Evaluating photo-degradation of COD and TOC in petroleum refinery wastewater by using TiO2/ZnO photo-catalyst

2016 ◽  
Vol 74 (6) ◽  
pp. 1312-1325 ◽  
Author(s):  
Dheeaa al deen Atallah Aljuboury ◽  
Puganeshwary Palaniandy ◽  
Hamidi Bin Abdul Aziz ◽  
Shaik Feroz ◽  
Salem S. Abu Amr
Keyword(s):  
Reaction Time ◽  
Treatment Time ◽  
Removal Rate ◽  
Air Flow ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Removal Rates ◽  
Operational Conditions ◽  
Photo Catalyst

The aim of this study is to investigate the performance of combined solar photo-catalyst of titanium oxide/zinc oxide (TiO2/ZnO) with aeration processes to treat petroleum wastewater. Central composite design with response surface methodology was used to evaluate the relationships between operating variables for TiO2 dosage, ZnO dosage, air flow, pH, and reaction time to identify the optimum operating conditions. Quadratic models for chemical oxygen demand (COD) and total organic carbon (TOC) removals prove to be significant with low probabilities (<0.0001). The obtained optimum conditions included a reaction time of 170 min, TiO2 dosage (0.5 g/L), ZnO dosage (0.54 g/L), air flow (4.3 L/min), and pH 6.8 COD and TOC removal rates of 99% and 74%, respectively. The TOC and COD removal rates correspond well with the predicted models. The maximum removal rate for TOC and COD was 99.3% and 76%, respectively at optimum operational conditions of TiO2 dosage (0.5 g/L), ZnO dosage (0.54 g/L), air flow (4.3 L/min), reaction time (170 min) and pH (6.8). The new treatment process achieved higher degradation efficiencies for TOC and COD and reduced the treatment time comparing with other related processes.

scholarly journals Inorganic carbon removal from refinery wastewater by using TiO2/ZnO/Fenton photocatalyst

2018 ◽  
Vol 20 (2) ◽  
pp. 216-225
Keyword(s):  
Inorganic Carbon ◽  
Treatment Time ◽  
Removal Rate ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Refinery Wastewater ◽  
Operational Conditions ◽  
Operating Variables ◽  
Solar Photocatalyst ◽  
Quadratic Models

The aim of this study is to investigate the performance of the solar photocatalyst of TiO2/ZnO/Fenton process to treat the refinery wastewater and remove inorganic carbon (IC) which potentially toxic to human, aquatic and microorganism life. Central composite design with response surface methodology was used to evaluate the relationships between operating variables for TiO2 dosage, ZnO dosage, Fe2+ dosage, H2O2 dosage, and pH to identify the optimum operating conditions. Quadratic models for inorganic carbon (IC) removal and residual iron prove to be significant with low probabilities (<0.0001). The (IC) removal rates and residual iron correspond well with the predicted models. The maximum removal rate for IC and residual iron was 92.3% and 0.013, respectively at optimum operational conditions of a TiO2 dosage (0.3 g/l), ZnO dosage (0.58 g/l), Fe2+ dosage (0.02 g/l), H2O2 dosage (2.7 g/l), and pH (7). The treatment process achieved higher degradation efficiencies for IC and reduced the treatment time comparing with other related processes.

Optimization of leachate treatment using persulfate/H2O2 based advanced oxidation process: case study: Deir El-Balah Landfill Site, Gaza Strip, Palestine

2015 ◽  
Vol 73 (1) ◽  
pp. 102-112 ◽  
Author(s):  
Ahmed H. Hilles ◽  
Salem S. Abu Amr ◽  
Rim A. Hussein ◽  
Anwar I. Arafa ◽  
Olfat D. El-Sebaie
Keyword(s):  
Reaction Time ◽  
Advanced Oxidation Process ◽  
Gaza Strip ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Leachate Treatment ◽  
Operating Variables ◽  
Treatment Processes ◽  
N Removal

The objective of this study was to investigate the performance of employing H2O2 reagent in persulfate activation to treat stabilized landfill leachate. A central composite design (CCD) with response surface methodology (RSM) was applied to evaluate the relationships between operating variables, such as persulfate and H2O2 dosages, pH, and reaction time, to identify the optimum operating conditions. Quadratic models for the following two responses proved to be significant with very low probabilities (&lt;0.0001): chemical oxygen demand (COD) and NH3-N removal. The obtained optimum conditions included a reaction time of 116 min, 4.97 g S2O82−, 7.29 g H2O2 dosage and pH 11. The experimental results were corresponding well with predicted models (COD and NH3-N removal rates of 81% and 83%, respectively). The results obtained in the stabilized leachate treatment were compared with those from other treatment processes, such as persulfate only and H2O2 only, to evaluate its effectiveness. The combined method (i.e., /S2O82−/H2O2) achieved higher removal efficiencies for COD and NH3-N compared with other studied applications.

