Migration and transformation characteristics of DOM in fine sand and marl rock

2016 ◽  
Vol 74 (1) ◽  
pp. 157-164 ◽  
Author(s):  
Xinyi Wang ◽  
Xiaoge Zhen ◽  
Renzheng Li ◽  
Xiaoman Liu ◽  
Tiantian Wang ◽  
...  
Keyword(s):  
Biological Effects ◽  
Dominant Role ◽  
Fine Sand ◽  
Early Experiment ◽  
Medium Term ◽  
Seepage Velocity ◽  
Adsorption Effect ◽  
Main Effect ◽  
Main Effects ◽  
The Impact

This paper mainly studied migration and transformation characteristics of dissolved organic matter (DOM) in underground aquifers. To achieve the research purpose, we carried out the dynamic column experiments of the DOM at different conditions indoors. In the experiment, the water of Wujiang River from Pingdingshan Coal-field is used as water sample, meanwhile, fine sand and marl rock are used as testing rock sample. A comparative study on migration and transformation characteristics of the DOM in different rock samples is done. The results show that, in the fine sand, the main effects are convection and dispersion, while the adsorption and biological effects are very weak. However, in the marl rock, besides existing convection and dispersion, the adsorption and biological effect are quite significant. And in the marl rock, convection and dispersion plays a major role in the early experiment, while adsorption is the main effect in the medium term, then the biodegradation dominates the final stage. With the increasing of temperature and seepage velocity in the fine sand, the impact of the convection effect becomes gradually weak, the dispersion effect gradually enhances, and, however, convection effect is still playing a dominant role. With the temperature rising in the marl rock, the adsorption effect becomes weak, but biodegradation is enhanced. As the seepage velocity increases in the marl rock, the adsorption and biodegradation both decrease.

The impact of applying the Common Customs Tariff on the armenian export of Cut and Polished Gems to Russia

2019 ◽  
pp. 33-41
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan
Keyword(s):  
Manufacturing Sector ◽  
Practical Implication ◽  
Dominant Role ◽  
New Technology ◽  
Manufacturing Companies ◽  
Medium Term ◽  
Diamond Cutting ◽  
Global Trends ◽  
The Common ◽  
The Impact

The presented study discusses the issues of applying the Common Customs Tariff (CCT) rates of the Eurasian Economic Union (EAEU) on rough diamonds and the impact thereof on the exports of stones cut and polished inArmeniaand then exported toRussia.Aim. The study aims to identify the possible strategies Armenian diamond cutting and polishing companies could adopt as a response to the application of the CCT rates on rough diamonds and how it would affect exports to various destinations, namely to Russia.Tasks. The authors analyze the current state of the gems and jewelry sector and substantiate the need to either integrate it into the jewelry manufacturing sector or to apply various strategies to facilitate exports to either Russia or other destinations in the medium term in response to the application of the CCT rates.Methods. This study uses general scientific methods of cognition, including analytical and methodological approaches and elements of forecasting. Possible strategies the Armenian diamond cutting and polishing companies could adopt in the medium term in response to the application of the EAEU CCT rates are determined using the analytical research method, forecasts in the context of the developments in the Armenian gem processing and jewelry market and global trends, statistical data on the imports and exports of cut and polished gems and jewelry for 2014–2018 published by the UN Comtrade Statistics.Results. Statistics on the exports of processed diamonds from 2014 to 2018 highlights the issue associated with the loss of competitiveness suffered by Armenian companies (mainly in comparison with Indian diamond cutters). The major global trends in the diamond cutting and polishing business indicate that it could be virtually impossible for Armenian cutters and polishers to compete with Indian companies in the medium term if they do not comes to investing in new technology to achieve operational efficiency. For these companies, it is important not to lose the Russian market due to an increase in the tariff rate and concentrate on the processing of gems that are larger than 1 carat. Another strategy to avoid an increase in the customs tariff rates would depend on the Armenian government’s ability to negotiate with Russia in respect of direct imports of diamond stones from Russian manufactures. Two other options for Armenian cutters involve focusing on cutting and polishing of rubies, sapphires, emeralds, etc. or integrating into the jewelry sector either by being the primary supplier or by considering this business as a channel to sell processed diamond stones by setting up their own jewelry manufacturing companies.Conclusions. With CCT going into effect in January 2021 and India’s dominant role in the diamond cutting and polishing business, Armenia needs to carefully consider all of the strategies the Armenian companies could adopt, as discussed above. As a member state of the EAEU, Armenia freely exports to Russia, however, further exports to Russia would depend on Armenia’s ability to ensure that cost-effective operations are in place, or to concentrate on the processing of precious gems rather than diamonds, or to switch to the manufacturing of jewelry items as a major export item.Practical Implication. The findings of this study could be of interest to the Ministry of Economy of the Republic of Armenia and Business Armenia that could be used in elaborating the strategy for the development of Armenian gems and jewelry sector of the economy.

