Characterizing o- and p-nitrophenols adsorption onto innovative activated carbon prepared from date pits

2013 ◽  
Vol 69 (1) ◽  
pp. 31-37 ◽  
Author(s):  
Hossam Altaher ◽  
Andrea M. Dietrich
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Waste Product ◽  
Considerable Effect ◽  
Surface Functional Groups ◽  
Order Model ◽  
Pseudo Second Order ◽  
And Performance ◽  
Date Pits

The production and performance of activated carbon prepared from date pits was investigated. Date pits are an abundant local waste product in many countries; converting them to a commercial product would increase the sustainability of this fruit crop. The date pit activated carbon was shown to have similar characteristics of pore size and surface functional groups as other commercial carbons. Batch experiments were conducted with o- and p-nitrophenol to evaluate the performance of this carbon. Results were analyzed according to Langmuir, Freundlich, and Dubinin-Radushkevich adsorption isotherms. The adsorption capacity of o-nitrophenol was 142.9 mg/g while that of p-nitrophenol was 108.7 mg/g. The adsorption process was physical in nature. The position of the −NO2 group in the benzene ring has a considerable effect on the adsorption capacity and rate of uptake. The kinetic results showed that a pseudo second-order model appropriately describes the experimental data. The analysis of kinetic data revealed that the mechanism of adsorption is complex with both liquid film diffusion and intraparticle diffusion contributing to adsorption of both adsorbates.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

scholarly journals Recovery of phosphate from aqueous solution by magnetically recycled modified polishing powder composites

2019 ◽  
Vol 80 (7) ◽  
pp. 1357-1366
Author(s):  
Jianming Liu ◽  
Runying Bai ◽  
Junfeng Hao ◽  
Bowen Song ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Ligand Exchange ◽  
Adsorption Process ◽  
High Adsorption ◽  
Order Model ◽  
Powder Composites ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ph Level ◽  
Adsorption Desorption

Abstract This study investigated a magnetically recycled modified polishing powder (CMIO@PP) as an adsorbent of phosphate; the CMIO@PP was synthesized by combining the modified La/Ce-containing waste polishing powder with CaO2-modified Fe3O4 (CMIO). Results indicate that the CMIO@PP nanocomposite presents a crystal structure comprising La (OH)3, Ce (OH)3, and Fe3O4, and that CMIO is uniformly dispersed in the modified polishing powder. The CMIO@PP (1:3) is a suitable choice considering its magnetism and adsorption capacity. The magnetic adsorbent exhibits a high adsorption capacity of 53.72 mg/g, a short equilibrium time of 60 min, and superior selectivity for phosphate. Moreover, the adsorbent strongly depends on the pH during the adsorption process and maintains a large adsorption capacity when the pH level is between 2 and 6. The adsorption of phosphate by the CMIO@PP (1:3) accords with the Langmuir isotherm model, and the adsorption process follows the pseudo-second order model. Meanwhile, adsorption–desorption experiments show that the adsorbent could be recycled a few times and that a high removal efficiency of phosphate from civil wastewater was achieved. Finally, mechanisms show that the adsorption of phosphate by the CMIO@PP (1:3) is mainly caused by electrostatic attraction and ligand exchange.

scholarly journals Development of Pectin-Based Aerogels with Several Excellent Properties for the Adsorption of Pb2+

Foods ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 3127
Author(s):  
Risi Wang ◽  
Ya Li ◽  
Xixiang Shuai ◽  
Jun Chen ◽  
Ruihong Liang ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Adsorption Process ◽  
Diglycidyl Ether ◽  
Order Model ◽  
High Mechanical Strength ◽  
Adsorption Data ◽  
Pseudo Second Order ◽  
Large Maximum