scholarly journals Enzymatic Transesterification of Waste Frying Oil from Local Restaurants in East Colombia Using a Combined Lipase System

2020 ◽  
Vol 10 (10) ◽  
pp. 3566
Author(s):  
Mary Angélica Ferreira Vela ◽  
Juan C. Acevedo-Páez ◽  
Nestor Urbina-Suárez ◽  
Yeily Adriana Rangel Basto ◽  
Ángel Darío González-Delgado
Keyword(s):  
Reaction Time ◽  
Methyl Esters ◽  
Enzyme Concentration ◽  
Operating Conditions ◽  
Frying Oil ◽  
Biodiesel Production ◽  
Optimum Operating ◽  
Waste Frying Oil ◽  
Production Chain ◽  
Enzymatic Transesterification

The search for innovation and biotechnological strategies in the biodiesel production chain have become a topic of interest for scientific community owing the importance of renewable energy sources. This work aimed to implement an enzymatic transesterification process to obtain biodiesel from waste frying oil (WFO). The transesterification was performed by varying reaction times (8 h, 12 h and 16 h), enzyme concentrations of lipase XX 25 split (14%, 16% and 18%), pH of reaction media (6, 7 and 8) and reaction temperature (35, 38 and 40 °C) with a fixed alcohol–oil molar ratio of 3:1. The optimum operating conditions were selected to quantify the amount of fatty acid methyl esters (FAMEs) generated. The highest biodiesel production was reached with an enzyme concentration of 14%, reaction time of 8 h, pH of 7 and temperature of 38 °C. It was estimated a FAMEs production of 42.86% for the selected experiment; however, best physicochemical characteristics of biodiesel were achieved with an enzyme concentration of 16% and reaction time of 8 h. Results suggested that enzymatic transesterification process was favorable because the amount of methyl esters obtained was similar to the content of fatty acids in the WFO.

scholarly journals Process Analysis of PMMA Dental Resins Scraps Depolimerization: Optimization of Reaction Time and Temperature

2021 ◽  
Author(s):  
Paulo Bisi dos Santos Jr. ◽  
Haroldo Jorge da Silva Ribeiro ◽  
Armando Costa Ferreira ◽  
Caio Campos Ferreira ◽  
Lucas Pinto Bernar ◽  
...  
Keyword(s):  
Refractive Index ◽  
Reaction Time ◽  
Liquid Phase ◽  
Kinematic Viscosity ◽  
Process Analysis ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Dental Resins ◽  
Liquid Products ◽  
The Cross

In this work, the cross-linked PMMA-based dental resins scraps were submitted to pyrolysis to recover MMA (Methylmethacrylate). The thermal degradation of cross-linked PMMA-based dental resins scraps was analyzed by TG/DTG to guide the operating conditions in pilot scale. The pyrolysis experiments carried out in a reactor of 143L, at 345, 405, and 420°C, 1.0 atmosphere. The reaction liquid products obtained at 345°C, physicochemical characterized for density, kinematic viscosity, and refractive index. The chemical composition of liquid products obtained at 345°C, 30, 40, 50, 60, 70, 80, and 110 minutes, at 405°C, 50, 70, and 130 minutes, and at 420°C, 40, 50, 80, 100, 110, and 130 minutes determined by GC-MS. The experiments show that liquid phase yields were 55.50%, 48.73%, and 48.20% (wt.), at 345, 405, and 420°C, respectively, showing a smooth sigmoid behavior, decreasing with increasing temperature, while that of gas phase were 31.69%, 36.60%, and 40.13% (wt.), respectively, increasing with temperature. The liquid products density, kinematic viscosity, and refractive index obtained at 30, 40, 50, 60, 70, 80, and 110 minutes, varied between 0.9227 and 0.9380 g/mL, 0.566 and 0.588 mm2/s, and 1.401 and 1.414, respectively, showing percentage deviations between 0.74 and 2.36%, 7.40 and 10.86%, and 0.00 and 0.92%, respectively, compared to standard values for density, kinematic viscosity, and refractive index of pure MMA at 20 °C. The GC-MS identified in the reaction liquid products at 345, 405, and 420°C, 1.0 atm, esters of carboxylic acids, alcohols, ketones, and aromatics, showing concentrations of MMA between 83.454 and 98.975% (area.). For all the depolymerization experiments, the concentrations of MMA in the liquid phase, between 30 and 80 minutes, reach purities above 98% (area.), decreasing drastically with increasing reaction time after 100 minutes, thus making it possible to depolymerize the cross-linked PMMA-based dental resins scraps by pyrolysis to recover MMA. The optimum operating conditions to achieve high MMA concentrations, as well as elevated yields of liquid reaction products were 345 °C and 80 minutes.

