Inhibition effect of swine wastewater heavy metals and antibiotics on anammox activity

2012 ◽  
Vol 66 (7) ◽  
pp. 1519-1526 ◽  
Author(s):  
T. Lotti ◽  
M. Cordola ◽  
R. Kleerebezem ◽  
S. Caffaz ◽  
C. Lubello ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Prolonged Exposure ◽  
Liquid Fraction ◽  
Swine Manure ◽  
Swine Wastewater ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Batch Tests ◽  
Anammox Activity ◽  
Anammox Process

The feasibility of anaerobic ammonium oxidation (anammox) process to treat wastewaters containing antibiotics and heavy metals (such as the liquid fraction of the anaerobically digested swine manure) was studied in this work. The specific anammox activity (SAA) was evaluated by means of manometric batch tests. The effects of oxytetracycline, sulfathiazole, copper and zinc were studied. The experimental data of the short-term assays were fitted with an inhibition model to identify the half maximal inhibitory concentration (IC50). After 24 h exposures, IC50-values equal to 1.9, 3.9, 650 and 1,100 mg L−1 were identified for copper, zinc, sulfathiazole and tetracycline respectively. The effect of prolonged exposure (14 days) to oxytetracycline and sulfathiazole was studied by means of repeated batch-assays. Anabolism and catabolism reactions were active during the inhibition tests indicating that anammox bacteria could grow even in the extreme conditions tested. Considering the average concentrations expected in swine wastewaters, the inhibitors studied do not seem to represent a problem for the application of the anammox process. However, in order to verify the effect of these compounds on the growth of anammox bacteria, continuous culture experiments could be conducted.

Distribution and characterization of anammox in a swine wastewater activated sludge facility

2013 ◽  
Vol 67 (10) ◽  
pp. 2330-2336 ◽  
Author(s):  
Takao Yamagishi ◽  
Mio Takeuchi ◽  
Yuichiro Wakiya ◽  
Miyoko Waki
Keyword(s):  
Activated Sludge ◽  
Swine Wastewater ◽  
Assay Method ◽  
15N Tracer ◽  
Anammox Bacteria ◽  
Aeration Tank ◽  
Ammonium Oxidation ◽  
High Concentration ◽  
Anammox Activity ◽  
Biological Nitrogen

Anaerobic ammonium oxidation (anammox) is a novel biological nitrogen removal process that oxidizes NH4+ to N2 with NO2− as an electron acceptor. The purpose of this study was to examine the potential activity and characteristics of anammox in a conventional swine wastewater treatment facility, which uses an activated sludge system consisting of three cascade aeration tanks equipped with ceramic support material. Anammox activity was estimated by a 15N tracer assay method and was detected in all the sludge and biofilm samples in each aeration tank. Biofilm taken from the third aeration tank, in which the dissolved oxygen concentration was 7.5 mg/L and the wastewater included a high concentration of NO3−, showed by far the highest anammox activity. A clone library analysis showed the existence of anammox bacteria closely related to ‘Candidatus Jettenia asiatica’ and ‘Ca. Brocadia caroliniensis’. The optimum conditions for anammox activity were a pH of 6.7–7.2, a temperature of 35 °C, a NO2− concentration of 10 mmol/L or less, and an NH4+ concentration of 32 mmol/L or less.

scholarly journals Start-Up of Anammox SBR from Non-Specific Inoculum and Process Acceleration Methods by Hydrazine

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 350
Author(s):  
Ivar Zekker ◽  
Oleg Artemchuk ◽  
Ergo Rikmann ◽  
Kelvin Ohimai ◽  
Gourav Dhar Bhowmick ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Biological Nutrient Removal ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Reject Water ◽  
Start Up ◽  
Anammox Activity ◽  
Optimum Salinity ◽  
Anammox Process