scholarly journals The impact of Jean-Paul Zahn discoveries on rotation and evolution

2019 ◽  
Vol 82 ◽  
pp. 137-151
Author(s):  
A. Maeder ◽  
G. Meynet
Keyword(s):  
Binary Stars ◽  
Dominant Role ◽  
Close Binaries ◽  
Stellar Rotation ◽  
Jean Paul ◽  
Low Metallicity ◽  
Main Effects ◽  
The Impact ◽  
Rotational Coupling ◽  
Internal Coupling

We first review the main effects of stellar rotation on evolution along the fundamental discoveries by Jean-Paul. Then, we examine some of the consequences of rotation in the evolution of single and binary stars. The proper account of meridional circulation in close binaries tends to increase the synchronization time because meridional currents always counteract the tidal interaction. We consider the case of the very low metallicity Z stars, in particular the CEMP-no stars, where rotational mixing may have played a dominant role in their strange chemical composition. Then, turning to “What are the mysteries?”, we emphasize that all over the evolution and for various masses the present models seem to still have a lack of rotational coupling between cores and envelopes. We suggest that magnetic fields may produce this missing internal coupling.

scholarly journals The impact of brand, sex, moment and distance of estimation on the speed perception of vehicles

2018 ◽  
Vol 30 (4) ◽  
pp. 191-202
Author(s):  
István Kósa ◽  
Zoltán Ambrus ◽  
Csilla Zsigmond ◽  
Blanka Bálint ◽  
Manuela Manon Ionescu
Keyword(s):  
University Students ◽  
Experimental Arrangement ◽  
Vehicle Speed ◽  
School Students ◽  
Main Effect ◽  
Speed Perception ◽  
The Moment ◽  
Main Effects ◽  
The Impact

Our research explores whether stereotypes influence estimations of the speed of a cheap vehicle and an expensive one viewed on film by participants. A second aim was to determine whether stereotyping could arise while completing a questionnaire. DAVIES (2009) demonstrated that no effect attributable to stereotyping could be detected among 18–21 year old participants’ contemporaneous estimates of two vehicle speed (the cheap Volkswagen Polo and the expensive BMW). In Experiment 1 we tested Davies’result among 14–18 year old school students. No interaction was found between any of the factors involved. The analysis also revealed that neither the main effects due to brand, nor the moment of estimation of the speed was significant. Furthermore, the main effect due to participants’ sex was not significant. In Experiment 2 we tested DAVIES’ same results (2009) among university students (N = 351), but with a different experimental arrangement. Participants estimated the speed of cars from two different distances. No interaction was detected between any of the factors – brand, distance, sex – involved. The analysis revealed that neither the main effects of the brand, nor the distance of the vehicle from the camcorder was significant. However, the effect of participants’sex wasfound to be significant: females’ overall speed estimate achieved a higher grade of accuracy.

