scholarly journals Bentonite Modified by Allylamine Polymer for Adsorption of Amido Black 10B

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 502 ◽  
Author(s):  
Wenjuan Guo ◽  
Tingcheng Xia ◽  
Meishan Pei ◽  
Yankai Du ◽  
Luyan Wang
Keyword(s):  
Dye Removal ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Amido Black 10B ◽  
Amido Black ◽  
New Type

The main object of this work is to remove Amido black 10B using a new type of bentonite-based adsorbent with cationic groups by the modification of polyallyl amines between the interlayers of bentonite. Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy were used to characterize the functionalized bentonite. A series of batch adsorption experiments were performed. The maximum adsorption amount was 144.08 mg g−1 when the pH was 2 and the contact time was 120 min. In addition, the equilibrium isotherm data were analyzed using Langmuir and Freundlich isotherm models, while only the Langmuir model could provide a high correlation. Therefore, this study provided a new functionalized bentonite as a low-cost adsorbent for dye removal from water.

Adsorption of Hexavalent Chromium by Eucalyptus camaldulensis bark/maghemite Nano Composite

2018 ◽  
Vol 16 (12) ◽  
Author(s):  
Fatma Elcin Erkurt ◽  
Behzat Balci ◽  
Emine Su Turan
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Low Cost ◽  
Eucalyptus Camaldulensis ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
X Ray Diffraction ◽  
Nano Composite ◽  
X Ray ◽  
Independent Parameters

Abstract In the present study, Eucalyptus camaldulensis bark/maghemite composite (ECMC) was used for potential application as a low-cost adsorbent for the removal of Cr(VI) from aqueous solution. The structural characterization, morphology and elemental analysis of ECMC were performed by Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray (EDX) and X-ray Diffraction (XRD). The effects of various independent parameters, contact time, initial Cr(VI) concentration, temperature, pH, and adsorption were investigated. It was found that the adsorption capacity of ECMC increases with increasing Cr(VI) concentration and temperature. The optimum pH was found to be 2 for the removal of Cr(VI) by ECMC. The adsorption capacity was found to be 70.1 mg/g with 0.1 g ECMC at pH 2 and 30 °C. Additionally, 10 and 50 mg/L Cr(VI) were removed from 100 mL aqueous solution by 0.1 g ECMC with 99 % and 93.46 % removal efficiencies, respectively. Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Jovanovic, Smith, Koble Korringen, Vieth-Sladek and Sips Isotherm Models were applied to the experimental data to understand the adsorption mechanism better. The Freundlich Isotherm Model described the adsorption process better (R2 = 0.991) among the other isotherms studied.

An Efficient Simple Hydrothermal Method to Synthesis FeS2 Microspheres and their Optical Property

2016 ◽  
Vol 847 ◽  
pp. 72-77
Author(s):  
Yu Xuan Liang ◽  
Peng Peng Bai ◽  
Shu Qi Zheng
Keyword(s):  
Photoelectron Spectroscopy ◽  
Low Cost ◽  
Wave Length ◽  
Functional Materials ◽  
Optical And Electrical Properties ◽  
X Ray Diffraction ◽  
Synthetic Sample ◽  
X Ray ◽  
New Type ◽  
Good Uniformity

Pyrite (FeS2) is an important semiconductor material which shows various excellent optical and electrical properties and extensive applied prospect as a new-type, photoelectrical functional materials. In this study, a low cost and efficient simple hydrothermal two-step synthetic method was given to obtain FeS2 microspheres with 2-3 μm in diameter. The obtained products were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and ultraviolet and visible spectrophotometer (UV-Vis). XRD showed that the synthetic sample consisted of two crystal structures of FeS2, pyrite and marcasite. SEM observation indicated that FeS2 microspheres were well crystallized and had good uniformity. UV-Vis spectrum had a strong optical absorption in the region of 200-400 nm wave length. The reaction temperature had an impact on the size of FeS2 microspheres. A possible mechanism for the size of the FeS2 microspheres generated at high temperature is smaller than that at low temperature is discussed.

scholarly journals Kinetic and Thermodynamic Study of Adsorption of Copper (II) Ion on Moroccan Clay

2019 ◽  
Vol 9 (2) ◽  
pp. 102-115
Author(s):  
Hanane Essebaai ◽  
Ilham Ismi ◽  
Ahmed Lebkiri ◽  
Said Marzak ◽  
El Housseine Rifi
Keyword(s):  
Contact Time ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
X Ray Diffraction ◽  
X Ray ◽  
Increase With Increase ◽  
Monolayer Adsorption ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Kinetic And Thermodynamic Study

Highly efficient low-cost adsorbent was applied for copper (II) ions uptake from aqueous solution. Characteristics of natural adsorbent were established using scanning X-ray diffraction (XRD), X-ray fluorescence, electron microscope (SEM) and Fourier Transform Infra-Red (FTIR). Various physicochemical parameters such as contact time, initial copper(II) ions concentration, adsorbent dosage, pH of copper (II) ions solution and temperature were investigated. The result showed that the adsorption of copper (II) ions by natural clay was favorable at pH=5,5. The adsorption was found to increase with increase in initial copper (II) ions concentration, and contact time. Equilibrium adsorption data were fitted using three isotherms and kinetic data tested with four kinetic models. Freundlich isotherm best described the adsorption of copper (II) ions onto utilised clay, the maximum monolayer adsorption capacity (qmax) was 8 mg/g. Pseudo-second-order model best described the kinetics of the adsorption process. Thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined. It was found that copper (II) ions adsorption was spontaneous (ΔG°<0) and endothermic (ΔH°>0).