Traditional aerogels lack specific functional groups for the adsorption of Pb2+, which results in a low adsorption capacity and limits the application scope. Novel porous pectin-based aerogels (PPEAs) were prepared by incorporating polyethylenimine (PEI) using ethylene glycol diglycidyl ether (EGDE) as a cross-linker for the removal of Pb2+ from water. The cross-linking mechanism, morphology, mechanical strength, thermal stability, adsorption properties, and mechanism of the aerogels were investigated. The aerogels possessed several desirable features, such as a large maximum Pb2+ adsorption capacity (373.7 mg/g, tested at pH 5.0), ultralight (as low as 63.4 mg/cm3), high mechanical strength (stress above 0.24 MPa at 50% strain), and easy recyclability. Meanwhile, the equilibrium adsorption data was well described by the Langmuir–Freundlich (Sips) model and the kinetic adsorption process was well fitted using the pseudo-second-order model. The donor groups, such as -NH2, and oxygen-containing functional groups were responsible for the Pb2+ adsorption, which was confirmed by the FTIR and XPS analysis. The excellent characteristics mean that PPEAs are highly effective adsorbents in the remediation of lead-containing wastewater.

scholarly journals Batch adsorption studies for ketoprofen removal via Dillenia Indica peel activated carbon

2021 ◽  
Vol 920 (1) ◽  
pp. 012010
Author(s):  
F Fadzail ◽  
M Hasan ◽  
Z Mokhtar ◽  
N Ibrahim ◽  
O S An ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Adsorption Process ◽  
Chemical Activation ◽  
Batch Adsorption ◽  
Order Model ◽  
Batch Mode ◽  
Adsorbent Dosage ◽  
Pseudo Second Order ◽  
Dillenia Indica ◽  
Experimental Findings

Abstract Removal of ketoprofen using Dillenia Indica peel activated carbon was investigated using batch adsorption at a laboratory scale. Chemical activation method with the aid of phosphoric acid was utilised in preparing the activated carbon. The adsorption experiments were evaluated using various factors which, are initial concentration, adsorbent dosage, and pH of ketoprofen. The optimum condition was determined to be at pH 6 and adsorbent dosage of 0.4 g with a most KTP uptake of 8.354 mg/g. The experimental findings showed that adsorption is favorable at lower pH. Isotherm studies were conducted and the data indicated that Langmuir isotherm was well fitted to the adsorption process and the pseudo-second-order model was more preferable in simulating the kinetic process. In essence, Dillenia Indica peel activated carbon was proven as being a favourable adsorbent for the uptake of ketoprofen in batch mode.

scholarly journals Corn stalk as starting material to prepare a novel adsorbent via SET-LRP and its adsorption performance for Pb(II) and Cu(II)

2020 ◽  
Vol 7 (3) ◽  
pp. 191811
Author(s):  
Yazhen Wang ◽  
Shuang Li ◽  
Liqun Ma ◽  
Shaobo Dong ◽  
Li Liu
Keyword(s):  
Adsorption Capacity ◽  
Potassium Hydroxide ◽  
Adsorption Process ◽  
Hydroxylamine Hydrochloride ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Corn Stalk ◽  
Order Model ◽  
Adsorption Performance ◽  
Pseudo Second Order

Corn stalk was used as the initial material to prepare a corn stalk matrix-g-polyacrylonitrile-based adsorbent. At first, the corn stalk was treated with potassium hydroxide and nitric acid to obtain the corn stalk-based cellulose (CS), and then the CS was modified by 2-bromoisobutyrylbromide (2-BiBBr) to prepare a macroinitiator. After that, polyacrylonitrile (PAN) was grafted onto the macroinitiator by single-electron transfer living radical polymerization (SET-LRP). A novel adsorbent AO CS-g-PAN was, therefore, obtained by introducing amidoxime groups onto the CS-g-PAN with hydroxylamine hydrochloride (NH 2 OH · HCl). FTIR, SEM and XPS were applied to characterize the structure of AO CS-g-PAN. The adsorbent was then employed to remove Pb(II) and Cu(II), and it exhibited a predominant adsorption performance on Pb(II) and Cu(II). The effect of parameters, such as temperature, adsorption time, pH and the initial concentration of metal ions on adsorption capacity, were examined in detail during its application. Results suggest that the maximum adsorption capacity of Pb(II) and Cu(II) was 231.84 mg g –1 and 94.72 mg g −1 , and the corresponding removal efficiency was 72.03% and 63%, respectively. The pseudo-second order model was more suitable to depict the adsorption process. And the adsorption isotherm of Cu(II) accorded with the Langmuir model, while the Pb(II) conformed better to the Freundlich isotherm model.