The Impact of Endorsing the Belief in a Just World on Social Judgments

2013 ◽  
Vol 44 (3) ◽  
pp. 209-218 ◽  
Author(s):  
Benoît Testé ◽  
Samantha Perrin
Keyword(s):  
Social Desirability ◽  
Social Value ◽  
Social Utility ◽  
Western Society ◽  
Social Judgments ◽  
Just World ◽  
The Social ◽  
Main Effect ◽  
The Impact

The present research examines the social value attributed to endorsing the belief in a just world for self (BJW-S) and for others (BJW-O) in a Western society. We conducted four studies in which we asked participants to assess a target who endorsed BJW-S vs. BJW-O either strongly or weakly. Results showed that endorsement of BJW-S was socially valued and had a greater effect on social utility judgments than it did on social desirability judgments. In contrast, the main effect of endorsement of BJW-O was to reduce the target’s social desirability. The results also showed that the effect of BJW-S on social utility is mediated by the target’s perceived individualism, whereas the effect of BJW-S and BJW-O on social desirability is mediated by the target’s perceived collectivism.

Assessing the Impact of the Inlet Total Pressure Distortion on the Turbofan Thrust

2018 ◽  
pp. 19-30
Author(s):  
Yu. A. Ezrokhi ◽  
E. A. Khoreva
Keyword(s):  
Total Pressure ◽  
External Compression ◽  
Average Value ◽  
Inlet Distortion ◽  
Air Inlet ◽  
Engine Thrust ◽  
Relative Value ◽  
Main Effect ◽  
Pressure Recovery Factor ◽  
The Impact

The paper considers techniques to develop a mathematical model using a method of «parallel compressors». The model is intended to estimate the impact of the air inlet distortion on the primary parameters of the aero-engine.  The paper presents rated estimation results in the context of twin spool turbofan design for two typical cruiser modes of flight of the supersonic passenger jet. In estimation the base values σbase and the average values of the inlet ram recovery σave remained invariable. Thus, parametrical calculations were performed for each chosen relative value of the area of low-pressure region.The paper shows that an impact degree of the inlet distortion on the engine thrust for two modes under consideration is essentially different. In other words, if in the subsonic mode the impact assessment can be confined only to taking into account the influence of decreasing average values of the inlet total pressure, the use of such an assumption in the supersonic cruiser mode may result in considerable errors.With invariable values of the pressure recovery factor at the engine intake, which correspond to the speed of flight for a typical air inlet of external compression σbase, and average value σave, a parameter Δσuneven  has the main effect on the engine thrust, and degree of this effect essentially depends on a difference between σave and σbase values.

'Planning Economic Integration7, by L.B.M. Mennes, Rotterdam University Press, 1973.

1973 ◽  
Vol 12 (4) ◽  
pp. 438-439
Author(s):  
G. M. Radhul
Keyword(s):  
Economic Integration ◽  
Point Of View ◽  
Planning Model ◽  
Integration Policy ◽  
Medium Term ◽  
Future Production ◽  
Planning Models ◽  
Partici Pant ◽  
The Impact ◽  
Integration Area

The book under review deals with economic integration among deve¬loping countries from the point of view of planning. The author believes that it is useful to approach economic integration from a planning point of view and to develop planning models for it, because the theory of economic integration relevant for developing countries should be directed towards the impact of integration on future investments and future production. The type of models used in the book are the multisector linear programming models and the method of analysis is essentially a comparison of two situations; one with economic integration and the other without. For each prospective partici¬pant a medium term planning model is drawn up taking account of its economic situation in some base year. The results of these single country planning models are analysed and compared to those of a similar planning model for the integration area as a whole. The consequences of the integration policy are then evaluated.

scholarly journals Effects of kinship correction on inflation of genetic interaction statistics in commonly used mouse populations

