Modeling on-site wastewater treatment system performance fragility to hydroclimate stressors

2016 ◽  
Vol 74 (12) ◽  
pp. 2917-2926 ◽  
Author(s):  
Laura E. Kohler ◽  
JoAnn Silverstein ◽  
Balaji Rajagopalan

Increasing variability of climate-related factors, especially precipitation and temperature, poses special risks to on-site wastewater treatment systems (OWTS), which depend on subsurface saturation conditions for treatment and dispersion of wastewater. We assess OWTS fragility – the degree to which a system loses functionality – as a step to characterizing the resilience of residential wastewater treatment systems. We used the frequency and indexed severity of OWTS failures and resulting repairs to quantify fragility as a function of hydroclimate variables, including precipitation, temperature and stream flow. The frequency of each category of repair (minor, moderate and major) for 225 OWTS obtained from Boulder County public health records was modeled as a function of climate factors using a generalized linear model with a Poisson distribution link function. The results show that prolonged precipitation patterns, with monthly rainfall >10.16 cm, influence OWTS fragility, and complete loss of OWTS functionality, requiring replacement, is impacted by high temperatures, frequency of wetter-than-normal months, and the magnitude of peak stream flow in the watershed. Weather-related covariates explained 70% of the variability in OWTS major repair data between 1979 and 2006. These results indicate that fragility arising from climate factors, and associated costs to owners, environmental and health impacts, should be considered in planning, design and operation of OWTS.

1989 ◽  
Vol 24 (3) ◽  
pp. 463-477
Author(s):  
Stephen G. Nutt

Abstract Based on discussions in workshop sessions, several recurring themes became evident with respect to the optimization and control of petroleum refinery wastewater treatment systems to achieve effective removal of toxic contaminants. It was apparent that statistical process control (SPC) techniques are finding more widespread use and have been found to be effective. However, the implementation of real-time process control strategies in petroleum refinery wastewater treatment systems is in its infancy. Considerable effort will need to be expended to demonstrate the practicality of on-line sensors, and the utility of automated process control in petroleum refinery wastewater treatment systems. This paper provides a summary of the discussions held at the workshop.


1996 ◽  
Vol 34 (3-4) ◽  
pp. 405-412 ◽  
Author(s):  
Andrea Deininger ◽  
Frank W. Günthert ◽  
Peter A. Wilderer

Density currents in the deeper zones of clarifiers and currents in the clear water zone have a significant influence on clarifier performance. Measurements of flow velocity profiles were conducted in full-scale horizontally flown circular secondary clarifiers. Relations between the hydraulic load and the development of density currents could be detected. Those patterns are not taken into account in current design procedures. Stationary design approaches are mainly based on the overflow rate. Novel design methods based on the dynamic behavior of flow and density distribution in clarifiers are needed in order to improve the efficacy of wastewater treatment systems.


2021 ◽  
Vol 192 ◽  
pp. 116836
Author(s):  
Jin-Na Zhang ◽  
Jun Chen ◽  
Lei Yang ◽  
Min Zhang ◽  
Li Yao ◽  
...  

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Zhongjie Wang ◽  
Wenqing Li ◽  
Hao Li ◽  
Wei Zheng ◽  
Feng Guo

Sign in / Sign up

Export Citation Format

Share Document