Toxicity and pollutant impact analysis in an urban river due to combined sewer overflows loads

2010 ◽  
Vol 61 (1) ◽  
pp. 207-215 ◽  
Author(s):  
A. Casadio ◽  
M. Maglionico ◽  
A. Bolognesi ◽  
S. Artina
Keyword(s):  
Water Quality ◽  
Impact Analysis ◽  
Waste Water Treatment ◽  
Treatment Plant ◽  
Quality Data ◽  
Waste Water Treatment Plant ◽  
Combined Sewer Overflows ◽  
Water Quality Data ◽  
Combined Sewer ◽  
Sewer Overflows

The Navile Channel (Bologna, Italy) is an ancient artificial water course derived from the Reno river. It is the main receiving water body for the urban catchment of Bologna sewer systems and also for the Waste Water Treatment Plant (WWTP) main outlet. The aim of this work is to evaluate the Combined Sewer Overflows (CSOs) impact on Navile Channel's water quality. In order to collect Navile flow and water quality data in both dry and wet weather conditions, two measuring and sampling stations were installed, right upstream and downstream the WWTP outflow. The study shows that even in case of low intensity rain events, CSOs have a significant effect on both water quantity and quality, spilling a considerable amount of pollutants into the Navile Channel and presenting also acute toxicity effects. The collected data shown a good correlations between the concentrations of TSS and of chemical compounds analyzed, suggesting that the most part of such substances is attached to suspended solids. Resulting toxicity values are fairly high in both measuring points and seem to confirm synergistic interactions between heavy metals.

Estimation of Storm Water Quality Characteristics and Overflow Loads from Treatment Plant Influent Data

1990 ◽  
Vol 22 (10-11) ◽  
pp. 77-85
Author(s):  
Roelof H. Aalderink
Keyword(s):  
Water Quality ◽  
Treatment Plant ◽  
Storm Water ◽  
Quality Data ◽  
Combined Sewer Overflows ◽  
Water Quality Data ◽  
Frequency Distributions ◽  
Simulation Techniques ◽  
Combined Sewer ◽  
In Series

A simple model, based on tanks in series, for the estimation of mean annual loads and frequency distributions of loads from combined sewer systems is presented. The input data, dry weather flow, dry weather quality, and storm water quality are estimated from treatment plant influent data. Two similar methods for the estimation of flow-average storm water quality were tested by using treatment plant influent data generated by the model in comparison with the model input. Both methods are based on daily mass balances, but differ slightly with respect to the averaging procedures used. The performance of both methods is about the same. They show a small bias, but the variability introduced is small when compared with the variation occurring in real storm water quality data. Application of one of the methods on field data revealed no distinct relationships between the flow-averaged storm water quality concentration and the dry weather period or the total daily rain depth. By combination of continuous and Monte Carlo simulation techniques the model can be used to estimate mean annual loads and frequency distribution of loads from combined sewer overflows. For the extreme events a large 90 % confidence interval was found due to the large variations in storm water quality.

Modelling of Combined Sewer Overflow Impacts on the Receiving Water Quality: Case Studies Hron and Drava

2017 ◽  
Author(s):  
Marek Sokáč ◽  
Marta Jerković
Keyword(s):  
Water Quality ◽  
Case Studies ◽  
Slovak Republic ◽  
Treatment Plant ◽  
Combined Sewer Overflows ◽  
Combined Sewer ◽  
Sewer Overflows ◽  
The Town ◽  
Receiving Water

Paper analyses the influences of combined sewer overflows (CSO’s), on the receiving water quality, but generally deals also with various types of storm water management in urban areas. The first case study analyses the impacts of the continuous (wastewater treatment plant in the town Osijek) and discontinuous pollution sources (CSO’s in the town Osijek) on the quality of the receiving water – the Drava river (Croatia). The second modelling case study was performed on the river Hron (Slovak republic). In this study, the impacts on the water quality from combined sewer overflows form the biggest town on Hron River – Banská Bystrica were studied, as well as four feasible alternatives of storm sewer management (different mixing ratio, different size of storm tanks) were analysed. For both case studies, the mathematical simulation model MIKE11 (Danish Hydraulic Institute, DHI) was used.

