scholarly journals Photo-degradation ibuprofen by UV/H2O2 process: response surface analysis and degradation mechanism

2017 ◽  
Vol 75 (12) ◽  
pp. 2935-2951 ◽  
Author(s):  
Mingguo Peng ◽  
Huajie Li ◽  
Xu Kang ◽  
Erdeng Du ◽  
Dongdong Li
Keyword(s):  
Aqueous Solution ◽  
Response Surface ◽  
Ph Value ◽  
Uv Light ◽  
Degradation Products ◽  
Degradation Mechanism ◽  
Oh Radical ◽  
Initial Ph ◽  
Rsm Model ◽  
Degradation Intermediates

The removal of ibuprofen (IBP) in aqueous solution using UV/H2O2 process was evaluated. The response surface methodology (RSM) and Box–Behnken design were employed to investigate the effects of process parameters on IBP removal, including the initial IBP concentration, H2O2 dosage, UV light intensity, and initial pH value of solution. The RSM model developed herein fits well with the experiments, and provides a good insight into the OH radical irritated degradation mechanisms and kinetics. High resolution accurate mass spectrometry coupled with liquid chromatography was used to identify the degradation intermediates. A total of 23 degradation products were identified, including mono-hydroxylated products and dihydroxylated products. A series of OH radical-initiated reactions, including hydroxylation, dihydroxylation, decarboxylation, demethylation, ring break, lead to the final mineralization of IBP to CO2 and H2O. UV/H2O2 technology could be a promising technology for IBP removal in aqueous solution.

scholarly journals Efficient Removal of Levofloxacin by Activated Persulfate with Magnetic CuFe2O4/MMT-k10 Nanocomposite: Characterization, Response Surface Methodology, and Degradation Mechanism

Water ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3583
Author(s):  
Junying Yang ◽  
Minye Huang ◽  
Shengsen Wang ◽  
Xiaoyun Mao ◽  
Yueming Hu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Photoelectron Spectroscopy ◽  
Degradation Mechanism ◽  
Sol Gel ◽  
Combustion Method ◽  
Copper Ferrite ◽  
X Ray ◽  
Rsm Model

In this study, a magnetic copper ferrite/montmorillonite-k10 nanocomposite (CuFe2O4/MMT-k10) was successfully fabricated by a simple sol-gel combustion method and was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), the Brunner–Emmett–Teller (BET) method, vibrating sample magnetometer (VSM), and X-ray photoelectron spectroscopy (XPS). For levofloxacin (LVF) degradation, CuFe2O4/MMT-k10 was utilized to activate persulfate (PS). Due to the relative high adsorption capacity of CuFe2O4/MMT-k10, the adsorption feature was considered an enhancement of LVF degradation. In addition, the response surface methodology (RSM) model was established with the parameters of pH, temperature, PS dosage, and CuFe2O4/MMT-k10 dosage as the independent variables to obtain the optimal response for LVF degradation. In cycle experiments, we identified the good stability and reusability of CuFe2O4/MMT-k10. We proposed a potential mechanism of CuFe2O4/MMT-k10 activating PS through free radical quenching tests and XPS analysis. These results reveal that CuFe2O4/MMT-k10 nanocomposite could activate the persulfate, which is an efficient technique for LVF degradation in water.

High Cr(VI) Adsorption Performance of Coal-Based Activated Carbon in Aqueous Solution

2013 ◽  
Vol 798-799 ◽  
pp. 1123-1127
Author(s):  
Hua Lei Zhou ◽  
Qiong Qiong Zhu ◽  
Dong Hua Huang
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Pore Structure ◽  
Ph Value ◽  
High Surface ◽  
High Surface Area ◽  
Koh Activation ◽  
Transmission Electron ◽  
Mesoporous Adsorbent ◽  
Initial Ph

The activated carbon with high surface area was prepared by KOH activation from anthracite and used as adsorbent for removal of Cr (VI) from aqueous solution. The pore structure and surface properties were characterized by N2 adsorption at 77K, transmission electron microscope (TEM) and Fourier transform infrared spectroscopy ( FTIR). Effect of pH and isotherms at different temperature were investigated. Results show that the prepared carbon is a microporous-and mesoporous-adsorbent with developed pore structure and abundant surface oxygen-containing groups. PH value of the solution plays key function on the adsorption. The chemical adsorption dominates the adsorption process. The activated carbon exhibits much higher Cr adsorption capacity than the commercial activated carbon at initial pH of ~3. The equilibrium adsorption data are fitted by both Freundlich model and Langmuir model well.

scholarly journals Kinetics, Mechanism, and Toxicity of Amlodipine Degradation by the UV/Chlorine Process

