Hard coal as a potential low-cost adsorbent for removal of 4-chlorophenol from water

2016 ◽  
Vol 73 (8) ◽  
pp. 2025-2030 ◽  
Author(s):  
Krzysztof Kuśmierek ◽  
Katarzyna Zarębska ◽  
Andrzej Świątkowski
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Kinetic Studies ◽  
Hard Coal ◽  
Order Kinetic ◽  
Experimental Parameters ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Related Compounds ◽  
Potential Use

The potential use of raw hard coals as low-cost adsorbents for the removal of 4-chlorophenol (4-CP) from aqueous solutions was examined. The effect of experimental parameters such as the pH and salt presence was evaluated. The kinetic studies showed the equilibrium time was found to be 2 h for all of the adsorbents and that the adsorption process followed the pseudo-second order kinetic model. The adsorption isotherms of the 4-CP on the hard coals were fitted to the Langmuir, Freundlich, Langmuir–Freundlich, Sips and Redlich–Peterson equations. Based on the results obtained, hard coals appear to be a promising adsorbent for the removal of some hazardous water pollutants, like 4-CP and related compounds.

scholarly journals The investigation into the adsorption removal of ammonium by natural and modified zeolites: kinetics, isotherms, and thermodynamics

Water SA ◽  
2019 ◽  
Vol 45 (4 October) ◽  
Author(s):  
Min Pan ◽  
Mingchuan Zhang ◽  
Xuehua Zou ◽  
Xuetong Zhao ◽  
Tianran Deng ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Process ◽  
Low Cost ◽  
Kinetic Studies ◽  
Order Kinetic ◽  
Regeneration Rate ◽  
Ammonium Removal ◽  
Ammonium Adsorption ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objectives of this study were to modify Chinese natural zeolite by NaCl and to investigate its suitability as a low-cost clay adsorbent to remove ammonium from aqueous solution. The effect of Ph on ammonium removal was investigated by batch experiments. The findings indicated that Ph has a significant effect on the removal of ammonium by M-Zeo and maximum adsorption occurred at Ph 8. Ion exchange dominated the ammonium adsorption process at neutral Ph, with the order of exchange selectivity being Na+ > Ca2+ > K+ > Mg2+. The Freundlich model provided a better description of the adsorption process than the Langmuir model. The maximum ammonium adsorption capacity was 17.83 mg/g for M-Zeo at 293K. Considering the adsorption isotherms and thermodynamic studies, the adsorption of ammonium by M-Zeo was endothermic and spontaneous chemisorption. Kinetic studies indicated that the adsorption of ammonium onto M-Zeo is well fitted by the pseudo-second-order kinetic model. Ea in the Arrhenius equation suggested the adsorption of ammonium on M-Zeo was a fast and diffusion-controlled process. The regeneration rate was 90.61% after 5 cycles. The removal of ammonium from real wastewater was carried out, and the removal efficiency was up to 99.13%. Thus, due to its cost-effectiveness and high adsorption capacity, M-Zeo has potential for use in ammonium removal from aqueous solutions.

scholarly journals Kinetic and Thermodynamic Study of Phenol Removal from Water Using Activated Carbon Synthesizes from Avocado Kernel Seed

2016 ◽  
Vol 54 ◽  
pp. 42-57 ◽  
Author(s):  
Kassahun Dejene ◽  
Khalid Siraj ◽  
Shimeles Addisu Kitte
Keyword(s):  
Activated Carbon ◽  
Adsorption Process ◽  
Kinetic Studies ◽  
Persea Americana ◽  
Phenol Removal ◽  
Order Kinetic ◽  
Solution Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Study

This study was aimed for removal of phenol from water using activated carbon synthesize from avocado kernel seeds by adsorption onto it. For adsorption process cleaned and washed avocado kernel seeds (Persea americana) were dried at 100°C in an oven overnight and carbonization was carried out by increasing the furnace temperature at a rate of 5 °C/min to a final temperature of 800 °C for 160 minutes. Then, the activated carbon was powdered and sieved, washed with distilled water until the solution pH reached 7.0. Optimization of activated carbon was performed through effects of solution pH, contact time; initial phenol concentration and temperature of the adsorption. The kinetic studies of the adsorption process were achieved by verifying various models and the data obtained was best fitted to pseudo-second-order kinetic model. The isotherms models were analyzed with Langmuir, Freundlich and Temkin to validate the adsorption process. It was found that Langmuir model was best fitted to the obtained result for both adsorbents.

Equilibrium and Kinetic Studies of Copper Metal Ion Biosorption by Flavobacterium sp. as a Low-Cost Natural Biosorbent

2011 ◽  
Vol 322 ◽  
pp. 436-439 ◽  
Author(s):  
Xi Chan Zhang ◽  
Xing Guang Li
Keyword(s):  
Metal Ion ◽  
Binding Capacity ◽  
Low Cost ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Present study deals with the evaluation of biosorptive removal of copper byFlavobacterium sp.Experiments have been carried out to find the effect of various parameters such as initial pH, contact time and initial metal ion concentration. Adsorption equilibrium studies showed that Cu(II) adsorption data followed the Langmuir model, the maximum binding capacity ofwas 55.20 mg/g at pH 6.0. Kinetics of copper biosorption by Flavobacterium sp. biomass is better described by pseudo second order kinetic model. It was also clearly observed that The present study indicated thatFlavobacterium sp.biomass may be used as a cost and effective biosorbent for the removal of Cu(II) ions from wastewater.