Implementation of Hamilton-Wentworth Region’s Pollution Control Plan

1996 ◽  
Vol 31 (3) ◽  
pp. 453-472 ◽  
Author(s):  
M. Stirrup
Keyword(s):  
Wastewater Treatment ◽  
Pollution Control ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Control Measures ◽  
Storm Events ◽  
Combined Sewer Overflows ◽  
Control Plan ◽  
Combined Sewer ◽  
Sewer Overflows

Abstract The Regional Municipality of Hamilton-Wentworth operates a large combined sewer system which diverts excess combined sewage to local receiving waters at over 20 locations. On average, there are approximately 23 combined sewer overflows per year, per outfall. The region’s Pollution Control Plan, adopted by Regional Council in 1992, concluded that the only reasonable means of dealing with large volumes of combined sewer overflow in Hamilton was to intercept it at the outlets, detain it and convey it to the wastewater treatment plant after the storm events. The recommended control strategy relies heavily on off-line storage, with an associated expansion of the Woodward Avenue wastewater treatment plant to achieve target reductions of combined sewer overflows to 1–4 per year on average. The region has begun to implement this Pollution Control Plan in earnest. Three off-line detention storage tanks are already in operation, construction of a fourth facility is well underway, and conceptual design of a number of other proposed facilities has commenced. To make the best possible use of these facilities and existing in-line storage, the region is implementing a microcomputer-based real-time control system. A number of proposed Woodward Avenue wastewater treatment plant process upgrades and expansions have also been undertaken. This paper reviews the region's progress in implementing these control measures.

Long-Term Simulation of Pollutant Loads in Treatment Plant Effluents and Combined Sewer Overflows

1990 ◽  
Vol 22 (10-11) ◽  
pp. 69-76 ◽  
Author(s):  
A. Durchschlag
Keyword(s):  
Waste Water Treatment ◽  
Treatment Plant ◽  
Storm Water ◽  
Water Runoff ◽  
Storage Tanks ◽  
Combined Sewer Overflows ◽  
Storm Water Runoff ◽  
Combined Sewer ◽  
Hydraulic Load ◽  
Water Tanks

As a result of urbanization, the pollutant discharges from sources such as treatment plant effluents and polluted stormwaters are responsible for an unacceptable water quality in the receiving waters.In particular, combined sewer system overflows may produce great damage due to a shock effect. To reduce these combined sewer overflow discharges, the most frequently used method is to build stormwater storage tanks. During storm water runoff, the hydraulic load of waste water treatment plants increases with additional retention storage. This might decrease the treatment efficiency and thereby decrease the benefit of stormwater storage tanks. The dynamic dependence between transport, storage and treatment is usually not taken into account. This dependence must be accounted for when planning treatment plants and calculating storage capacities in order to minimize the total pollution load to the receiving waters. A numerical model will be described that enables the BOD discharges to be continuously calculated. The pollutant transport process within the networks and the purification process within the treatment plants are simulated. The results of the simulation illustrate; a statistical balance of the efficiency of stormwater tanks with the treatment plant capacity and to optimize the volume of storm water tanks and the operation of combined sewer systems and treatment plants.

scholarly journals PERENCANAAN INSTALASI PENGOLAHAN AIR LIMBAH DOMESTIK DENGAN KOMBINASI UNIT BIOFILTER AEROBIK DAN ADSORPSI KARBON AKTIF KANTOR PUSAT PT.PERTAMINA MARKETING OPERATION REGION (MOR) V SURABAYA

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Ridlo Barkah Jembar Pinanggih ◽  
Dyah Ratri Nurmaningsih ◽  
Sulistiya Nengse ◽  
Teguh Taruna Utama ◽  
Abdul Hakim
Keyword(s):  
Waste Water ◽  
Activated Carbon ◽  
Treatment Plant ◽  
Quality Data ◽  
Waste Water Treatment Plant ◽  
Processing Plant ◽  
Activated Carbon Adsorption ◽  
Water Quality Data ◽  
Carbon Adsorption ◽  
Marketing Operation

Permasalahan air limbah di Indonesia merupakan isu pencemaran lingkungan yang strategis dalam pembangunan berkelanjutan, baik yang bersumber dari pemukiman penduduk maupun unit usaha perkantoran. Tingginya kandungan organik terlarut di dalam air limbah dapat menyebabkan penurunan intesitas masuknya cahaya matahari yang dibutuhkan oleh mikroorganisme fotosintetik dan berdampak pada penurunan kualitas badan air. Tujuan dari penelitian ini yaitu merencankan pembangunan unit Instalasi Pengolahan Air Limbah (IPAL) domestik di Kantor Pusat PT. Pertamina Marketing Operation Region (MOR) V Surabaya dengan menggunakan kombinasi unit biofilter aerobik dan adsorpsi karbon aktif beserta perhitungan volume bangunan dan Rencana Anggaran Biaya (RAB) yang dibutuhkan. Teknologi pengolahan ini dipilih karena memiliki keunggulan dalam meremoval kadar pencemar organik dengan tingkat efisiensi yang tinggi dan kebutuhan lahan yang tidak terlalu luas. Metode penelitian menggunakan data sekunder yang diperoleh dari data perusahaan berupa debit pemakaian air bersih, layout kantor, data kualitas air limbah, serta informasi lain yang terkait dengan perencanaan. Hasil penelitian yang didapat berupa gambar desain (DED) unit IPAL, dimensi total bangunan pengolah seluas 34m2(P=17m dan L=2m), spesifikasi bahan yang digunakan, serta rencana anggaran biaya yang dibutuhkan untuk pembangunan kontruksi unit IPAL yaitu sebesar Rp243.136.020,00. Perencanaan ini juga ditunjang dengan panduan dalam operasional dan perawatan unit IPAL.  Kata kunci: Adsorpsi karbon aktif, air limbah domestik, biofilter aerobik, desain IPAL. The problem of wastewater in Indonesia is a strategic issue of environmental pollution in sustainable development, both sourced from residential areas and office business units. The high dissolved organic content in wastewater can cause a decrease in the intensity of sunlight needed by photosynthetic microorganisms and have an impact on the quality of water bodies. The purpose of this study is to plan the construction of a domestic Waste Water Treatment Plant (WWTP) at the Head Office of PT. Pertamina Marketing Operation Region (MOR) V Surabaya using a combination of aerobic biofilter units and activated carbon adsorption along with the calculation of building volume and the required Budget Plan. This processing technology was chosen because it has advantages in renovating organic pollutant levels with a high level of efficiency and land requirements that are not too broad. The research method uses secondary data obtained from company data in the form of debit of clean water usage, office layout, waste water quality data, and other information related to planning. The results obtained in the form of design drawings (DED) of WWTP units, the total dimensions of the processing plant area of 34m2 (P = 17m and L = 2m), as well as the material specifications used, as well as the budget plan required for the construction of WWTP unit construction is Rp243. 136,020.00. This planning is also supported by guidelines in the operation and maintenance of WWTP units. Keywords: Activated carbon adsorption, aerobic biofilter, domestic wastewater, WWTP design.