Water ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 3150
Author(s):  
Jianye Xu ◽  
Siqi Zhou ◽  
Erdeng Du ◽  
Yongjun Sha ◽  
Lu Zheng ◽  
...  
Keyword(s):  
Acute Toxicity ◽  
Advanced Oxidation Process ◽  
High Resolution Mass Spectrometry ◽  
Ph Value ◽  
Degradation Products ◽  
Degradation Mechanism ◽  
Complete Removal ◽  
Ammonia Concentration ◽  
Ammonia Nitrogen ◽  
Toxicity Tests

The UV/chlorine process, as a new type of AOP (Advanced Oxidation Process), was utilized to treat amlodipine (AML)-containing water. The influencing factors, including chlorine dose, UV intensity, solution initial pH value, and ammonia concentration, were investigated. The degradation of AML in real water and the relative contributions of OH• and Cl• were also studied. Finally, high-resolution mass spectrometry (HRMS) and GC-MS were used to identify the possible degradation products. The results demonstrated that the AML degradation process was fitted with apparent first-order kinetics. AML degradation had a positive correlation with UV intensity and chlorine dose, and a negative correlation with ammonia concentration. In the presence of ammonia nitrogen and DOM, the removal of AML from real water was reduced. OH• made a dominant percentage contribution of 55.7% to the degradation of AML. Sixteen intermediates were detected and identified. A possible degradation mechanism was also proposed. Acute toxicity tests and risk prediction both illustrated that the complete removal of AML does not guarantee the reduction of acute toxicity, but a prolonged degradation promoted the detoxification of toxic intermediates. The UV/chlorine process can be regarded to be an effective method to remove AML and reduce ecological risk.

Decolorization of azo dye C.I. Reactive Black 5 by ozonation in aqueous solution: influencing factors, degradation products, reaction pathway and toxicity assessment

2015 ◽  
Vol 73 (7) ◽  
pp. 1500-1510 ◽  
Author(s):  
Qing Zheng ◽  
Yong Dai ◽  
Xiangyun Han
Keyword(s):  
Aqueous Solution ◽  
Degradation Products ◽  
Reaction Pathway ◽  
Degradation Mechanism ◽  
Exchange Chromatography ◽  
Computational Method ◽  
Photobacterium Phosphoreum ◽  
Toxicity Tests ◽  
Reactive Black 5 ◽  
Oh Groups

In this study, ozonation treatment of C.I. Reactive Black 5 (RB5) was investigated at various operating parameters. The results showed that the aqueous solution initially containing 200 mg/L RB5 was quickly decolorized at pH 8.0 with an ozone dose of 3.2 g/h. Reaction intermediates with m/z 281, 546, 201, 350, 286 and 222 were elucidated using liquid chromatography-mass spectrometry, while sulfate ion, nitrate ion and three carboxylic acids (i.e., oxalic acid, formic acid, and acetic acid) were identified by ion exchange chromatography. Thus, the cleavage of the azo bond and the introduction of OH groups in the corresponding positions were proposed as the predominant reaction pathway. The detachment of sulfonic groups was also commonly observed during the ozonation treatment. The proposed degradation mechanism was confirmed by frontier electron density calculations, suggesting the feasibility of predicting the major events in the whole ozonation process with the computational method. Compared with RB5 degradation, the reduction of total organic carbon (TOC) proceeded much more slowly, and approximately 54% TOC was removed after 4 h of ozonation. Acute toxicity tests with Photobacterium phosphoreum showed that the toxicity of reaction solution was firstly increased and then decreased to a negligible level after 160 min.

scholarly journals Insight into the Degradation of Two Benzophenone-Type UV Filters by the UV/H2O2 Advanced Oxidation Process

Water ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1238 ◽  
Author(s):  
Erdeng Du ◽  
Jiaqi Li ◽  
Siqi Zhou ◽  
Miao Li ◽  
Xiang Liu ◽  
...  
Keyword(s):  
Emerging Contaminants ◽  
Advanced Oxidation Process ◽  
Uv Light ◽  
Degradation Products ◽  
Ring Cleavage ◽  
Contaminant Concentration ◽  
Unique Contribution ◽  
Uv Filters ◽  
Positive Effects ◽  
Rsm Model