Adsorption of 2,4,6-trichlorophenol on bentonite modified with benzyldimethyltetradecylammonium chloride

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Infrared Spectroscopy ◽  
Contact Time ◽  
Removal Rate ◽  
Organic Pollutant ◽  
Freundlich Isotherm ◽  
Solution Concentration ◽  
Isotherm Models ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pseudo Second Order

The objective of this study is to evaluate the performance and capacities of the bentonite of Maghnia, modified with benzyldimethyltetradecylammonium chloride, to remove the organic pollutant 2,4,6-Trichlorophenol (TCP). The modified sample was studied by X-ray diffraction (XRD) technique, infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) methods. The best removal rate (99.52%) was obtained at 19°C, pH 4, solution concentration of 50 mg/L, stirring speed of 180 rpm and contact time of 60 min. The results were well fitted by both Langmuir and Freundlich isotherm models and the pseudo-second-order is the best model to describe the process.

scholarly journals Adsorption of Methylene Blue from aqueous solution using Senegal River Typha australis

2020 ◽  
Vol 10 (1) ◽  
pp. 22-32
Author(s):  
Abdoulaye Demba N'diaye ◽  
Youcef Aoulad El Hadj Ali ◽  
Mohamed Abdallahi Bollahi ◽  
Mostafa Stitou ◽  
Mohamed Kankou ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Activation Parameters ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Senegal River ◽  
Typha Australis ◽  
Equilibrium Data

In this work, batch adsorption experiments were carried out for the removal of Methylene Blue (MB) from aqueous solutions using Typha australis leaf as a low cost adsorbent. The effects of some variables governing the efficiency of the process such as adsorbent mass, pH, ionic strength, contact time and temperature were investigated. The adsorption kinetic data were analyzed using the Pseudo First Order (PFO) and Pseudo Second Order (PSO) models. The experimental equilibrium data were analyzed using Langmuir and Freundlich isotherm models. The results show that the PSO model is the best for describing the adsorption of MB by Typha australis for all initial MB concentrations. The equilibrium data fitted well with the Langmuir model with the monolayer adsorption capacity for MB-Typha australis leaf system was of 103.12 mg g-1. The values of activation parameters such as free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were also determined as - 4.44 kJ mol−1, 55.13 kJ mol−1 and 203.21 J mol−1 K−1, respectively. The thermodynamics parameters of MB-Typha australis system indicate spontaneous and endothermic process. These results indicate that the Typha australis leaf can be feasibly employed for the eradication of MB from aqueous solution.

scholarly journals Equilibrium and Kinetic Study of Removal Copper(II) from Aqueous Solution Using Chicken Eggshells: Low Cost Sorbent

Molekul ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. 28
Author(s):  
Mohammad Jihad Madiabu ◽  
Joko Untung ◽  
Imas Solihat ◽  
Andi Muhammad Ichzan
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Sorption Process ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Adsorption Condition ◽  
Pseudo Second Order ◽  
Effect Of Copper

The research aims to investigate feasibility eggshells as potential adsorbent to remove copper(II) ions from aqueous solution. Eggshells powder was characterized using X-ray diffraction, scanning electron microscopy, and Fourier transform infrared spectroscopy. Effect of copper(II) initial concentration, adsorbent dosage, and contact time have conducted. The optimum adsorption condition obtained when 0.7 g eggshells applied to 50 mg/L copper(II) solution for 50 minutes. The maximum percentage of copper(II) removal was exceeded more than 85%. Langmuir and Freundlich isotherm model were applied to describe the equilibrium adsorption. Copper(II) kinetics sorption process was fitted to pseudo-second order model with a rate constant equal to 0.516 g/mg.min. The results clearly exhibit that eggshells powder can be effectively used to remove copper(II) ions from aqueous solutions.

scholarly journals Kinetics and adsorption studies of lead (II) onto activated carbon using low cost adsorbents

2018 ◽  
Vol 20 (2) ◽  
pp. 381-388 ◽  
Keyword(s):  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Rate Limiting Step ◽  
Bambusa Vulgaris ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Fagopyrum Esculentum Moench