Biological nutrient removal from wastewater to reach acceptable levels is needed to protect water resources and avoid eutrophication. The start-up of an anaerobic ammonium oxidation (anammox) process from scratch was investigated in a 20 L sequence batch reactor (SBR) inoculated with a mixture of aerobic and anaerobic sludge at 30 ± 0.5 °C with a hydraulic retention time (HRT) of 2–3 days. The use of NH4Cl, NaNO2, and reject water as nitrogen sources created different salinity periods, in which the anammox process performance was assessed: low (<0.2 g of Cl−/L), high (18.2 g of Cl−/L), or optimum salinity (0.5–2 g of Cl−/L). Reject water feeding gave the optimum salinity, with an average nitrogen removal efficiency of 80%, and a TNRR of 0.08 kg N/m3/d being achieved after 193 days. The main aim was to show the effect of a hydrazine addition on the specific anammox activity (SAA) and denitrification activity in the start-up process to boost the autotrophic nitrogen removal from scratch. The effect of the anammox intermediate hydrazine addition was tested to assess its concentration effect (range of 2–12.5 mg of N2H4/L) on diminishing denitrifier activity and accelerating anammox activity at the same time. Heterotrophic denitrifiers’ activity was diminished by all hydrazine additions compared to the control; 5 mg of N2H4/L added enhanced SAA compared to the control, achieving an SAA of 0.72 (±0.01) mg N/g MLSS/h, while the test with 7.5 mg of N2H4/L reached the highest overall SAA of 0.98 (±0.09) mg N g/MLSS/h. The addition of trace amounts of hydrazine for 6 h was also able to enhance SAA after inhibition by organic carbon source sodium acetate addition at a high C/N ratio of 10/1. The start-up of anammox bacteria from the aerobic–anaerobic suspended biomass was successful, with hydrazine significantly accelerating anammox activity and decreasing denitrifier activity, making the method applicable for side-stream as well as mainstream treatment.

scholarly journals Enrichment of anaerobic ammonium oxidation (anammox) bacteria for short start-up of the anammox process: a review

2015 ◽  
Vol 57 (30) ◽  
pp. 13958-13978 ◽  
Author(s):  
Mumtazah Ibrahim ◽  
Norjan Yusof ◽  
Mohd Zulkhairi Mohd Yusoff ◽  
Mohd Ali Hassan
Keyword(s):  
Anaerobic Ammonium Oxidation ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Start Up ◽  
Anammox Process

The short- and long-term inhibitory effects of Fe (II) on anaerobic ammonium oxidizing (anammox) process

2019 ◽  
Vol 79 (10) ◽  
pp. 1860-1867 ◽  
Author(s):  
Cherh Yih Mak ◽  
Jih Gaw Lin ◽  
Wen Hsing Chen ◽  
Choon Aun Ng ◽  
Mohammed J. K. Bashir
Keyword(s):  
Quantitative Polymerase Chain Reaction ◽  
Substrate Inhibition ◽  
Optimum Concentration ◽  
Anammox Bacteria ◽  
Batch Test ◽  
Short Term ◽  
Anammox Activity ◽  
Study Results ◽  
Anammox Process

Abstract The application of the anammox process has great potential in treating nitrogen-rich wastewater. The presence of Fe (II) is expected to affect the growth and activity of anammox bacteria. Short-term (acute) and long-term effects (chronic) of Fe (II) on anammox activity were investigated. In the short-term study, results demonstrated that the optimum concentration of Fe (II) that could be added to anammox is 0.08 mM, at which specific anammox activity (SAA) improved by 60% compared to the control assay, 0.00 mM. The inhibition concentration, IC50, of Fe (II) was found to be 0.192 mM. Kinetics of anammox specific growth rate were estimated based on results of the batch test and evaluated with Han-Levenspiel's substrate inhibition kinetics model. The optimum concentration and IC50 of Fe (II) predicted by the Han-Levenspiel model was similar to the batch test, with values of 0.07 mM and 0.20 mM, respectively. The long-term effect of Fe (II) on the performance of a sequencing batch reactor (SBR) was evaluated. Results showed that an appropriate Fe (II) addition enhanced anammox activity, achieving 85% NH4+-N and 96% NO2−-N removal efficiency when 0.08 mM of Fe (II) was added. Quantitative polymerase chain reaction (qPCR) was adopted to detect and identify the anammox bacteria.

scholarly journals Physiological characteristics of the anaerobic ammonium-oxidizing bacterium ‘Candidatus Brocadia sinica’

Microbiology ◽  
2011 ◽  
Vol 157 (6) ◽  
pp. 1706-1713 ◽  
Author(s):  
Mamoru Oshiki ◽  
Masaki Shimokawa ◽  
Naoki Fujii ◽  
Hisashi Satoh ◽  
Satoshi Okabe
Keyword(s):  
Growth Rate ◽  
Removal Rate ◽  
Nitrite Reduction ◽  
Physiological Characteristics ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Phylogenetic Affiliation ◽  
Anammox Activity ◽  
Rate Kinetics ◽  
Kinetics Of