Biosorption of strontium ions from aqueous solution using modified eggshell materials

2017 ◽  
Vol 105 (12) ◽  
Author(s):  
Sayed S. Metwally ◽  
Hoda E. Rizk ◽  
Mona S. Gasser
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Sorption Process ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Biomass Materials ◽  
Strontium Ions

AbstractGreen composites emphasize renewable starting materials for better economy using biomass materials. Therefore, low-cost composite biosorbent was prepared by modification of eggshell material using heteropoly acid for removal of strontium ions from aqueous solution. The resulted composite was characterized and evaluated for the sorption process using the batch technique. Low concentration of strontium ions was used to evaluate the sorption sensitivity of the prepared composite. The obtained experimental results illustrated that the modification process of eggshell material enhanced the percent uptake from 49.9 to 95.7%. From kinetic studies, the sorption of strontium ions follows the pseudo-second-order kinetic model. The isotherm studies indicated that Langmuir is more applicable than Freundlich isotherm. Moreover, Dubinin–Radushkevich isotherm was studied. Thermodynamic studies revealed that the sorption process is spontaneous and has endothermic nature. Strontium ions can be desorbed from the modified eggshell using HNO

scholarly journals Batch Adsorption of Safranin Dye from an Aqueous Solution of Balanites aegyptiaca Seed Coats

2020 ◽  
pp. 48-54
Author(s):  
Buhari Magaji ◽  
Aisha U. Maigari ◽  
Usman A. Abubakar ◽  
Mukhtar M. Sani ◽  
Amina U. Maigari
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficient ◽  
Low Cost ◽  
Kinetic Studies ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Seed Coats

This study was aimed at using Balanite aegyptiaca seed coats activated carbon (BAAC) as a potential adsorbent to remove safranin dye from aqueous solution. BAAC was prepared from Balanite aegyptiaca seed coats using a one-step procedure with 67.27% yield, 3.23% ash content, 695 m2/g surface area and 203 mg/g iodine number. The FTIR spectroscopy revealed O-H, N-H, C-H, C=C, C-O-H stretching vibrations. The influences of agitation time, initial dye concentration and adsorbent dose were studied in batch experiments at room temperature. The adsorptions were rapid at the first 15 minutes of agitation, with the uptake of 2.746 mg/kg. The adsorption equilibrium was achieved at 90 minutes of agitation. Kinetic studies showed good correlation coefficient for both pseudo-first order and pseudo-second-order kinetics model but fitted well into pseudo-second order kinetic model. The adsorption data fitted well into Langmuir isotherm with correlation coefficient (R2) very close to unity and Langmuir maximum adsorption constant, qm  1.00. Thus, the fitting into Langmuir indicates monolayer coverage on the adsorbents. The results showed that BAAC has the potential to be applied as alternative low-cost adsorbents in the remediation of dye contamination in wastewater.

scholarly journals Modified Cenospheres as an Adsorbent for the Removal of Disperse Dyes

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Markandeya Tiwari ◽  
S. P. Shukla ◽  
D. Mohan ◽  
D. S. Bhargava ◽  
G. C. Kisku
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Agitation Speed ◽  
Disperse Dyes ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbate Concentration ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorbent Dose

The main objective of this investigation was to use modified cenospheres for the removal of disperse blue 79:1 (DB) and disperse orange 25 (DO) dyes from aqueous solution by batch adsorption process under different conditions (pH, adsorbent dose, adsorbate concentration, agitation speed, contact time, and temperature). Modified cenosphere was capable of removing up to 78% of DB and 81% of DO dyes from aqueous solutions of 40 mg/L dyes concentration. The investigated data was explained by the Langmuir isotherm. The experimental data were found to follow the pseudo-second-order kinetic model. The results of this study suggested that modified cenospheres could be used as a low-cost alternative to expensive adsorbents like activated carbon in wastewater treatment for the removal of disperse dyes.

scholarly journals 8-Hydroxyqunoline adsorption from aqueous solution using powdered orange peel: kinetic and isotherm study

2015 ◽  
Vol 7 (1) ◽  
pp. 36-46
Author(s):  
Khalid Siraj ◽  
Dema Deso ◽  
Demelash Jado ◽  
Girma Selale
Keyword(s):  
Adsorption Process ◽  
Orange Peel ◽  
Kinetic Studies ◽  
Second Order ◽  
Order Kinetic ◽  
Isotherm Study ◽  
Monolayer Adsorption ◽  
Freundlich Adsorption Isotherm ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract Adsorption of 8-hydroxyquinoline (8HQ) on powdered orange peel (POP), a locally available adsorbent, has been studied. Experiment was performed on different 8HQ concentration, particle size, and adsorbent dosage. The Langmuir and Freundlich adsorption isotherm model has been tested. The obtained results best fitted the Langmuir model, suggesting monolayer adsorption of 8HQ on POP. The kinetic studies for the adsorption process were also carried out using pseudo-first- and pseudo-second-order models, and the data obtained is best fitted to the pseudo-second-order kinetic model. Thermodynamic parameters were calculated for the adsorption process and the result showed that the values of ΔGads, ΔHads, and ΔSads are −1171.4J/mol, −140J/mol and −40.5 J/K at 303 K. Thus, it can be summarized that the adsorption of 8HQ is spontaneous, chemisorbed, monolayer, and exothermic

