Use of papaya seeds as a biosorbent of methylene blue from aqueous solution

2013 ◽  
Vol 68 (2) ◽  
pp. 441-447 ◽  
Author(s):  
Diego S. Paz ◽  
Alexandre Baiotto ◽  
Marcio Schwaab ◽  
Marcio A. Mazutti ◽  
Mariana M. Bassaco ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Second Order ◽  
Adsorption Kinetic ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Papaya Seeds ◽  
Second Order Model

In this study papaya seeds were used to remove methylene blue dye from aqueous solution. Papaya seeds were characterized as possessing a macro/mesoporous texture and large pore size. Studies were carried out in batches to evaluate the effect of contact time and pH (2–12) on the removal of dye. It was observed that the adsorption of dye was better in the basic region (pH 12). The equilibrium data were analyzed using Langmuir, Freundlich, Dubinin–Raduschkevich, Tempkin, Jovanovich, Redlich–Peterson, Sips, Toth and Radke–Prausnitz isotherms. The equilibrium data were best described by the Langmuir isotherm with a maximum adsorption capacity of 637.29 mg g–1. Adsorption kinetic data were fitted using the pseudo-first-order and pseudo-second-order model. The adsorption kinetic is very fast and was best described by the pseudo-second-order model.

Electrosorption of Methylene Blue from Aqueous Solution on Graphene-Titanium Electrode: Adsorption Kinetics Studies

2018 ◽  
Vol 17 (2) ◽  
Author(s):  
Dan Wu ◽  
Yaxiu Zhao ◽  
Qiang Liu ◽  
Chein-Chi Chang ◽  
Wei Hou
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Kinetics ◽  
Graphene Film ◽  
Titanium Substrate ◽  
Second Order ◽  
Applied Potential ◽  
Order Model ◽  
Pseudo Second Order ◽  
Second Order Model

Abstract A graphene film deposited on titanium substrate was successfully prepared by a facile solution evaporation method, as electrode exhibiting superior electrosorption property toward methylene blue (MB) from aqueous solution. The fabricated graphene film on titanium substrate was characterized in detail by scanning electron microscopy (SEM) and FTIR techniques. As electrode (GTE) for electrosorption of MB, some experimental parameters, such as applied potential, concentration of electrolyte, solution initial pH and temperature, were systematically investigated and discussed. The experimental results demonstrated that the maximum adsorption capacity using GTE can reach 86.06 mg· g−1 under the optimized conditions of −600 mV of applied potential, pH of 7.5, 293 K and 0.01 mg· L−1 Na2SO4 solution, which is 1.40 times of that obtained under open circuit condition in 10 mg· L−1 MB solution. The adsorption isotherm of MB on GTE was analyzed with Langmuir and Freundlich isotherm equations, Pseudo-first-order model, pseudo-second-order model, and intra-particle diffusion model were applied to depict the adsorption kinetics process. The electrosorption of MB preferably fitted Langmuir isotherm, indicating a single-layer adsorption of MB molecules on graphene film followed pseudo-second-order model. Moreover the electrosorption of MB on GTE was found to be spontaneous and endothermic process. This work would be helpful to design and fabricate high performance carbon-based electrodes for high efficiency electrosorption treatment of dye wastewaters.

Removal of Pb (II) from Aqueous Solution by Blast-Furnace Slags

2013 ◽  
Vol 726-731 ◽  
pp. 2736-2741
Author(s):  
Ming Da Liu ◽  
Ge Tian ◽  
Liang Jie Zhao ◽  
Yao Sheng Wang ◽  
Lei Guo ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Blast Furnace ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Sorption Process ◽  
Second Order ◽  
Order Model ◽  
Pseudo Second Order ◽  
Solution Kinetic ◽  
Second Order Model

Five blast-furnace slags were used as adsorbents to remove Pb (II) from aqueous solution. Kinetic studies showed that the sorption process was best described by pseudo-second-order model. Among Langmuir, Freundlich and Temkin isotherms, the Freundlich isotherm had a better fit with the simulation of the adsorption of Pb (II).