The present study investigated the phylogenetic affiliation and physiological characteristics of bacteria responsible for anaerobic ammonium oxidization (anammox); these bacteria were enriched in an anammox reactor with a nitrogen removal rate of 26.0 kg N m−3 day−1. The anammox bacteria were identified as representing ‘Candidatus Brocadia sinica’ on the basis of phylogenetic analysis of rRNA operon sequences. Physiological characteristics examined were growth rate, kinetics of ammonium oxidation and nitrite reduction, temperature, pH and inhibition of anammox. The maximum specific growth rate (μmax) was 0.0041 h−1, corresponding to a doubling time of 7 days. The half-saturation constants (K s) for ammonium and nitrite of ‘Ca. B. sinica’ were 28±4 and 86±4 µM, respectively, higher than those of ‘Candidatus Brocadia anammoxidans’ and ‘Candidatus Kuenenia stuttgartiensis’. The temperature and pH ranges of anammox activity were 25–45 °C and pH 6.5–8.8, respectively. Anammox activity was inhibited in the presence of nitrite (50 % inhibition at 16 mM), ethanol (91 % at 1 mM) and methanol (86 % at 1 mM). Anammox activities were 80 and 70 % of baseline in the presence of 20 mM phosphorus and 3 % salinity, respectively. The yield of biomass and dissolved organic carbon production in the culture supernatant were 0.062 and 0.005 mol C (mol NH 4 + )−1, respectively. This study compared physiological differences between three anammox bacterial enrichment cultures to provide a better understanding of anammox niche specificity in natural and man-made ecosystems.

scholarly journals Immobilization of Anammox biomass in sodium alginate

2018 ◽  
Vol 44 ◽  
pp. 00008 ◽  
Author(s):  
Anna Banach ◽  
Aneta Pudlo ◽  
Aleksandra Ziembińska-Buczyńska
Keyword(s):  
Sodium Alginate ◽  
Wastewater Treatment Plants ◽  
Chemical Properties ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Promising Technique ◽  
Nitrogen Gas ◽  
Slow Growth Rate ◽  
Anammox Activity ◽  
And Chemical Properties

Anaerobic ammonium oxidation (anammox) is a process of ammonium and nitrite conversion into nitrogen gas. Nowadays, anammox is applied into many wastewater treatment plants worldwide. However, anammox bacteria are characterized by a slow growth rate, which may cause problems in maintaining the biomass in the system. The promising technique which can help to maintain the biomass in the reactor and effectively prevent loss of anammox bacteria from a system is immobilization. Selection and optimization of the appropriate immobilization technique for investigated biomass is crucial for conducting an effective process. One of the ways for bacteria immobilization is gel entrapment. The main goal of the study was to test sodium alginate as an immobilization medium for anammox biomass. In the present study procedure of immobilization in sodium alginate was optimised, then the mechanical and chemical properties of the obtained pellets were investigated. Series of batch experiments revealed that immobilized anammox biomass was able to remove ammonia and nitrite nitrogen effectively. The calculated specific anammox activity (SAA) for immobilized anammox biomass was 0.18 g N·gVSS-1·d-1, while for non-immobilized biomass was 0.36 g N·gVSS-1·d-1.

scholarly journals Propionate Oxidation by and Methanol Inhibition of Anaerobic Ammonium-Oxidizing Bacteria

2005 ◽  
Vol 71 (2) ◽  
pp. 1066-1071 ◽  
Author(s):  
Didem Güven ◽  
Ana Dapena ◽  
Boran Kartal ◽  
Markus C. Schmid ◽  
Bart Maas ◽  
...  
Keyword(s):  
Organic Acids ◽  
Organic Compounds ◽  
Enrichment Culture ◽  
Cost Effective ◽  
Anaerobic Ammonium Oxidation ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Methanol Inhibition ◽  
Propionate Oxidation ◽  
Anammox Process