Surface interaction of sweet potato peels (Ipomoea batata) with Cd(II) and Pb(II) ions in aqueous medium

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Aqueous Medium ◽  
Sweet Potato ◽  
Adsorption Process ◽  
Low Cost ◽  
Correlation Coefficients ◽  
Order Kinetic ◽  
Thermodynamic Evaluation ◽  
Dissociative Mechanism ◽  
Pseudo Second Order ◽  
Potato Peels

The removal of Cd(II) and Pb(II) ions from aqueous medium was studied using potato peels biomass. The adsorption process was evaluated using Atomic Absorption Spectrophotometer (AAS). The Vibrational band of the potato peels was studied using Fourier Transform Infrared Spectroscopy (FTIR). The adsorption process was carried out with respect to concentration, time, pH, particle size and the thermodynamic evaluation of the process was carried at temperatures of 30, 40, 50 and 60(0C), respectively. The FTIR studies revealed that the potato peels was composed of –OH, -NH, –C=N, –C=C and –C-O-C functional groups. The optimum removal was obtained at pH 8 and contact time of 20 min. The adsorption process followed Freundlich adsorption and pseudo second-order kinetic models with correlation coefficients (R2) greater than 0.900. The equilibrium adsorption capacity showed that Pb(II) ion was more adsorbed on the surface of the potato peels biomass versus Cd (II) ion (200.91 mg/g > 125.00 mg/g). The thermodynamic studies indicated endothermic, dissociative mechanism and spontaneous adsorption process. This study shows that sweet potato peels is useful as a low-cost adsorbent for the removal of Cd(II) and Pb(II) ions from aqueous medium.

Studies of Chromium Removal from Tannery Effluents by Dead Streptomyces Rimosus

2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Mohamed Nasser Sahmoune ◽  
Krim Louhab ◽  
Aissa Boukhiar
Keyword(s):  
Fractional Power ◽  
Kinetic Studies ◽  
Second Order ◽  
Order Kinetic ◽  
Streptomyces Rimosus ◽  
Tannery Effluents ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range

Dead streptomyces rimosus was found to be an effective biosorbent for the removal of chromium from industrial tanning effluents. A sorption level of 65 mg/g was observed at pH 4.8 while the precipitation effect augmented this value at a higher pH range. Chromium desorption increased with decreasing desorption agents pH (including HCl and H2SO4) to a maximum value of 95% at approximately zero pH. The biosorption data of trivalent chromium by streptomyces rimosus has been used for kinetic studies based on fractional power, Elovich, pseudo-first order and pseudo-second order rate expressions. The time-dependent Cr (III) biosorption data were well-described by a pseudo-second-order kinetic model. The intraparticle diffusion is not the rate-limiting step for the whole reaction. It was found that the biosorption equilibrium data fit well with the Langmuir model.

Effects of tall fescue biochar on the adsorption behavior of desethyl-atrazine in different types of soil

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3575-3595
Author(s):  
Wanting Li ◽  
Ruifeng Shan ◽  
Yuna Fan ◽  
Xiaoyin Sun
Keyword(s):  
Tall Fescue ◽  
Adsorption Process ◽  
Exothermic Reaction ◽  
Equilibrium Concentration ◽  
Black Soil ◽  
Adsorption Behavior ◽  
Order Kinetic ◽  
Isothermal Adsorption ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Desethyl-atrazine (DEA) is a metabolite of atrazine that exerts a considerable influence on the environment. In this study, tall fescue biochar was prepared by pyrolysis at 500 °C, and batch experiments were conducted to explore its effect on the adsorption behavior of DEA in red soil, brown soil, and black soil. The addition of biochar increased the equilibrium amount of DEA adsorption for the three soil types. A pseudo-second-order kinetic model most closely fit the DEA adsorption kinetics of the three soils with and without biochar, with a determination coefficient (R2) of 0.962 to 0.999. The isothermal DEA adsorption process of soils with and without biochar was optimally described by the Freundlich and Langmuir isothermal adsorption models with R2 values of 0.98 and above. The DEA adsorption process in the pristine soil involved an exothermic reaction, which became an endothermic reaction after the addition of biochar. Partitioning was dominant throughout the entire DEA adsorption process of the three pristine soils. Conversely, in soils with biochar, surface adsorption represented a greater contribution toward DEA adsorption under conditions of low equilibrium concentration. The overall results revealed that the tall fescue biochar was an effective adsorbent for DEA polluted soil.

Sign in / Sign up

Export Citation Format

Share Document