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch adsorption technique. All the Adsorption isotherm models fitted well with the adsorption data. However, Freundlich isotherm displayed a better fitting model than the other two isotherm models due to high correlation coefficient (R2). This indicates the applicability of multilayer coverage of the Pb (II) on the surface of adsorbent. The adsorption kinetics was studied using four simplified models and it was found to follow the pseudo-second-order kinetic model which confirmed the applicability of the model. The adsorption mechanism was found to be chemisorption and the rate-limiting step was mainly surface adsorption.

scholarly journals Batch Adsorption of Maxilon Red GRL from Aqueous Solution by Natural Sugarcane Stalks Powder

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Gamal Owes El-Sayed ◽  
Talaat Younis Mohammed ◽  
Ashraf Abd-Allah Salama
Keyword(s):  
Aqueous Solution ◽  
Dye Removal ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Textile Dye ◽  
Initial Ph ◽  
Equilibrium Data ◽  
Pseudo Second Order

Sugarcane stalks powder was tested for its efficiency of removing a textile dye Maxilon Red GRL from aqueous solution. Different parameters affecting dye removal efficiency were studied. These parameters include contact time, initial dye concentration, adsorbent dose, ionic strength, pH, and temperature. Langmuir and Freundlich isotherm models were applied to the equilibrium data. The data fitted well with the Langmuir isotherm (). The maximum monolayer adsorption capacity () was found to be 20.96 mg/g at an initial pH of 7.2. The temperature variation study showed that dye adsorption is exothermic and spontaneous with increased randomness at the solid solution interface. The results indicated that sugarcane stalks could be an alternative for more costly adsorbents used for dye removal. The kinetic of the adsorption process followed the pseudo second-order kinetics model.

scholarly journals Adsorptive Removal of Amido Black 10B from Aqueous Solution using Stem Carbon of Ricinus communis as Adsorbent

2019 ◽  
Vol 31 (5) ◽  
pp. 1071-1076
Author(s):  
Rajvir Kaur ◽  
Harpreet Kaur
Keyword(s):  
Aqueous Solution ◽  
Ricinus Communis ◽  
Low Cost ◽  
Correlation Coefficients ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Amido Black 10B ◽  
Amido Black ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

In the present work the efficiency of activated carbon made from stems of Ricinus communis (CRC) has been studied for removal of anionic dye- Amido black 10B from aqueous solution. The adsorbent has been characterized with scanning electron microscopy (SEM) and Fourier transformer infrared (FT-IR). The effects of various experimental parameters such as contact time, adsorbent dose, initial dye concentrations, pH, concentration of salt and temperature have been studied. Langmuir, Freundlich and Tempkin isotherm models have been used for describing the adsorption process. Of these, Langmuir isotherm model has best fitted the experimental data with a maximum adsorption capacity of 7.12 mg/g. Kinetics studies indicate that the adsorption of Amido black 10B has favoured toward pseudo-second-order model with high correlation coefficients. Thermodynamics parameters confirmed that the adsorption has been found to be spontaneous and endothermic in nature. These results suggested that CRC has a potential low-cost adsorbent for the removal of toxic dye Amido black 10B.

scholarly journals Adsorption of reactive blue 49 onto cross-linked chitosan-based composites containing waste mussel shell and waste active sludge char

2021 ◽  
Author(s):  
Deniz Akin Sahbaz ◽  
Sahra Dandil ◽  
Caglayan Acikgoz
Keyword(s):  
Experimental Data ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Mussel Shell ◽  
Active Sludge ◽  
X Ray ◽  
Shell Waste ◽  
Pseudo Second Order ◽  
Order Rate Equation

Abstract Cross-linked chitosan/waste mussel shell (C/WMS) and chitosan/waste mussel shell/waste active sludge char (C/WMS/WASC) composites were prepared from waste mussel shell, waste active sludge (WAS), and chitosan, were cross-linked with glutaraldehyde. The quantities of chitosan, WMS, and WASC used for the C/WMS and C/WMS/WASC composites were 1:1 and 1:0.5:0.5, respectively. The two adsorbents were characterized their quality by a scanning electron microscope (SEM), an energy-dispersive X-ray spectroscopy (EDX), and a Brunauer, Emmett and Teller (BET) analyzer. The effects of contact time (0–1,620 mins), pH (1–5), adsorbent dosage (0.01–0.1 g/50 ml), initial dye concentration (20–100 mg/L), and temperature (25–45 °C) on Reactive Blue 49 (RB49) adsorption onto C/WMS and C/WMS/WASC composites were investigated. The maximum RB49 adsorption capacity of C/WMS and C/WMS/WASC composites were 54.7 and 38.8 mg/g, respectively. The experimental data were analyzed by kinetic and isotherm models. The Freundlich isotherm was a good fit for the experimental data of RB49 adsorption on C/WMS and C/WMS/WASC composites, and the adsorption kinetics for both adsorbents were the pseudo-second-order rate equation. All results showed the preparative adsorbents can be used as effective adsorbents for the treatment of waste water contaminated with RB49 since being low cost and eco-friendly for the environment.

Sign in / Sign up

Export Citation Format

Share Document