Surface Area ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Copper Adsorption ◽  
X Ray

Fly ash/magnetite material was used for the adsorption of copper ions from synthetic wastewater. The obtained material was characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) surface area, and vibrating sample magnetometer (VSM). Batch adsorption experiments were employed in order to investigate the effects of adsorbent dose, initial Cu (II) concentration and contact time over adsorption efficiency. The experimental isotherms were modeled using Langmuir (four types of its linearization), Freundlich, Temkin, and Harkins–Jura isotherm models. The fits of the results are estimated according to the Langmuir isotherm, with a maximum adsorption capacity of 17.39 mg/g. The pseudo-second-order model was able to describe kinetic results. The data obtained throughout the study prove that this novel material represents a potential low-cost adsorbent for copper adsorption with improved adsorption capacity and magnetic separation capability compared with raw fly ash.

scholarly journals Adsorption Study of Soluos Dumpsite Leachate Treatment Using Musa sapientum Peels as Biosorbent

2021 ◽  
pp. 26-35
Author(s):  
L. Salami ◽  
D. O. Olumuyiwa ◽  
E. A. Alfred ◽  
O. S. Olakanmi
Keyword(s):  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Coefficient Of Determination ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Model ◽  
Leachate Treatment ◽  
Adsorbent Dosage ◽  
Musa Sapientum ◽  
Pass Through

Dumpsite leachate has the potential to pollute ground and surface water as well as vegetation within the vicinity of the dumpsite.  Its treatment therefore needs adequate attention. The aim of this work is to study the adsorption of Soluos dumpsite leachate treatment using Musa sapientum peel as biosorbent with a view of establishing the adsorption isotherm model. Musa sapientum peels sourced from Ayetoro market in Epe area of Lagos State, Nigeria were used to prepare the adsorbent. Batch adsorption was carried out with various dosage of the prepared absorbent in leachate collected from Soluos dumpsite in Lagos. The adsorption data obtained were fitted into Linear, Freundlich, Langmuir, Temkin and Hasley isotherm models. The results showed that the concentration of total dissolved solids (TDS) in the dumpsite leachate decreased as the adsorbent dosage increased. At adsorbent dosage of 10 g/L, the concentration of TDS in the leachate was 485.7 mg/L which was less than the 500 mg/L stipulated by National Environmental Standard and Regulatory Agency (NAESRA) for the discharge of wastewater. The coefficient of determination (R2) values for Linear, Freundlich and Hasley, Langmuir and Temkin isotherm models were 0.9944, 0.9936, 0.8562 and 0.9723 respectively. Linear isotherm model was jettisoned because the plot did not pass through the origin and Freundlich isotherm model was ignored as a result of N value which was less than unity hence Hasley isotherm model was adopted in this work. A good correlation existed between the experimental and predicted values, having a R2 value of 0.9965 which further validated the Hasley isotherm model as the best adsorption model for the treatment of Soluos dumpsite leachate using Musa sapientum peel as biosorbent. It was concluded that Musa sapientum peel as biosorbent can be used for treatment of Soluos dumpsite leachate.

Removal of Cu, Fe, and Zn from Peat Water by Using Activated Carbon Derived from Oil Palm Leaves

2021 ◽  
Vol 1162 ◽  
pp. 65-73
Author(s):  
Rakhmawati Farma ◽  
Ona Lestari ◽  
Erman Taer ◽  
Apriwandi ◽  
Minarni ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Oil Palm ◽  
Activated Carbons ◽  
Nitrogen Adsorption ◽  
Surface Characteristics ◽  
Batch Adsorption ◽  
X Ray ◽  
Turbidity Level ◽  
Adsorption Desorption