ABSTRACT Anaerobic ammonium oxidation (anammox) is a recently discovered microbial pathway and a cost-effective way to remove ammonium from wastewater. Anammox bacteria have been described as obligate chemolithoautotrophs. However, many chemolithoautotrophs (i.e., nitrifiers) can use organic compounds as a supplementary carbon source. In this study, the effect of organic compounds on anammox bacteria was investigated. It was shown that alcohols inhibited anammox bacteria, while organic acids were converted by them. Methanol was the most potent inhibitor, leading to complete and irreversible loss of activity at concentrations as low as 0.5 mM. Of the organic acids acetate and propionate, propionate was consumed at a higher rate (0.8 nmol min−1 mg of protein−1) by Percoll-purified anammox cells. Glucose, formate, and alanine had no effect on the anammox process. It was shown that propionate was oxidized mainly to CO2, with nitrate and/or nitrite as the electron acceptor. The anammox bacteria carried out propionate oxidation simultaneously with anaerobic ammonium oxidation. In an anammox enrichment culture fed with propionate for 150 days, the relative amounts of anammox cells and denitrifiers did not change significantly over time, indicating that anammox bacteria could compete successfully with heterotrophic denitrifiers for propionate. In conclusion, this study shows that anammox bacteria have a more versatile metabolism than previously assumed.

scholarly journals The influence of antibiotics on the anammox process — a review

2021 ◽  
Author(s):  
Filip Gamoń ◽  
Grzegorz Cema ◽  
Aleksandra Ziembińska-Buczyńska
Keyword(s):  
Antibiotic Resistance ◽  
Resistance Genes ◽  
Defense Mechanisms ◽  
Wastewater Treatment Plants ◽  
Antibiotic Resistance Genes ◽  
Anammox Bacteria ◽  
Special Focus ◽  
Ammonium Oxidation ◽  
Other Substances ◽  
Anammox Process

AbstractAnaerobic ammonium oxidation (anammox) is one of the most promising processes for the treatment of ammonium-rich wastewater. It is more effective, cheaper, and more environmentally friendly than the conventional process currently in use for nitrogen removal. Unfortunately, anammox bacteria are sensitive to various substances, including heavy metals and organic matter commonly found in the wastewater treatment plants (WWTPs). Of these deleterious substances, antibiotics are recognized to be important. For decades, the increasing consumption of antibiotics has led to the increased occurrence of antibiotics in the aquatic environment, including wastewater. One of the most important issues related to antibiotic pollution is the generation and transfer of antibiotic resistance bacteria (ARB) and antibiotic resistance genes (ARGs). Here, we will discuss the effect of short- and long-term exposure of the anammox process to antibiotic pollutants; with a special focus on the activity of the anammox bacteria, biomass properties, community structures, the presence of antibiotic resistance genes and combined effect of antibiotics with other substances commonly found in wastewater. Further, the defense mechanisms according to which bacteria adapt against antibiotic stress are speculated upon. This review aims to facilitate a better understanding of the influence of antibiotics and other co-pollutants on the anammox process and to highlight future avenues of research to target gaps in the knowledge.

scholarly journals Start up and Stabilization of Anammox Process in an Anaerobic Membrane Bioreactor (an MBR)

2017 ◽  
pp. 117
Author(s):  
S. Suneethi ◽  
Kurian Joseph
Keyword(s):  
Membrane Bioreactor ◽  
Aquatic Toxicity ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Anaerobic Membrane Bioreactor ◽  
Seed Culture ◽  
Start Up ◽  
Anammox Process

Release of nitrate and ammonia rich wastewaters into the natural waters promotes eutrophication, aquatic toxicity and deterioration in water quality. Anaerobic Ammonium Oxidation (ANAMMOX) process is an advanced biological nitrogen removal alternative to traditional nitrification – denitrification, which removes ammonia using nitrite as the electron acceptor without oxygen. The feasibility to enrich ANAMMOX bacteria from anaerobic seed culture to start up an Anaerobic Membrane Bioreactor (An MBR) for N – removal is reported in this paper. The seed culture used was anaerobic digester sludge collected from a Sewage Treatment Plant (STP) in Chennai. Stabilization performance of An MBR is reported for a period of 250 days, for the presence of ANAMMOX bacteria and its sustained activity in terms of Nitrogen transformations to Ammonia, Nitrite and Nitrate along with Hydrazine and Hydroxylamine.

Sign in / Sign up

Export Citation Format

Share Document