Environmental problems caused by UV filters, a group of emerging contaminants, have attracted much attention. The removal of two typical UV filters benzophenone (BP) and 4,4′-dihydroxy-benzophenone (HBP) in water was investigated by the UV/H2O2 process. The response surface methodology (RSM) and central composite design (CCD) were applied to investigate the effects of the process parameters on the degradation rate constants, including the initial contaminant concentration, H2O2 dose, and UV light intensity. BP is more easily degraded by the UV/H2O2 process. Both processes followed pseudo-first-order kinetics. The results obtained with the built RSM model are in accordance with the experimental results (adjusted coefficients R2(adj)= 0.9835 and 0.9778 for BP and HBP, respectively). For both processes, the initial contaminant concentration (exerting a negative effect) were the most important factors controlling the degradation, followed by H2O2 dose and UV intensity (exerting positive effects). A total of 15 BP degradation products and 13 HBP degradation products during the UV/H2O2 process were identified by LC/MS and GC/MS. A series of OH radical irritated reactions, including hydroxylation, carboxylation, and ring cleavage, led to the final degradation of BP and HBP. Degradation pathways of BP and HBP were also proposed. On the whole, this work is a unique contribution to the systematic elucidation of BP and HBP degradation by the UV/H2O2 process.

Adsorption of cadmium by biochar produced from pyrolysis of corn stalk in aqueous solution

2016 ◽  
Vol 74 (6) ◽  
pp. 1335-1345 ◽  
Author(s):  
Fengfeng Ma ◽  
Baowei Zhao ◽  
Jingru Diao
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Ionic Strength ◽  
Ph Value ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Corn Stalk ◽  
Adsorbent Dosage ◽  
Initial Ph ◽  
Adsorbent Particle

The purpose of this work is to investigate adsorption characteristic of corn stalk (CS) biochar for removal of cadmium ions (Cd2+) from aqueous solution. Batch adsorption experiments were carried out to evaluate the effects of pH value of solution, adsorbent particle size, adsorbent dosage, and ionic strength of solution on the adsorption of Cd2+ onto biochar that was pyrolytically produced from CS at 300 °C. The results showed that the initial pH value of solution played an important role in adsorption. The adsorptive amount of Cd2+ onto the biochar decreased with increasing the adsorbent dosage, adsorbent particle size, and ionic strength, while it increased with increasing the initial pH value of solution and temperature. Cd2+ was removed efficiently and quickly from aqueous solutions by the biochar with a maximum capacity of 33.94 mg/g. The adsorption process was well described by the pseudo-second-order kinetic model with the correlation coefficients greater than 0.986. The adsorption isotherm could be well fitted by the Langmuir model. The thermodynamic studies showed that the adsorption of Cd2+ onto the biochar was a spontaneous and exothermic process. The results indicate that CS biochar can be considered as an efficient adsorbent.

Evaluation of heterogeneous photo-Fenton oxidation of Orange II using response surface methodology

2010 ◽  
Vol 62 (6) ◽  
pp. 1320-1326 ◽  
Author(s):  
Y. H. Gong ◽  
H. Zhang ◽  
Y. L. Li ◽  
L. J. Xiang ◽  
S. Royer ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Heterogeneous Catalyst ◽  
Uv Irradiation ◽  
Heterogeneous Catalysts ◽  
Ph Value ◽  
Dye Degradation ◽  
High Catalytic Activity ◽  
Orange Ii ◽  
Initial Ph

A mesoporous SBA-15 doped iron oxide (Fe2O3/SBA-15) was synthesized by co-codensation, characterized and used as heterogeneous catalysts for the photo-Fenton decolorization of azo dye Orange II under UV irradiation. Response surface methodology (RSM) was used to investigate operating condition effects, such as hydrogen peroxide concentration, initial pH and catalyst loadings, on the decolorization rate. UV irradiation is found to enhance the activity of the catalyst in the process. RSM analysis evidenced the influence of the initial pH value and H2O2 concentration on the dye degradation rate. The coupled UV/Fe2O3/SBA-15/H2O2 process at room temperature is revealed as a promising friendly process for wastewater treatment. Indeed, the use of a heterogeneous catalyst allows an easy active phase recycling without multi-step recovering while the heterogeneous catalyst used here exhibits high catalytic activity for the reaction considered.

Equilibrium and Thermodynamic Studies on Biosorption of Malachite Green from Aqueous Solution by Fungal Biomass

2011 ◽  
Vol 148-149 ◽  
pp. 470-473
Author(s):  
Li Fang Zhang
Keyword(s):  
Aqueous Solution ◽  
Malachite Green ◽  
Fungal Biomass ◽  
Ph Value ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Thermodynamic Studies ◽  
Biosorption Process ◽  
Initial Ph ◽  
Equilibrium Data

The biosorption of Malachite Green from aqueous solution was investigated by using pretreated fungal biomass in a batch system. The effects of initial pH, NaCl concentration, initial dye concentration and temperature on dye biosorption were studied. The results showed that the pretreated fungal biomass exhibited higher dye removal at initial pH value of 5.0-6.0. The bosorption capacity was increased with the increasing temperature in studied temperature range. The Langmuir and Freundlich isotherm models were applied to experimental equilibrium data and the Langmuir model better described the equilibrium dye uptake than the Freundlich model. Thermodynamic studies revealed that the biosorption process was successful, spontaneous and endothermic in nature.

