scholarly journals Improved ammonium removal from industrial wastewater through systematic adaptation of wild type Chlorella pyrenoidosa

2016 ◽  
Vol 75 (1) ◽  
pp. 182-188 ◽  
Author(s):  
Asma Ahmed ◽  
Nimmakayala Jyothi ◽  
Adithya Ramesh
Keyword(s):  
Light Intensity ◽  
Industrial Wastewater ◽  
Treatment Plant ◽  
Industrial Effluents ◽  
Chlorella Pyrenoidosa ◽  
Single Step ◽  
Effluent Treatment ◽  
Ammonium Removal ◽  
Effluent Treatment Plant ◽  
Ammonium Tolerance

A single step process is proposed for ammonium removal from nitrogenous industrial effluents, with a concomitant generation of algal biomass. A microalgal strain found in the effluent treatment plant of a fertilizer industry in Mumbai, India was systematically adapted to remove up to 700 ppm of ammoniacal nitrogen from industrial wastewater, which is nearly four times higher than the ammonium tolerance reported in the literature as well as other algal strains tested in our laboratory. 18S rRNA sequencing revealed the strain to be Chlorella pyrenoidosa. Effects of process parameters such as pH, temperature and light intensity on cell growth and ammonium removal by the adapted cells were studied. Optimal conditions were found to be pH of 9, temperature of 30 °C and a light intensity of 3,500 Lux for the adapted cells.

scholarly journals Investigation of Effluent Quality from an Effluent Treatment Plant of a Textile Industry, Fakir Knitwear Ltd. Narayangonj, Bangladesh

2016 ◽  
Vol 8 (2) ◽  
pp. 25-31 ◽  
Author(s):  
MRH Sarker ◽  
A Razzaque ◽  
MM Hoque ◽  
S Roy ◽  
MK Hossain
Keyword(s):  
Textile Industry ◽  
Treatment Plant ◽  
Industrial Effluents ◽  
Quality Parameters ◽  
Effluent Treatment ◽  
Effluent Quality ◽  
Effluent Treatment Plant ◽  
Standard Quality ◽  
Set Up ◽  
Better Than

Textile industries are the major contributor to environmental pollution and health hazards by generating huge amount of effluents that contain several pollutants and coloring agents. The concentration of these pollutants can be reduced to the permissible limit with the help of an Effluent Treatment Plant (ETP). The study was conducted to observe the textile effluent management techniques of an Effluent Treatment Plant (ETP) of Fakir Knitwear Limited (FKL), Narayanganj, Bangladesh. FKL set up a biological treatment plant to treat the effluent generated by the industry. Different effluent quality parameters were investigated at different stages in ETP. The effluent of the outlet was dark colored probably because of soluble coloring materials of the effluent but it is comparatively better than that of raw wastewater. There were found higher EC values than the standards which indicated that the greater amount of salts in the water due to dumping of solid wastes and discharging of industrial effluents. The highest TDS value 2054 ppm was observed at the screening pit unit than the other parts of the ETP. The highest DO was found 4.58 ppm in clarification tank which was within the standard value of aquaculture. The study also showed that the lowest BOD (24 ppm) and COD (145 ppm) was found at the outlet which was comparatively better than others. Although the effluent from the outlet contained pollutants, these effluent quality was comparatively good than the untreated waste water discharged from the industry. After treatment, the effluent of outlet moderately ensures the standard quality for aquaculture and irrigation. The results suggested that it is obvious to run the ETP regularly to improve the quality of effluents to save our native environment from the harmful effects of wastewater.J. Environ. Sci. & Natural Resources, 8(2): 25-31 2015

scholarly journals Treatment of Common Effluent Treatment Plant Pollutant under Growing & Non-growing Condition of Biomass

2020 ◽  
pp. 15-21
Author(s):  
Shipra Jha ◽  
S. N. Dikshit
Keyword(s):  
Heavy Metals ◽  
Environmental Concern ◽  
Industrial Effluent ◽  
Treatment Plant ◽  
Industrial Effluents ◽  
Industrial Applications ◽  
Effluent Treatment ◽  
Effluent Treatment Plant ◽  
Living Tissues ◽  
Incomplete Treatment

Heavy metal pollution in wastewater has always been a serious environmental problem because heavy metals are not biodegradable and can be accumulated in living tissues. Copper is widely used in various important industrial applications. The increasing level of heavy metals in the aquatic system due to incomplete treatment of industrial wastewater by existing conventional methods is of environmental concern. Therefore, there has been an increasing interest in the possibility of using biological treatments. It is important to evaluate the performance of biomass with actual industrial effluent to ensure its field applicability. Hence the experiments were conducted with actual industrial effluents collected from Effluent Treatment Plant (ETP) and tannery industry.

