Pyridinium-functionalized magnetic mesoporous silica nanoparticles as a reusable adsorbent for phosphate removal from aqueous solution

2016 ◽  
Vol 74 (5) ◽  
pp. 1127-1135 ◽  
Author(s):  
Fang Ma ◽  
Hongtao Du ◽  
Ronghua Li ◽  
Zengqiang Zhang
Keyword(s):  
Aqueous Solution ◽  
Silica Nanoparticles ◽  
Adsorption Capacity ◽  
Mesoporous Silica Nanoparticles ◽  
Phosphate Removal ◽  
Maximum Adsorption Capacity ◽  
Intra Particle Diffusion ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Magnetic Mesoporous Silica

In this work, pyridinium-functionalized silica nanoparticles adsorbent (PC/SiO2/Fe3O4) was synthesized for phosphate removal from aqueous solutions. The removal efficiency of phosphate on the PC/SiO2/Fe3O4 was carried out and investigated under various conditions such as pH, contact temperature and initial concentration. The results showed that the adsorption equilibrium could be reached within 10 min, which fitted a Langmuir isotherm model, with maximum adsorption capacity of 94.16 mg/g, and the kinetic data were fitted well by pseudo-second-order and intra-particle diffusion models. Phosphate loaded on the adsorbents could be easily desorbed with 0.2 mol/L of NaOH, and the adsorbents showed good reusability. The adsorption capacity was still around 50 mg/g after 10 times of reuse. All the results demonstrated that this pyridinium-functionalized mesoporous material could be used for the phosphate removal from aqueous solution and it was easy to collect due to its magnetic properties.

Adsorption of methyl orange dye onto biochar adsorbent prepared from chicken manure

2018 ◽  
Vol 77 (5) ◽  
pp. 1303-1312 ◽  
Author(s):  
Jiangang Yu ◽  
Xingwen Zhang ◽  
Dong Wang ◽  
Ping Li
Keyword(s):  
Aqueous Solution ◽  
Methyl Orange ◽  
Chicken Manure ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Intra Particle Diffusion ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract In this work, the biochar adsorbent carboxymethyl cellulose (CMC), was prepared from the pyrolysis (600 °C, 120 min) of chicken manure for the removal of methyl orange (MO) from aqueous solution, and its physicochemical properties were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectra (FTIR). The experimental parameters including agitation speed, initial solution pH, biochar dosage and contact time on the adsorption properties of MO from aqueous solution onto CMC were investigated in batch experiments. The kinetic adsorption of different initial concentration could be accurately described by the pseudo-second-order model and the overall rate process was apparently influenced by external mass transfer and intra-particle diffusion. Furthermore, the Langmuir isotherm model showed a better fit with equilibrium data (R2 > 0.99), with the maximum adsorption capacity of 39.47 mg·g−1 at 25 °C. Moreover, the thermodynamic parameters indicated that the adsorption of MO onto CMC was a spontaneous and endothermic process. The results of this study indicated that CMC could be used as a promising biomass adsorbent material for aqueous solutions containing MO.

scholarly journals Effect of Modified Eggshell on Adsorption Capacity of Chromium(VI) from Aqueous Solution

2020 ◽  
Vol 32 (7) ◽  
pp. 1549-1556
Author(s):  
Abdulaziz Ali Alomari
Keyword(s):  
Aqueous Solution ◽  
Thermal Treatment ◽  
Adsorption Capacity ◽  
Rhombohedral Structure ◽  
Chromium Vi ◽  
Protein Fibers ◽  
Residual Protein ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Static Conditions