scholarly journals Sonocatalytic degradation of methyl orange in aqueous solution using Fe-doped TiO2 nanoparticles under mechanical agitation

2018 ◽  
Vol 16 (1) ◽  
pp. 1283-1296 ◽  
Author(s):  
Shoujian Song ◽  
Changchun Hao ◽  
Xianggang Zhang ◽  
Qing Zhang ◽  
Runguang Sun
Keyword(s):  
Aqueous Solution ◽  
Methyl Orange ◽  
Response Surface ◽  
Ultrasonic Irradiation ◽  
Ph Value ◽  
Irradiation Time ◽  
Ultrasonic Frequency ◽  
Mechanical Agitation ◽  
Initial Concentration ◽  
Degradation Of Methyl Orange

AbstractIn the present study, the Fe-doped TiO2 modified nanoparticles was successfully synthesized by the combination of the sol-gel method and heat treatment, and the degradation of methyl orange was tested by the combination method of ultrasonic radiation and mechanical agitation. The effects of different factors on the degradation of methyl orange (MO) solution were studied, such as ultrasonic irradiation time, the ultrasonic frequency, the added amount of catalyst, the initial pH value, the initial concentration of methyl orange, and revolutions per minute. The optimal experimental conditions for sonocatalytic degradation of the MO obtained were: ultrasonic irradiation time = 60 min, pH value = 3.0 and revolutions per minute = 500 rpm. By means of response surface analysis, the best fitting conditions were as follows: ultrasonic frequency = 36.02 kHz, added amount of catalyst = 490.50 mg/L, the initial concentration of methyl orange = 9.22 mg/L, and the optimum condition was close to the experimental data by response surface method. Under optimal conditions, the sonocatalytic degradation of MO was 99%. The degradation of MO showed that the combination of Fe-doped modified TiO2 nanoparticles, mechanical agitation and ultrasonic irradiation was discovered that can degrade methyl orange effectively in aqueous solution.

scholarly journals Optimization of Culture Conditions for Amoxicillin Degrading Bacteria Screened from Pig Manure

2020 ◽  
Vol 17 (6) ◽  
pp. 1973 ◽  
Author(s):  
Xuanjiang Yang ◽  
Panpan Guo ◽  
Miao Li ◽  
Hualong Li ◽  
Zelin Hu ◽  
...  
Keyword(s):  
Response Surface ◽  
Ph Value ◽  
Culture Conditions ◽  
Pig Manure ◽  
Bacterial Strains ◽  
Inoculum Level ◽  
Fermentation Conditions ◽  
Culture Time ◽  
Degrading Bacteria ◽  
Initial Ph

(1) Objective: The objective of this study was to screen amoxicillin (AMX)-degrading bacterial strains in pig manure and optimize the fermentation conditions for these strains to achieve high fermentation rate, which can provide an effective way for the practical application of bacterial strains as antibiotic-degrading bacterial in treating livestock waste for antibiotic residues. (2) Methods: Antibiotic susceptibility tests and high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) were employed to screen AMX-degrading bacterial strains in pig manure. The culture conditions were optimized for AMX-degrading bacterial strains using Plackeet–Burman design (PBD), the steepest ascent design, and the response surface methods, coupled with the Box–Behnken design (BBD). The effects of culture time, temperature, rotator (mixing) speed, inoculum level, and initial pH value on the growth of AMX-degrading strains were investigated. Experimental data obtained from BBD were utilized to generate a second-order polynomial regression model for evaluating the effects of the tested variables on the optical density at 600 nm (OD600) of culture solutions as the growth indicator for the screened AMX-degrading strains. (3) Results: The initial pH, culture time, and the inoculum level had significant effects on the OD600 value (growth) of the screened AMX-degrading strains. The initial pH value was found to be the most critical factor influencing the growth of bacteria. The optimized culture condition for the bacterial growth determined by the response surface methodology was: the initial pH of 6.9, culture time of 52 h, and inoculum level of 2%. The average OD value of 12 different fermentation conditions in the initial fermentation tests in this study was 1.72 and the optimization resulted in an OD value of 3.00. The verification experiment resulted in an OD value of 2.94, which confirmed the adequacy of the optimization model for the determining the optimal culture condition. (4) Conclusions: The growth of the screened strain of AMX-degrading bacteria could be optimized by changing the fermentation conditions. The optimization could be achieved by using the Box–Behnken response surface method and Plackett–Burman experimental design.

Sign in / Sign up

Export Citation Format

Share Document