Ultrasound and microwave-assisted preparation of Fe-activated carbon as an effective low-cost adsorbent for dyes wastewater treatment

RSC Advances ◽  
2016 ◽  
Vol 6 (82) ◽  
pp. 78936-78946 ◽  
Author(s):  
Song Cheng ◽  
Libo Zhang ◽  
Hongying Xia ◽  
Jinhui Peng ◽  
Jianhua Shu ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Langmuir Isotherm ◽  
Low Cost ◽  
Order Model ◽  
Microwave Assisted ◽  
Pseudo Second Order ◽  
Mb Adsorption

A and B are Langmuir isotherm and pseudo-second-order model. We conclude that MB adsorption capacity of Fe-activated carbon is bigger than raw activated carbon, indicating that Fe-activated carbon has better MB removal efficiency.

scholarly journals Adsorption of Crude Oil Spill from Aqueous Solution using Agro-Wastes as Adsorbents

2021 ◽  
pp. 27-52
Author(s):  
Akinsete O. Oluwatoyin ◽  
Araoye A. Olalekan
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Carbon Adsorbents ◽  
Banana Peel ◽  
Rice Husks ◽  
Order Model ◽  
First Order ◽  
Pseudo Second Order ◽  
Crude Oil Spill

Ever increasing and growing awareness of oil-spillage to water environment has led to the search for cost-effective unconventional remediating techniques. This study was carried out using agro-wastes (Rice Husks, Banana Peels and Groundnut Husks) adsorbents. They were activated with H3PO4 for crude oil spill removal from aqueous solution; results were analysed using atomic absorption spectroscopy. The raw agro-wastes and their activated forms were characterized by SEM. The sorption study for maximum adsorption capacity were carried out at different adsorbent concentrations, adsorbent dosage, contact time, pH and rotational speed. The experimental results were analysed using Langmuir, Freundlich, Temkin, Dubinin-Radushkevich isotherm models. The maximum average adsorption capacity (qe) for raw and activated carbon adsorbents were observed in rice husks with 0.2750 and 0.3698 mg/g respectively. The Langmuir isotherm was found to well represent the measured sorption data for the raw and activated banana peel while the remaining raw and activated adsorbents followed the Temkin isotherm. The batch adsorption data on the effect of contact time were fitted into the pseudo-first-order and pseudo-second order models. The banana peel data and its activated form were best described by the pseudo-second-order model indicating chemisorption process while the remaining adsorbents followed the pseudo-first-order model indicating physisorption process. The average removal efficiency of oil by the various adsorbents used increase in the order: (Raw: Banana Peels (50.4 %) < Groundnut Husks (56.8 %) < Rice Husks (74.4 %); Activated Carbon: Banana Peels (61.4 %) < Groundnut Husks (65.6 %) < Rice Husks (82.8 %)). Results of this study (high values of R2 and least values AARE and RMSE) revealed and confirmed that activated carbon adsorbents have better adsorption capacity than the raw forms to clean-up oil spills in aqueous solution.