scholarly journals FLY ASH MAGNETIC ADSORBENT FOR CADMIUM ION REMOVAL FROM AN AQUEOUS SOLUTION

2021 ◽  
Vol 185 (1) ◽  
pp. 42-50
Author(s):  
Gabriela BUEMA ◽  
Nicoleta LUPU ◽  
Horia CHIRIAC ◽  
Dumitru Daniel HEREA ◽  
Lidia FAVIER ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Fly Ash ◽  
Adsorption Capacity ◽  
Second Order ◽  
Order Model ◽  
Cadmium Ion ◽  
Cadmium Ions ◽  
Ion Removal ◽  
Pseudo Second Order ◽  
Second Order Model

The fly ash generated from a Romanian power plant was used as a starting material in this study. The aim of the study was to obtain a low cost material based on the treatment of fly ash with Fe3O4 for utilization as an adsorbent for cadmium ion removal. The adsorbent that was synthesized was characterized using different techniques. The adsorption process was investigated by the batch technique at room temperature. The quantity of cadmium ion adsorbed was measured spectrophotometrically. The experimental data showed that the material can remove cadmium ions at all three working concentrations. The adsorption capacity increased with an increase in concentration, respectively contact time. The results were analyzed through two kinetic models: pseudo first order and pseudo second order. The kinetics results of cadmium adsorption onto a magnetic material are in good agreement with a pseudo second order model, with a maximum adsorption capacity of 4.03 mg/g, 6.73 mg/g, and 9.65 mg/g. Additionally, the pseudo second order model was linearized into its four types. The results indicated that the material obtained show the ability to remove cadmium ions from an aqueous solution.

scholarly journals Tea Stem as a Sorbent for Removal of Methylene Blue from Aqueous Phase

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Tzan-Chain Lee ◽  
Shumao Wang ◽  
Zonggui Huang ◽  
Zhongxing Mo ◽  
Gangxing Wang ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Ionic Strength ◽  
Aqueous Phase ◽  
Removal Efficiency ◽  
Adsorption Mechanism ◽  
Second Order ◽  
Isotherm Models ◽  
Order Model ◽  
Pseudo Second Order ◽  
Second Order Model

The potentiality of tea stem for the adsorption of methylene blue (MB) from aqueous phase was investigated. A series of operating factors, including the initial MB concentration, contact time, pH of solution, dose of tea stem, and ionic strength of solution, were conducted to understand the effect of adsorption of MB onto tea stem. Adsorption isotherm, kinetic models, thermodynamic investigation, and regenerability of tea stem were systematically investigated in this study. The experiment results revealed that the removal efficiency decreased with MB concentration and the equilibrium time of adsorption at different initial MB concentrations was approximately at 60 min. The appropriate dose of tea stem powder was found to be 4 g/L. The pHzpc of tea stem was evaluated and was observed to be 6.0 ± 0.2. The removal efficiency increased with pH ranging from 3.0 to 5.0 and remained constantly at the pH range of 5.0–11.0. The pH affected the adsorption because of the repellent power between H+ and dye cation. The ionic strength was found to have a negligible effect on the adsorption. The Langmuir and Temkin isotherm models were found to be the best isotherm models to elucidate the adsorption mechanism between MB and tea stem powder. The maximum adsorption capacity of 103.09 mg/g derived from the Langmuir model was much close to the experimental result. From the kinetic analysis, the pseudo-second-order model was found to be the suitable model to describe the adsorption behavior. The calculated adsorption capacities at different temperatures derived from the pseudo-second-order model ranging from 68.91 to 69.8 mg/g were well close to the experimental data. The intraparticle diffusion of MB molecules into pore structures of tea stem powder is the rate-limiting step for the adsorption process in this study. Evaluation of thermodynamic parameters including changes in enthalpy, entropy, and Gibb’s free energy indicated the adsorption mechanism between MB and tea stem powder was a spontaneous and exothermic process. The regeneration/adsorption experiments indicated that the tea stem powder efficiently remained more than 97% after five cycles using NaOH as a desorbing agent and thus be used for many times. On the basis of experimental results obtained, it is concluded that the tea stem has a considerable potential as a low-cost sorbent for removing MB from the aqueous phase.