2021 ◽  
Author(s):  
Anna L Tyler ◽  
Baha El Kassaby ◽  
Georgi Kolishovski ◽  
Jake Emerson ◽  
Ann E Wells ◽  
...  
Keyword(s):  
Mixed Model ◽  
Linear Mixed Model ◽  
Genetic Interaction ◽  
Recombinant Inbred Lines ◽  
Test Statistics ◽  
Test Statistic ◽  
Kinship Matrix ◽  
Main Effect ◽  
Main Effects ◽  
Interaction Test

Abstract It is well understood that variation in relatedness among individuals, or kinship, can lead to false genetic associations. Multiple methods have been developed to adjust for kinship while maintaining power to detect true associations. However, relatively unstudied, are the effects of kinship on genetic interaction test statistics. Here we performed a survey of kinship effects on studies of six commonly used mouse populations. We measured inflation of main effect test statistics, genetic interaction test statistics, and interaction test statistics reparametrized by the Combined Analysis of Pleiotropy and Epistasis (CAPE). We also performed linear mixed model (LMM) kinship corrections using two types of kinship matrix: an overall kinship matrix calculated from the full set of genotyped markers, and a reduced kinship matrix, which left out markers on the chromosome(s) being tested. We found that test statistic inflation varied across populations and was driven largely by linkage disequilibrium. In contrast, there was no observable inflation in the genetic interaction test statistics. CAPE statistics were inflated at a level in between that of the main effects and the interaction effects. The overall kinship matrix overcorrected the inflation of main effect statistics relative to the reduced kinship matrix. The two types of kinship matrices had similar effects on the interaction statistics and CAPE statistics, although the overall kinship matrix trended toward a more severe correction. In conclusion, we recommend using a LMM kinship correction for both main effects and genetic interactions and further recommend that the kinship matrix be calculated from a reduced set of markers in which the chromosomes being tested are omitted from the calculation. This is particularly important in populations with substantial population structure, such as recombinant inbred lines in which genomic replicates are used.

scholarly journals A Sequential Multiple Assignment Randomized Trial (SMART) study of medication and CBT sequencing in the treatment of pediatric anxiety disorders

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Bradley S. Peterson ◽  
Amy E. West ◽  
John R. Weisz ◽  
Wendy J. Mack ◽  
Michele D. Kipke ◽  
...  
Keyword(s):  
Anxiety Disorder ◽  
Anxiety Disorders ◽  
Randomized Trial ◽  
The Other ◽  
Smart Study ◽  
Main Effect ◽  
Multiple Assignment ◽  
Stage 1 ◽  
Main Effects ◽  
Treatment Sequences

Abstract Background Treatment of a child who has an anxiety disorder usually begins with the question of which treatment to start first, medication or psychotherapy. Both have strong empirical support, but few studies have compared their effectiveness head-to-head, and none has investigated what to do if the treatment tried first isn’t working well—whether to optimize the treatment already begun or to add the other treatment. Methods This is a single-blind Sequential Multiple Assignment Randomized Trial (SMART) of 24 weeks duration with two levels of randomization, one in each of two 12-week stages. In Stage 1, children will be randomized to fluoxetine or Coping Cat Cognitive Behavioral Therapy (CBT). In Stage 2, remitters will continue maintenance-level therapy with the single-modality treatment received in Stage 1. Non-remitters during the first 12 weeks of treatment will be randomized to either [1] optimization of their Stage 1 treatment, or [2] optimization of Stage 1 treatment and addition of the other intervention. After the 24-week trial, we will follow participants during open, naturalistic treatment to assess the durability of study treatment effects. Patients, 8–17 years of age who are diagnosed with an anxiety disorder, will be recruited and treated within 9 large clinical sites throughout greater Los Angeles. They will be predominantly underserved, ethnic minorities. The primary outcome measure will be the self-report score on the 41-item youth SCARED (Screen for Child Anxiety Related Disorders). An intent-to-treat analysis will compare youth randomized to fluoxetine first versus those randomized to CBT first (“Main Effect 1”). Then, among Stage 1 non-remitters, we will compare non-remitters randomized to optimization of their Stage 1 monotherapy versus non-remitters randomized to combination treatment (“Main Effect 2”). The interaction of these main effects will assess whether one of the 4 treatment sequences (CBT➔CBT; CBT➔med; med➔med; med➔CBT) in non-remitters is significantly better or worse than predicted from main effects alone. Discussion Findings from this SMART study will identify treatment sequences that optimize outcomes in ethnically diverse pediatric patients from underserved low- and middle-income households who have anxiety disorders. Trial registration This protocol, version 1.0, was registered in ClinicalTrials.gov on February 17, 2021 with Identifier: NCT04760275.