Taguchi Approach and ANOVA in Optimization of the Dissolution of Colemanite in CO2 and SO2- Water Systems

2020 ◽  
Vol 10 (2) ◽  
pp. 88-97
Author(s):  
Zafer Ekinci ◽  
Esref Kurdal ◽  
Meltem Kizilca Coruh
Keyword(s):  
Particle Size ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Gas Flow ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Process Conditions ◽  
Liquid Ratio ◽  
Positive Effects ◽  
Controllable Factors

Background: Turkey is approximately 72% of the world’s boron sources. Colemanite, tincal, ulexite and pandermite are among the most significant in Turkey. Boron compounds and minerals are widely used in many industrial fields. Objective: The main purpose of this study was to investigate the control of impurities in the boric acid production process using colemanite by carrying out the reaction with a mixture of CO2 and SO2 - water, and determining the appropriate process conditions to develop a new process as an alternative to the use of sulfuric acid. Due to worrying environmental problems, intensive studies are being carried out globally to reduce the amount of CO2 and SO2 gases released to the atmosphere. Methods: The Taguchi method is an experimental design method that minimizes the product and process variability by selecting the most appropriate combination of the levels of controllable factors compared to uncontrollable factors. Results: It was evaluated the effects of parameters such as reaction temperature, solid-to liquid ratio, SO2/CO2 gas flow rate, particle size, stirring speed and reaction time. The optimum conditions determined to be reaction temperature of 45°C; a solid–liquid ratio of 0.083 g.mL−1; an SO2/CO2 ratio of 2/2 mL.s−1; a particle size of -0.354+0 .210 mm; a mixing speed of 750 rpm and a reaction time of 20 min. Conclusion: Under optimum operating conditions, 96.8% of colemanite was dissolved. It is thought that the industrial application of this study will have positive effects on the greenhouse effect by contributing to the reduction of CO2 and SO2 emissions that cause global warming.

Research on Low Concentration Municipal Wastewater Removal Rate with Chemical-Biological Flocculation and Suspended Medium Process

2012 ◽  
Vol 599 ◽  
pp. 387-390
Author(s):  
Xing Yu Bian ◽  
Xing Sheng Kang ◽  
Yi Li ◽  
Yu Lin Sun ◽  
Min Kong ◽  
...  
Keyword(s):  
Municipal Wastewater ◽  
Removal Rate ◽  
Pilot Scale ◽  
Pollutant Removal ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Optimal Operating ◽  
Operational Parameter ◽  
Low Concentration ◽  
Scale Test

In this paper, chemical and biological flocculation and suspended medium process was applied to treat low concentration municipal wastewater in a pilot scale test in order to find the optimum operational parameter. The results showed that: system on pollutant removal mainly on chemical and biological flocculation reaction pool, Under the optimal operating condition, CODCr, TP and SS removal efficiencies reached 75.5％, 76％and 90.5％ respectively, and the CODCr, TP, SS concentrations of effluent meet the National Wastewater Integrated Discharge Standard. The optimum operating conditions according to the local actual situation, running for more than half a year, for the optimization of control parameters for the contrast obtained.

Adsorption of Fluorine from Aqueous Solution by Chitosan Magnetic Microspheres of Loading Lanthanum

2013 ◽  
Vol 634-638 ◽  
pp. 367-374 ◽  
Author(s):  
Jin Song Wang ◽  
Feng Rong Fang ◽  
Heng Yue ◽  
Qing Wei Guo ◽  
Zhen Cheng Xu
Keyword(s):  
Reaction Time ◽  
Removal Rate ◽  
Fluoride Concentration ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Magnetic Microspheres ◽  
Optimum Operating ◽  
Operating Parameters ◽  
Sorption Data ◽  
Effects Of Ph

The adsorption of fluoride by chitosan magnetic microspheres of loading lanthanum metal (CTS-La) was investigated in this study. The chitosan magnetic materials were prepared by organically-linking technique. The effects of pH, the reaction time, the initial concentration, dosage and temperature on the removal rate were studied to determine to the optimum operating parameters. The experimental results show that CTS-La is a black particle shape material with magnetism. The magnetic microspheres have high adsorption ability for fluoride, and the maximum removal of F- was 98.4% under the operating parameters of the initial fluoride concentration 10mg/L, pH=2-3,the reaction time 60minutes, dosage 0.1g, temperature 318K. . The equilibrium sorption data are fitted reasonably well in Langmuir and Freundlich isotherm model, and the correlation coefficients (R2) were Langmuir’s correlation and 0.9997 respectively.