The aim of this work is to investigate the use of eggshell for adsorption of Cr(VI) from aqueous solution and the effect of thermal treatment as well as coating with Fe2O3 of eggshell on the extraction percent of Cr(VI). The XRD, FTIR and SEM techniques proved that the eggshell mainly composed of calcite rhombohedral structure in addition to a trace of quartz silica residual protein fibers. Heating at 550 ºC does not decompose eggshell but decomposes the residual protein. The effect of pH, weight of eggshell adsorbent, contact time, and initial concentration of Cr(VI) ions on the adsorption of Cr(VI) on eggshell sorbents were determined under static conditions by the batch equilibrium technique. The sorption kinetic as well as mechanistic isotherm parameters of Cr(VI) on the eggshell sorbent, were analyzed. It was concluded that the adsorption of Cr(VI) on eggshell increases as pH increases in the range 3-7, then, with decreases at higher pH. The extraction percent of Cr(VI) increases with an increase in the dosage of eggshell sorbents. The optimum dosage of eggshell adsorbents was found to be 5 g after which the extraction percent of Cr(VI) did not marked increase. The extraction percent of Cr(VI) by eggshell sorbents rapidly increases within 60 min followed by a slower extraction after that when maximum adsorption was reported. The adsorption capacity of Cr(VI) ions is slightly reduced in case of heated eggshell due to the change that occurs in the pore size distribution and structure of eggshell during heating. Hence, the thermal treatment and coating with Fe2O3 do not affect the chemical structure of eggshell sorbents. The adsorption kinetics data were best fitted with the pseudo-second-order equation and the adsorption isotherms were best fitted with the Langmuir isotherm model.

Fast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac Glucomannan

2009 ◽  
Vol 610-613 ◽  
pp. 65-68 ◽  
Author(s):  
Xue Gang Luo ◽  
Feng Liu ◽  
Xiao Yan Lin
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficients ◽  
Konjac Glucomannan ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Equilibrium Process ◽  
Fast Removal

Konjac glucomannan (KGM) was converted into water insoluble konjac glucomannan (WIKGM) by treating with NaOH through completely deacetylated reaction. Adsorption study was carried out for the adsorption of Pb2+ from aqueous solution using water insoluble konjac glucomannan. The influences of pH, contact time, temperature and initial Pb2+ concentration on the absorbent were studied. Results of kinetic data showed that the Pb2+ adsorption rate was fast and good correlation coefficients were obtained for the pseudo second-order kinetic model. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacity of 9.18 mg/g on WIKGM at 25°C.

scholarly journals Mechanosynthesis of MFe2O4 (M = Co, Ni, and Zn) Magnetic Nanoparticles for Pb Removal from Aqueous Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
America R. Vazquez-Olmos ◽  
Mohamed Abatal ◽  
Roberto Y. Sato-Berru ◽  
G. K. Pedraza-Basulto ◽  
Valentin Garcia-Vazquez ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Xrd Analysis ◽  
Maximum Adsorption Capacity ◽  
Sorption Behavior ◽  
Order Kinetic ◽  
X Ray ◽  
Isotherm Adsorption ◽  
Crystallite Sizes ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Adsorption of Pb(II) from aqueous solution using MFe2O4 nanoferrites (M = Co, Ni, and Zn) was studied. Nanoferrite samples were prepared via the mechanochemical method and were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), micro-Raman, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of pure single phases of cubic ferrites with average crystallite sizes of 23.8, 19.4, and 19.2 nm for CoFe2O4, NiFe2O4, and ZnFe2O4, respectively. Only NiFe2O4 and ZnFe2O4 samples show superparamagnetic behavior at room temperature, whereas CoFe2O4 is ferromagnetic. Kinetics and isotherm adsorption studies for adsorption of Pb(II) were carried out. A pseudo-second-order kinetic describes the sorption behavior. The experimental data of the isotherms were well fitted to the Langmuir isotherm model. The maximum adsorption capacity of Pb(II) on the nanoferrites was found to be 20.58, 17.76, and 9.34 mg·g−1 for M = Co, Ni, and Zn, respectively.

Study on Adsorption of Cu(II) on Chitosan Nanofiber Membranes

2014 ◽  
Vol 13 (05n06) ◽  
pp. 1460009 ◽  
Author(s):  
Jianhua Cao ◽  
Dongzhou Li ◽  
Weihua Liang ◽  
Dayong Wu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Ph Effect ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Isotherms ◽  
Electrospinning Technique ◽  
Chitosan Nanofiber ◽  
Pseudo Second Order ◽  
Nanofiber Membranes

Chitosan nanofiber membranes by electrospinning technique were used to remove Cu ( II ) from aqueous solution. The adsorption kinetics, equilibrium isotherms, and pH effect were investigated in batch experiments. The Langmuir isotherm and pseudo second-order kinetic models agree well with the experimental data. The chitosan nanofiber membranes are effective for Cu ( II ) adsorption at pH6. Results showed that the maximum adsorption capacity of the chitosan nanofiber membranes with Cu ( II ) is 118.62 mg g-1. The chitosan nanofiber membranes can be used as an effective adsorbent for the removal of Cu ( II ) in aqueous solution due to high adsorption capacity.