scholarly journals The Impact of B Corp Certification on Growth

2021 ◽  
Vol 13 (13) ◽  
pp. 7191
Author(s):  
Valerie Paelman ◽  
Philippe Van Cauwenberge ◽  
Heidi Vander Bauwhede
Keyword(s):  
Regression Analysis ◽  
Propensity Score ◽  
Panel Regression ◽  
Medium Term ◽  
Difference In Differences ◽  
Dual Purpose ◽  
Full Effect ◽  
The Impact ◽  
Positive Effect ◽  
Over Time

We empirically test whether B Corp certification affects the short- and medium-term growth rates of sustainable enterprises. These businesses are growing in popularity and prevalence but, due to their hybrid nature, often suffer from external credibility issues and competing internal logics. Because of the rigorous and time-involving audit procedure, B Corp certification potentially sends a credible signal about the sustainable nature of the enterprise to its stakeholders. In addition, the B Corp label could help to straighten out internal tensions and align the company towards its dual purpose. Hence, B Corp certification could contribute to company success. We observe 129 firms that were certified between 2013 and 2018 over a period between six years prior and five years post-certification. Using propensity score matching, we identify 129 non-certified matching companies. On this sample, we conduct a difference-in-differences panel regression analysis to investigate the effect of certification. Our dataset allows us to study how the effects of B Corp certification evolve over time, which was previously untested. Our study documents a positive effect of B Corp certification on turnover growth and also that this effect increases with the time since certification, implying that certification requires some time for its full effect to become apparent.

scholarly journals Impact of the COVID-19 Pandemic on the Romanian Labor Market

2020 ◽  
Vol 13 (1) ◽  
pp. 271
Author(s):  
Carmen Valentina Radulescu ◽  
Georgiana-Raluca Ladaru ◽  
Sorin Burlacu ◽  
Florentina Constantin ◽  
Corina Ioanăș ◽  
...  
Keyword(s):  
Labor Market ◽  
Health Insurance ◽  
Labor Force ◽  
Semantic Differential ◽  
Current Crisis ◽  
Health Crisis ◽  
Unemployed People ◽  
Lack Of Information ◽  
Main Effects ◽  
The Impact

The present research aims to establish the impact that the current crisis situation the planet is facing, namely the COVID-19 pandemic, has had so far on the Romanian labor force market. In this context, given the lack of information and information regarding this pandemic and its effects, the administration of a questionnaire among the population was considered to identify the research results. The method of semantic differential and the method of ordering the ranks were used for the interpretation of the results. With the help of this questionnaire, it will be possible to answer the question of the research in this study: What are the main effects of the COVID-19 pandemic on the Romanian labor market? The main results showed that the COVID-19 pandemic affected the Romanian workforce; the respondents of the applied questionnaire claimed that they obtained better results and maintained a similar income, but the health crisis also influenced the mentality of employees, with respondents stating that in the event of changing jobs, they would consider it very important for the new employer to ensure the conditions for preventing and combating COVID-19, as well as complex health insurance. However, analyzing at the macroeconomic level, it was found that the COVID-19 pandemic induced an increase in the number of unemployed people in the Romanian labor market.

Sign in / Sign up

Export Citation Format

Share Document