Optimization of Continuously Stirred Tank Bioreactor Design for Cost Minimization: Effect of Microbial Species and Operating Conditions

2008 ◽  
Vol 6 (1) ◽  
Author(s):  
Erin E Powell ◽  
Gordon A Hill
Keyword(s):  
Culture Medium ◽  
Operating Cost ◽  
Oxygen Demand ◽  
Design Strategy ◽  
Aeration Rate ◽  
Operating Conditions ◽  
Stirred Tank ◽  
Optimum Operating ◽  
Stirred Tank Bioreactor ◽  
Microbial Species

The operation of continuously stirred tank bioreactors (CSTBs) at minimum cost is a major concern of operators. In this work, a CSTB design strategy is presented where impeller stirring speed and aeration rate are optimized to meet the oxygen demand of growing cells, simultaneously minimizing the capital and operating cost. The operating cost is limited to the cost of utilities. The optimization scheme assumes a given fermentor tank size, and that the properties of the culture medium and the oxygen respiratory requirements of the microorganisms being cultivated are known. It is possible to choose between two different turbine impellers during the design process. The equations, constraints, and the CSTB design strategy employed by the program are described. The effect of microbial species, ions in the culture medium, impeller style, as well as changing CSTB size and biomass input density on the optimum operating conditions, is examined. The mass transfer coefficient, gas holdup, mixing speed, and aeration rate are all reported at optimized cost conditions. A study of the effects of various parameters on the CSTB design are shown.

scholarly journals Treatment of textile wastewater using a novel electrocoagulation reactor design

2018 ◽  
Vol 20 (3) ◽  
pp. 449-457
Keyword(s):  
Wastewater Treatment ◽  
Rotation Speed ◽  
Removal Rate ◽  
Operating Time ◽  
Oxygen Demand ◽  
Textile Wastewater ◽  
Total Suspended Solid ◽  
Operating Conditions ◽  
Conventional Model ◽  
Textile Wastewater Treatment

<p>This study explored the best-operating conditions for a novel electrocoagulation (EC) reactor with the rotating anode for textile wastewater treatment. The influence of operating parameters like inter-electrode distance (IED), current density (CD), temperature, pH, operating time (RT), and rotation speed on the removal efficiency of the contaminant was studied. A comparative study was done using conventional model with static electrodes in two phases under same textile wastewater The findings revealed that the optimal conditions for textile wastewater treatment were attained at RT = 10 min, CD = 4 mA/cm2, rotation speed = 150 rpm, temperature = 25oC, IED = 1cm, and pH = 4.57. The removal efficiencies of colour, biological oxygen demand (BOD), turbidity, chemical oxygen demand (COD), and total suspended solid (TSS) were 98.50%, 95.55%, 96%, 98% and 97.10% within the first 10 min of the reaction. The results of the experiment reveal that the newly designed reactor incorporated with cathode rings and rotated anode impellers provide a superior treatment efficiency within a short reaction time. The novel EC reactor with a rotating anode significantly enhanced textile wastewater treatment compared to the conventional model. The values of adsorption and passivation resistance validated the pollutants removal rate.</p>

scholarly journals Kinetic Modelling and Determination of Octyl Phenol Ethoxylate (OPE) and Bisphenol A (BPA) (used as plastic additives) Inhibition Constants for Nitrogen Conversion

2021 ◽  
Keyword(s):  
Kinetic Model ◽  
Bisphenol A ◽  
Nitrogen Removal ◽  
Removal Rate ◽  
Kinetic Modelling ◽  
Ammonium Nitrogen ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Octyl Phenol ◽  
Inhibition Constants

<p>Conversion of ammonia to nitrate is sensitive to a number of inhibitors. There is limited information on the nitrification inhibition coefficient and kinetic model in the current literature. Octyl Phenol Ethoxylate (OPE) and Bisphenol A (BPA) inhibition constants were found in nitrogen removal using an activated sludge system. Firstly, OPE and BPA free wastewater was used to determine the optimum operating conditions. The effect of OPE and BPA concentration on system performance was investigated. The ammonium removal rate was less affected by lower OPE and BPA concentrations. When the BPA and OPE concentrations were increased from 0 mg/L to 30 mg/L, the outlet ammonium nitrogen concentrations were increased respectively from 2.8 mg/L to 49.8 mg/L and from 2.6 mg/L to 20.40 mg/L. Due to the inhibition created by these compounds on Nitrobacter, nitrite nitrogen increased in the medium. As the OPE and BPA concentrations increased, the conversion rate of the ammonium nitrogen into nitrate decreased. Based on the experimental results, a kinetic model was developed, and the OPE and BPA inhibition constants (KOPE and KBPA) were found to be 40.7 mg/L and 11.76 mg/L, respectively. In nitrogen removal, BPA created a higher inhibition effect in comparison to OPE.</p>

Sign in / Sign up

Export Citation Format

Share Document