Heavy metal such as Cu, Fe, and Zn are the most serious contributers to environmental problems. The removal of heavy metal from the environment is the research interest nowdays. The adsorption of Cu, Fe and Zn from wastewater was investigated with various activated carbons as adsorbents. The activated carbons were produced from oil palm leaves by using multi-activation methods. The H3PO4, NaOH, ZnCl2 and KOH were chosen as chemical activating agents. Batch adsorption experiment was used to test the ability of activated carbon to remove Cu, Fe, and Zn from wastewater. The surface characteristics of activated carbon were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption-desorption isotherms. The Activated carbons were able to purify wastewater with a maximum turbidity level of 2.83 NTU. The AC-H3PO4 activated carbon showed the highest absorbability of Cu metal as 91.540%, while the highest absorbabilities of Zn and Fe metals were indicated by AC-KOH activated carbon of 22.853% and 82.244% absorption respectively. Therefore, these results enable the oil palm leaves to become a high potential for activated carbon as removal the heavy metals.

scholarly journals Synthesis of Copper(II) Trimesinate Coordination Polymer and Its Use as a Sorbent for Organic Dyes and a Precursor for Nanostructured Material

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1024 ◽  
Author(s):  
Gulzhian I. Dzhardimalieva ◽  
Rose K. Baimuratova ◽  
Evgeniya I. Knerelman ◽  
Galina I. Davydova ◽  
Sarkyt E. Kudaibergenov ◽  
...  
Keyword(s):  
Coordination Polymer ◽  
Organic Dyes ◽  
Methyl Violet ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Synthesis Methods ◽  
Type I ◽  
Free Energy Of Adsorption

Several important synthesis pathways for metal-organic frameworks (MOFs) were applied to determine how the synthesis methods and conditions affect the structure and adsorption capacity of the resulting samples. In the present work, three different synthesis routes were used to obtain copper trimesinate coordination polymer: Slow evaporation (A), solvothermal synthesis using a polyethylene glycol (PEG-1500) modulator (B), and green synthesis in water (C). This MOF was characterized by elemental analysis, infrared spectrometry, X-ray diffraction, scanning electron microscopy, thermogravimetry and volumetric nitrogen adsorption/desorption. The samples have permanent porosity and a microporous structure with a large surface area corresponding to the adsorption type I. The obtained MOF was tested as a sorbent to remove organic dyes methylene blue (МВ), Congo red (CR) and methyl violet (MV) as examples. Dye adsorption followed pseudo-first-order kinetics. The equilibrium data were fitted to the Langmuir and Freundlich isotherm models, and the isotherm constants were determined. Thermodynamic parameters, such as changes in the free energy of adsorption (∆G0), enthalpy (∆H0), and entropy (∆S0), were calculated. Thermolysis of copper trimesinate leads to the formation of carbon materials Cu@C with a high purity.

scholarly journals Arsenic Removal from Aqueous Solutions Using Carbon Embedded Silica and Zeolite: Column Adsorption Studies

2020 ◽  
pp. 42-53
Keyword(s):  
Aqueous Solutions ◽  
Rice Husk ◽  
Arsenic Removal ◽  
Freundlich Isotherm ◽  
Column Height ◽  
Isotherm Models ◽  
Tem Analysis ◽  
X Ray ◽  
Transmission Electron ◽  
Column Adsorption

Column adsorption of the As (III) & As (V) using rice husk mediated carbon embedded silica (CES) and zeolite (Z-RHA) has been proved promising technique rather than the other conventional methods. The present work investigates the adsorption capability of newly manufactured CES and Z-RHA to remove As (III) & As (V) from aqueous solutions. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X-ray (EDX), and Transmission electron microscopy (TEM) analysis have been investigated for the characterization of synthesized materials. The effects of different parameters like initial concentrations, column diameter, column height, particle size distribution have been investigated. The maximum removal efficiency of CES adsorbents for As (III) is 98% and for As (V) is 85%, and of Z-RHA for As (III) is 95% and for As (V) is 92%. To describe the adsorption behavior the Langmuir and Freundlich isotherm models as well as to kinetics models like Adam-Bohart, Thomas, and Yoon Nelson model were applied. Finally, to dispose of the rice husk mediated adsorbents after arsenic treatment solidification has been done.

scholarly journals Comparative Study between Zn and Cu Nano Ferrite in Removal of Heavy Metals and Microorganisms from Water