scholarly journals Adsorption Of Cd(II) Ions From Aqueous Solution By A Low-Cost Biosorbent Prepared From Ipomea Pes-Caprae Stem

2020 ◽  
Vol 9 (3) ◽  
pp. 197-206
Author(s):  
Thaharah Ramadhani ◽  
Faisal Abdullah ◽  
Indra Indra ◽  
Abrar Muslim ◽  
Suhendrayatna Suhendrayatna ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Optimal Condition ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Low Cost ◽  
Ph Values ◽  
Monolayer Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

The use of a low-cost biosorbent prepared from Ipomoea pes-caprae stem for the adsorption of Cd(II) ions from aqueous solution at different contact times, biosorbent sizes, pH values, and initial Cd(II) ions concentration solution was investigated. The biosorbent was analyzed using Fourier-transform infrared spectroscopy (FT-IR) to find important IR-active functional groups. A scanning electron microscope (SEM) was used to examine the biosorbent morphology. The experimental results showed the highest Cd(II) ions adsorption was 29.513 mg/g  under an optimal condition as initial Cd(II) ions concentration of 662.77 mg/L, 1 g dose, 80-min contact time, pH 5, 75 rpm of stirring speed, 1 atm, and 30 oC. Cd(II) ions' adsorption kinetics obeys the linearized pseudo-second-order kinetics (R2 = 0.996), and the adsorption capacity is based on the optimal condition, and the rate attained was 44.444 mg/g and 0.097 g/mg. Min, respectively. Besides, the adsorption isotherms were very well fitted by the linearized Langmuir isotherm model, and the monolayer adsorption capacity and pore volume determined was 30.121 mg/g and 0.129 L/mg, respectively. These results indicated the chemisorption nature

Adsorption kinetics and thermodynamics of acid Bordeaux B from aqueous solution by graphene oxide/PAMAMs

2015 ◽  
Vol 72 (7) ◽  
pp. 1217-1225 ◽  
Author(s):  
Fan Zhang ◽  
Shengfu He ◽  
Chen Zhang ◽  
Zhiyuan Peng
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Freundlich Model ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Effects Of Media ◽  
Better Than

Graphene oxide/polyamidoamines dendrimers (GO/PAMAMs) composites were synthesized via modifying GO with 2.0 G PAMAM. The adsorption behavior of the GO/PAMAMs for acid Bordeaux B (ABB) was studied and the effects of media pH, adsorption time and initial ABB concentration on adsorption capacity of the adsorbent were investigated. The optimum pH value of the adsorption of ABB onto GO/PAMAMs was 2.5. The maximum adsorption capacity increased from 325.78 to 520.83 mg/g with the increase in temperature from 298 to 328 K. The equilibrium data followed the Langmuir isotherm model better than the Freundlich model. The kinetic study illustrated that the adsorption of ABB onto GO/PAMAMs fit the pseudo-second-order model. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

scholarly journals Equilibrium, Kinetic, and Thermodynamic Studies on the Adsorption of Cadmium from Aqueous Solution by Modified Biomass Ash

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Lei Xu ◽  
Xuebo Zheng ◽  
Hongbiao Cui ◽  
Zhenqiu Zhu ◽  
Jiani Liang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Metal Concentration ◽  
Morphological Properties ◽  
Maximum Adsorption Capacity ◽  
Icp Oes ◽  
Biomass Ash ◽  
Bet Analysis ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies

Natural biomass ash of agricultural residuals was collected from a power plant and modified with hexagonal mesoporous silica and functionalized with 3-aminopropyltriethoxysilane. The physicochemical and morphological properties of the biomass ash were analyzed by ICP-OES, SEM, TEM-EDS, FTIR, and BET analysis. The adsorption behavior of the modified product for Cd2+ in aqueous solution was studied as a function of pH, initial metal concentration, equilibrium time, and temperature. Results showed that the specific surface area of the modified product was 9 times that of the natural biomass ash. The modified biomass ash exhibited high affinity for Cd2+ and its adsorption capacity increased sharply with increasing pH from 4.0 to 6.0. The maximum adsorption capacity was 23.95 mg/g in a pH 5 solution with an initial metal concentration of 50 mg/L and a contact time of 90 min. The adsorption of Cd2+ onto the modified biomass ash was well fitted to the Langmuir model and it followed pseudo-second-order kinetics. Thermodynamic analysis results showed that the adsorption of Cd2+ was spontaneous and endothermic in nature. The results suggest that the modified biomass ash is promising for use as an inexpensive and effective adsorbent for Cd2+ removal from aqueous solution.