Removal of sunset yellow FCF from aqueous solution using polyethyleneimine-modified MWCNTs

2015 ◽  
Vol 73 (6) ◽  
pp. 1269-1278 ◽  
Author(s):  
Hejun Gao ◽  
Luanluan Zhang ◽  
Yunwen Liao
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Adsorption Mechanism ◽  
Adsorption Process ◽  
Langmuir Model ◽  
Order Model ◽  
Sunset Yellow ◽  
Multi Wall Carbon Nanotubes ◽  
Initial Ph ◽  
Pseudo Second Order

A novel adsorbent consisting of polyethyleneimine-modified multi-wall carbon nanotubes (PEI-MWCNTs) was synthesized by grafting PEI on the carboxyl MWCNTs. The surface properties of the PEI-MWCNTs were measured by scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared, and zeta potential. The adsorption behavior of the PEI-MWCNTs was investigated using sunset yellow FCF as adsorbate. The effects of dosage of adsorbent, the initial pH of solution, contact time and temperature on the adsorption capacity were studied. Then, the kinetics and thermodynamics of the adsorption process were further investigated. Experimental results showed that the adsorption kinetics fitted a pseudo-second-order model and the adsorption isotherms agreed well with the Langmuir model. The adsorption process occurred very fast and the adsorption capacity of PEI-MWCNTs was much higher than that of many of the previously reported adsorbents. Additionally, the plausible adsorption mechanism was discussed.

scholarly journals Activated Carbon for Dyes Removal: Modeling and Understanding the Adsorption Process

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Y. El maguana ◽  
N. Elhadiri ◽  
M. Benchanaa ◽  
R. Chikri
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Methyl Orange ◽  
Adsorption Process ◽  
Second Order ◽  
Prickly Pear ◽  
Order Model ◽  
Seed Cake ◽  
Pseudo Second Order ◽  
Dyes Removal

Batch adsorption experiments have been conducted to investigate the removal of methyl orange from aqueous solution by an activated carbon prepared from prickly pear seed cake by phosphoric acid activation. The adsorption process has been described by using kinetic and isotherm models. The kinetic of adsorption was examined by pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. Adsorption isotherm was modeled using Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms. The adsorption process of methyl orange was well explained by the pseudo-second-order model and Freundlich isotherm. Also, pseudo-n-order model has been applied to estimate the order of adsorption kinetic and it was found equal to 2 which confirm the good accuracy of the pseudo-second order. Moreover, Dubinin–Radushkevich isotherm reveals that the adsorption of methyl orange onto activated carbon was a physisorption process in nature. The adsorption capacity of activated carbon was found to be 336.12 mg/g at temperature 20°C and pH∼7. These results demonstrated that the prickly pear seed cake is a suitable precursor for the preparation of appropriate activated carbon for dyes removal from aqueous solution.

scholarly journals RGO/CNF/PANI AS AN EFFECTIVE ADSORBENT FOR THE ADSORPTION OF URANIUM FROM AQUEOUS SOLUTION

2018 ◽  
Vol 56 (1A) ◽  
pp. 25
Author(s):  
Nguyen Quang Dat
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Uranium Concentration ◽  
Maximum Adsorption Capacity ◽  
High Adsorption ◽  
Order Model ◽  
Pani Composite ◽  
Reduced Graphene ◽  
Pseudo Second Order

In this paper, we present a recent study in the adsorption of uranium from an aquatic environment by reduced graphene oxide - Cu0.5Ni0.5Fe2O4 ferrite – polyaniline (RGO/CNF/PANI) composite. Uranium concentration was carried out by batch techniques. The effect of pH, contact time, concentration of equilibrium state and reusability on uranium adsorption capacity have been studied. The adsorption process was accomplished within 240 min and could be well described by the pseudo-second-order model. The adsorption isotherm agrees well with the Langmuir model, having a maximum adsorption capacity of 2000 mg/g, at pH = 5 and 25 oC. The RGO/CNF/PANI materials could be a promising absorbent for removing U (VI) in aqueous solution because of their high adsorption capacity and convenient magnetic separation. 

Sign in / Sign up

Export Citation Format

Share Document