2021 ◽  
Vol 17 (4) ◽  
pp. 1-19
Author(s):  
Azhar Jabbar Bohan ◽  
Ghaed Khalef Salman ◽  
Ghaidaa Majeed Jaid
Keyword(s):  
Heavy Metals ◽  
Composite Materials ◽  
Freundlich Isotherm ◽  
Nano Particles ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorption Method ◽  
Nano Composite ◽  
Removal Of Heavy Metals

The effect of Nano composite materials (CuFe2O4 and ZnFe2O4) was studied for removal of heavy metals (Cd (II) and Pb (II)) from wastewater by batch adsorption method and explain their effect on the antimicrobial effectiveness on gram positive and negative bacteria. Nano composite materials were characterized by XRD where the result indicates that the average crystallite sizes were around 36.19 nm for ZnFe2O4 and 12.22 nm for CuFe2O4.The effect of contact time, adsorbent dose, pH and type of adsorbents was used to find the optimum condition for removal of Cd(II) and Pb(II) ions .The equilibrium adsorption data was good fitted to the Langmuir and Freundlich isotherm models, and the pseudo first-order kinetic model showed the excellent fit in adsorption equilibrium capacity. The best pH used for removal was 7. The good removal reaches at the time 45 min for cadmium and need more time for lead. When increasing dosage of adsorbents, the removal efficiency increases. Freundlich and Langmuir isotherm gave the best fit experimental data. Also, antibacterial effects of this nano particles demonstrated the effect of CuFe2O4 NPs on bacteria more than used ZnFe2O4 NPs, and the percentage of bacterial death was increased according to increase the concentration of this materials.

scholarly journals Development of Natural Cation Exchanger for the Treatment of Lead ions from Aqueous Solution

2013 ◽  
Vol 29 ◽  
pp. 34-43
Author(s):  
Puspa Lal Homagai
Keyword(s):  
Adsorption Capacity ◽  
Sugarcane Bagasse ◽  
Active Sites ◽  
Freundlich Isotherm ◽  
Saccharum Officinarum ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Fast Kinetics ◽  
Pseudo Second Order

Cellulose, hemicelluloses and lignin are the main constituents found in sugarcane (Saccharum officinarum) bagasse having many surface active sites containing hydroxyl and/or phenolic groups which are effective for chemical modification. The biowaste was first charred with concentrated sulphuric acid and then the charred aminated sugarcane bagasse (CASB) was prepared by reduction followed by oxidation. The developed bio-sorbent was characterized by SEM, TGA/DTA, FTIR and elemental analysis. Batch adsorption methods were carried out to determine Pb+2 sorption capacities at different pH ranges and sorbate concentrations. The maximum adsorption capacity for Pb+2 was found to be 323 mg g-1 with an efficiency of 98% at pH 4.The experimental data showed a good fit to Langmuir isotherm as compared to Freundlich isotherm models. The kinetics was best fitted with the pseudo-second order model. The adsorption equilibrium was attained within 20 min. The high adsorption capacity and fast kinetics results of the charred aminated sugarcane bagasse indicated that it might be potential adsorbent for the removal of lead from contaminated water. DOI: http://dx.doi.org/10.3126/jncs.v29i0.9235Journal of Nepal Chemical SocietyVol. 29, 2012Page: 34-43Uploaded date : 12/3/2013

Adsorption of 2,4,6-trichlorophenol on bentonite modified with benzyldimethyltetradecylammonium chloride

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Infrared Spectroscopy ◽  
Contact Time ◽  
Removal Rate ◽  
Organic Pollutant ◽  
Freundlich Isotherm ◽  
Solution Concentration ◽  
Isotherm Models ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pseudo Second Order

The objective of this study is to evaluate the performance and capacities of the bentonite of Maghnia, modified with benzyldimethyltetradecylammonium chloride, to remove the organic pollutant 2,4,6-Trichlorophenol (TCP). The modified sample was studied by X-ray diffraction (XRD) technique, infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) methods. The best removal rate (99.52%) was obtained at 19°C, pH 4, solution concentration of 50 mg/L, stirring speed of 180 rpm and contact time of 60 min. The results were well fitted by both Langmuir and Freundlich isotherm models and the pseudo-second-order is the best model to describe the process.

Sign in / Sign up

Export Citation Format

Share Document