scholarly journals Adsorption removal of methylene blue from aqueous solution on carbon-coated Fe3O4 microspheres functionalized with chloroacetic acid

2018 ◽  
Vol 25 (2) ◽  
pp. 353-361
Author(s):  
Zefei Zhang ◽  
Cholhwan Kim ◽  
Carlos Fernandez ◽  
Manickam Minakshi Sundaram ◽  
Thippeswamy Ramakrishnappa ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Chloroacetic Acid ◽  
Second Order ◽  
Magnetic Microspheres ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Equilibrium Data ◽  
Carbon Coated ◽  
Pseudo Second Order

AbstractWe report the preparation and employability of carbon-coated Fe3O4(Fe3O4/C) microspheres functionalized with chloroacetic acid (CAA) for the removal of methylene blue (MB) in aqueous solution. The prepared magnetic microspheres (Fe3O4/C-CAA) were characterized by the following techniques: X-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectrometer, vibrating sample magnetometry, and Brunauer-Emmett-Teller. The characterization results showed that Fe3O4/C microspheres were modified by CAA without any phase change. Fe3O4/C-CAA microspheres have higher adsorption capacity for MB compared to Fe3O4/C microspheres. The Langmuir, Freundlich, and Temkin adsorption models were applied to describe the equilibrium isotherms, and the Langmuir adsorption model fitted well with the equilibrium data. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetics data. However, the pseudo-second-order kinetic model fitted better with the adsorption kinetics data.

Adsorption of leather dye onto activated carbon prepared from bottle gourd: equilibrium, kinetic and mechanism studies

2013 ◽  
Vol 67 (1) ◽  
pp. 201-209 ◽  
Author(s):  
Edson Luiz Foletto ◽  
Caroline Trevisan Weber ◽  
Diego Silva Paz ◽  
Marcio Antonio Mazutti ◽  
Lucas Meili ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Intraparticle Diffusion ◽  
Second Order ◽  
Adsorption Kinetic ◽  
Bottle Gourd ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Data

Activated carbon prepared from bottle gourd has been used as adsorbent for removal of leather dye (Direct Black 38) from aqueous solution. The activated carbon obtained showed a mesoporous texture, with surface area of 556.16 m2 g−1, and a surface free of organic functional groups. The initial dye concentration, contact time and pH significantly influenced the adsorption capacity. In the acid region (pH 2.5) the adsorption of dye was more favorable. The adsorption equilibrium was attained after 60 min. Equilibrium data were analyzed by the Langmuir, Freundlich, Dubinin–Radushkevich and Temkin isotherm models. The equilibrium data were best described by the Langmuir isotherm, with maximum adsorption capacity of 94.9 mg g−1. Adsorption kinetic data were fitted using the pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models. The adsorption kinetic was best described by the second-order kinetic equation. The adsorption process was controlled by both external mass transfer and intraparticle diffusion. Activated carbon prepared from bottle gourd was shown to be a promising material for adsorption of Direct Black 38 from aqueous solution.

scholarly journals Kinetic and Thermodynamic Studies on the Phosphate Adsorption Removal by Dolomite Mineral

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Xiaoli Yuan ◽  
Wentang Xia ◽  
Juan An ◽  
Jianguo Yin ◽  
Xuejiao Zhou ◽  
...  
Keyword(s):  
Adsorption Kinetics ◽  
Removal Rate ◽  
Second Order ◽  
Phosphate Removal ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Thermodynamic Studies ◽  
Pseudo Second Order ◽  
Second Order Model

The efficiency of dolomite to remove phosphate from aqueous solutions was investigated. The experimental results showed that the removal of phosphate by dolomite was rapid (the removal rate over 95% in 60 min) when the initial phosphate concentration is at the range of 10–50 mg/L. Several kinetic models including intraparticle diffusion model, pseudo-first-order model, Elovich model, and pseudo-second-order model were employed to evaluate the kinetics data of phosphate adsorption onto dolomite and pseudo-second-order model was recommended to describe the adsorption kinetics characteristics. Further analysis of the adsorption kinetics indicated that the phosphate removal process was mainly controlled by chemical bonding or chemisorption. Moreover, both Freundlich and Langmuir adsorption isotherms were used to evaluate the experimental data. The results indicated that Langmuir isotherm was more suitable to describe the adsorption characteristics of dolomite. Maximum adsorption capacity of phosphate by dolomite was found to be 4.76 mg phosphorous/g dolomite. Thermodynamic studies showed that phosphate adsorption was exothermic. The study implies that dolomite is an excellent low cost material for phosphate removal in wastewater treatment process.