scholarly journals Adsorption of Cu(II) by Poly-γ-glutamate/Apatite Nanoparticles

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 962
Author(s):  
Kuo-Yu Chen ◽  
Wei-Yu Zeng
Keyword(s):  
Adsorption Capacity ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
Gravimetric Analysis ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Initial Adsorption ◽  
Adsorption Equilibrium Data

Poly-γ-glutamate/apatite (PGA-AP) nanoparticles were prepared by chemical coprecipitation method in the presence of various concentrations of poly-γ-glutamate (γ-PGA). Powder X-ray diffraction pattern and energy-dispersive spectroscopy revealed that the main crystal phase of PGA-AP was hydroxyapatite. The immobilization of γ-PGA on PGA-AP was confirmed by Fourier transform infrared spectroscopy and the relative amount of γ-PGA incorporation into PGA-AP was determined by thermal gravimetric analysis. Dynamic light scattering measurements indicated that the particle size of PGA-AP nanoparticles increased remarkably with the decrease of γ-PGA content. The adsorption of aqueous Cu(II) onto the PGA-AP nanoparticles was investigated in batch experiments with varying contact time, solution pH and temperature. Results illustrated that the adsorption of Cu(II) was very rapid during the initial adsorption period. The adsorption capacity of PGA-AP nanoparticles for Cu(II) was increased with the increase in the γ-PGA content, solution pH and temperature. At a pH of 6 and 60 °C, a higher equilibrium adsorption capacity of about 74.80 mg/g was obtained. The kinetic studies indicated that Cu(II) adsorption onto PGA-AP nanoparticles obeyed well the pseudo-second order model. The Langmuir isotherm model was fitted well to the adsorption equilibrium data. The results indicated that the adsorption behavior of PGA-AP nanoparticles for Cu(II) was mainly a monolayer chemical adsorption process. The maximum adsorption capacity of PGA-AP nanoparticles was estimated to be 78.99 mg/g.

scholarly journals Hydrazinolyzed cellulose-g-polymethyl acrylate as adsorbent for efficient removal of Cd(II) and Pb(II) ions from aqueous solution

2016 ◽  
Vol 75 (5) ◽  
pp. 1051-1058 ◽  
Author(s):  
Qiujin Jia ◽  
Wanting Zhang ◽  
Dongping Li ◽  
Yulong Liu ◽  
Yuju Che ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Physical Adsorption ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Initial Ph ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption ◽  
Efficient Adsorbent

Hydrazinolyzed cellulose-graft-polymethyl acrylate (Cell-g-PMA-HZ), an efficient adsorbent for removal of Cd(II) and Pb(II) from aqueous solution, has been prepared by ceric salt-initiated graft polymerization of methyl acrylate from microcrystalline cellulose surface and subsequent hydrazinolysis. The influences of initial pH, contact time, and temperature on adsorption capacity of Cell-g-PMA-HZ as well as adsorption equilibrium, kinetic and thermodynamic properties were examined in detail. As for Cd(II) adsorption, kinetic adsorption can be explained by pseudo-second-order, while adsorption isotherm fits well with Langmuir isotherm model, from which maximum equilibrium adsorption capacity can be derived as 235.85 mg g−1 at 28 °C. Further thermodynamic investigation indicated that adsorption of Cd(II) by adsorbent Cell-g-PMA-HZ is endothermic and spontaneous under studied conditions. On the other hand, isotherm of Pb(II) adsorption fits well with Freundlich isotherm model and is more likely to be a physical-adsorption-dominated process. Consecutive adsorption–desorption experiments showed that Cell-g-PMA-HZ is reusable with satisfactory adsorption capacity.

Sign in / Sign up

Export Citation Format

Share Document