scholarly journals Socio-Economic Assessment of Green Infrastructure for Climate Change Adaptation in the Context of Urban Drainage Planning

2020 ◽  
Vol 12 (9) ◽  
pp. 3792 ◽  
Author(s):  
Luca Locatelli ◽  
Maria Guerrero ◽  
Beniamino Russo ◽  
Eduardo Martínez-Gomariz ◽  
David Sunyer ◽  
...  
Keyword(s):  
Decision Making ◽  
Green Infrastructure ◽  
Waste Water Treatment ◽  
Economic Assessment ◽  
Environmental Benefits ◽  
Urban Drainage ◽  
Combined Sewer Overflows ◽  
Damage Reduction ◽  
Combined Sewer ◽  
Sewer Overflows

Green infrastructure (GI) contributes to improve urban drainage and also has other societal and environmental benefits that grey infrastructure usually does not have. Economic assessment for urban drainage planning and decision making often focuses on flood criteria. This study presents an economic assessment of GI based on a conventional cost-benefit analysis (CBA) that includes several benefits related to urban drainage (floods, combined sewer overflows and waste water treatment), environmental impacts (receiving water bodies) and additional societal and environmental benefits associated with GI (air quality improvements, aesthetic values, etc.). Benefits from flood damage reduction are monetized based on the widely used concept of Expected Annual Damage (EAD) that was calculated using a 1D/2D urban drainage model together with design storms and a damage model based on tailored flood depth–damage curves. Benefits from Combined Sewer Overflows (CSO) damage reduction were monetized using a 1D urban drainage model with continuous rainfall simulations and prices per cubic meter of spilled combined sewage water estimated from literature; other societal benefits were estimated using unit prices also estimated from literature. This economic assessment was applied to two different case studies: the Spanish cities of Barcelona and Badalona. The results are useful for decision making and also underline the relevancy of including not only flood damages in CBA of GI.

An approach for determining the most critical among a suite of chemical contaminants at a drinking water intake

2013 ◽  
Vol 13 (3) ◽  
pp. 835-845
Author(s):  
Fei Chen ◽  
William B. Anderson ◽  
Peter M. Huck
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Intake ◽  
Treatment Plant ◽  
Quality Data ◽  
Exceedance Probability ◽  
Raw Water ◽  
Water Quality Data ◽  
Treatment Processes ◽  
Raw Water Quality

An integrated approach for the identification and assessment of the most critical chemical contaminant(s) at a drinking water intake has been developed. It involves the determination of a threshold or critical raw water concentration (CRWC) for target contaminants using the observed overall removal efficiency of a specific water treatment plant (WTP) and regulated drinking water concentrations for the target contaminants. The exceedance probability relative to the CRWC based on historical raw water quality monitoring data is then calculated. Finally, the integration of the raw water quality data and the overall efficiency of a particular WTP sequence allows for identification of the most critical contaminant(s) as well as an advance indication of which contaminants are most likely to challenge a plant. The proactive nature of this approach gives a utility the impetus and time to assess current treatment processes and potential alternatives. In addition, it was found that three- or four-parameter theoretical distributions are more appropriate than two-parameter probability distributions for the fitting of raw water quality data. This study reveals that the reliance on raw and/or treated water contaminant concentrations in isolation or on theoretical removals through treatment processes can, in some circumstances, be misguided.

Sign in / Sign up

Export Citation Format

Share Document