scholarly journals Eco-Friendly Materials Obtained by Fly Ash Sulphuric Activation for Cadmium Ions Removal

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3584
Author(s):  
Gabriela Buema ◽  
Nicoleta Lupu ◽  
Horia Chiriac ◽  
Tiberiu Roman ◽  
Marieta Porcescu ◽  
...  
Keyword(s):  
Fly Ash ◽  
Sulphuric Acid ◽  
Metal Ion ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Acid Activation ◽  
Order Model ◽  
Intraparticle Diffusion Model ◽  
Pseudo Second Order ◽  
Second Order Model

Wastes are the sustainable sources of raw materials for the synthesis of new adsorbent materials. This study has as objectives the advanced capitalization of fly ash, by sulphuric acid activation methods, and testing of synthesized materials for heavy metals removal. Based on the previous studies, the synthesis parameters were 1/3 s/L ratio, 80 °C temperature and 10% diluted sulphuric acid, which permitted the synthesis of an eco-friendly adsorbent. The prepared adsorbent was characterized through SEM, EDX, FTIR, XRD and BET methods. Adsorption studies were carried out for the removal of Cd2+ ions, recognized as ions dangerous for the environment. The effects of adsorbent dose, contact time and metal ion concentrations were studied. The data were tested in terms of Langmuir and Freundlich isotherm and it was found that the Langmuir isotherm fitted the adsorption with a maximum adsorption capacity of 28.09 mg/g. Kinetic data were evaluated with the pseudo-first-order model, the pseudo-second-order model and the intraparticle diffusion model. The kinetics of cadmium adsorption into eco-friendly material was described with the pseudo-second-order model, which indicated the chemisorption mechanism.

scholarly journals Removal of Methylene Blue Dye From Aqueous Solution Using PDADMAC Modified ZSM-5 Zeolite as a Novel Adsorbent 

2021 ◽  
Author(s):  
Sabarish Radoor ◽  
Jasila Karayil ◽  
Aswathy Jayakumar ◽  
Jyotishkumar Parameswaranpillai ◽  
Suchart Siengchin
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Contact Time ◽  
Adsorption Process ◽  
Nitrogen Adsorption ◽  
Second Order ◽  
Blue Dye ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order

Abstract In the present work, we modified ZSM-5 zeolite using a bio polymer poly (diallyl dimethyl ammonium chloride) and employed it for the removal of cationic dye, methylene blue from aqueous solution. The chemical and physical properties of the modified ZSM-5 zeolite were investigated using XRD, FTIR, SEM, TEM, nitrogen adsorption, TGA and 27Al NMR. Modified ZSM-5 zeolite possesses high surface area and pore diameter which was confirmed from SEM, TEM and nitrogen adsorption analysis. Adsorption of methylene blue on zeolite was investigated by batch adsorption technique. The effect of different parameters such as zeolite dosage, initial methylene blue concentration, temperature, pH and contact time on the adsorption process was discussed. Maximum adsorption capacity (4.31 mg/g) was achieved using 0.1g of modified ZSM-5 zeolite at the optimum conditions (initial dye concentration: 10 mg/L, pH: 10, temperature:30oC and contact time: 300 min). The experimental data were fitted into Langmuir and Freundlich models and the results indicate that the adsorption process followed Freundlich isotherm. Kinetic data were investigated using pseudo-first-order and pseudo-second-order models. Kinetic analysis indicates that pseudo-second-order model is more suitable to describe adsorption of MB on modified ZSM-5 zeolite. The reusability test suggests that the adsorbent could be reused at least six times without significant loss in removal efficiency.

Sign in / Sign up

Export Citation Format

Share Document