Study on corrosion investigations in industrial effluents: a review

2019 ◽  
Vol 37 (2) ◽  
pp. 115-130
Author(s):  
Chhotu Ram ◽  
Bushra Zaman ◽  
Amit Dhir
Keyword(s):  
Present Report ◽  
Treatment Plant ◽  
Industrial Effluents ◽  
Paper Mill ◽  
Effluent Treatment ◽  
Paper Mill Effluents ◽  
Effluent Treatment Plant ◽  
Calcium Nitrite ◽  
Materials Used ◽  
Ph Level

AbstractCorrosion affects the usefulness of metallic materials used in the construction of an effluent treatment plant (ETP). The present report investigates the corrosive and inhibitive properties of the chemicals present in the effluent of paper mill and distillery industries. Chemicals such as chloride, chlorophenols, phosphate, calcium, nitrite, and nitrate enhance corrosion, whereas the presence of sulfate, potassium, organic matter, and melanoidins (color) inhibits corrosion at an acidic pH level in distillery and paper mill effluents. A finding shows that pH level has an important role in increasing or decreasing the effect on corrosivity of effluents.

scholarly journals Green Gold from Dairy Industry: A Self-Sustained Eco-Friendly Effluent Treatment Plant

2021 ◽  
Author(s):  
Shaon Ray Chaudhuri
Keyword(s):  
Fresh Water ◽  
Dairy Industry ◽  
Treatment Plant ◽  
Single Step ◽  
Biofilm Reactor ◽  
Chemical Fertilizer ◽  
Effluent Treatment ◽  
Dairy Effluent ◽  
Sustainable Operation ◽  
Effluent Treatment Plant

The major bottleneck of dairy effluent treatment plant operation is the generation of 10 m3 of nutrient rich wastewater per m3 of milk processed resulting in an annual production of 7.93 tons of carbon dioxide equivalent (CO2 e) gas during treatment in a 7–8 step process. It is an expensive, non-ecofriendly, laborious process which is often not adoptable by the small segment installations. A carefully selected tailor-made bacterial consortium in biofilm reactor within 4 h of incubation in a single step operation under ambient condition could transform the total volume of wastewater into ammonia rich liquid biofertilizer generating 0.79 tons/year CO2 e gas. This biofertilizer replaces the use of fresh water and chemical fertilizer for agriculture, producing economic crops at par with chemical fertilizer. In certain cases, the production of crops is increased substantially over chemical fertilizer based growth. It reduced carbohydrate content of tuber crops. The generated liquid biofertilizer can overcome the shortage in fodder production without using chemical fertilizer and fresh water, hence solving one of the major concerns for sustaining the expansion of dairy industry, hence making dairy effluent treatment plant (ETP) operation an eco-friendly, self-sustainable operation.

The Efficiency of a Biological Activated Sludge Effluent Treatment Plant with Extended Aeration

1988 ◽  
Vol 20 (1) ◽  
pp. 65-72 ◽  
Author(s):  
Rurik Skogman ◽  
Reino Lammi
Keyword(s):  
Activated Sludge ◽  
Suspended Solids ◽  
Treatment Plant ◽  
Forest Products ◽  
Effluent Treatment ◽  
Chlorinated Phenols ◽  
Forest Products Industry ◽  
Effluent Treatment Plant ◽  
Closed Systems ◽  
Treating Effluent

The requirements imposed on the Finnish forest products industry by the water authorities have focused on the reduction of BOD and suspended solids in the wastewaters. The industry has tried to comply with these requirements, first through internal measures such as process changes and closed systems. When these have not been sufficient, external treatment has been resorted to. The Wilh. Schauman Company in Jakobstad has chosen activated sludge with extended aeration from among the available methods for treating effluent. The plant has operated since the beginning of 1986 with extremely good results. In addition to the reduction of BOD and suspended solids, there has been a marked decrease of chlorinated phenols. Chlorinated substances with higher molecular weight are also removed during the process.

Soft Drinks Industry Wastewater Treatment

1992 ◽  
Vol 25 (1) ◽  
pp. 45-51 ◽  
Author(s):  
Larbi Tebai ◽  
Ioannis Hadjivassilis
Keyword(s):  
Biological Treatment ◽  
Industrial Effluent ◽  
Treatment Plant ◽  
Soft Drinks ◽  
Effluent Treatment ◽  
Production Lines ◽  
Effluent Treatment Plant ◽  
Industrial Effluent Treatment ◽  
Effluent Characteristics ◽  
Industry Wastewater

Soft drinks industry wastewater from various production lines is discharged into the Industrial Effluent Treatment Plant. The traditional coagulation/flocculation method as first step, followed by biological treatment as second step, has been adopted for treating the soft drinks industry wastewaters. The performance of the plant has been evaluated. It has been found that the effluent characteristics are in most cases in correspondence with the requested standards for discharging the effluent into the Nicosia central sewerage system.

LCA of a Representative Municipal Effluent Treatment Plant

2019 ◽  
pp. 235-248
Author(s):  
Saurabh N. Joglekar ◽  
Pratik D. Solankey ◽  
Sachin A. Mandavgane ◽  
Bhaskar D. Kulkarni
Keyword(s):  
Treatment Plant ◽  
Effluent Treatment ◽  
Municipal Effluent ◽  
Effluent Treatment Plant
Sign in / Sign up

Export Citation Format

Share Document