Ecological stabilization of thickened wastewater sludge from CAST process

2008 ◽  
Vol 58 (10) ◽  
pp. 1911-1916 ◽  
Author(s):  
Y. B. Cui ◽  
X. H. Wu ◽  
Zh. Sh. Liu ◽  
J. Zh. Liu ◽  
Y. Z. Lin
Keyword(s):  
Protein Content ◽  
Operation Time ◽  
Pilot Scale ◽  
Quadratic Equation ◽  
Wastewater Sludge ◽  
Thickness Variation ◽  
Significant Difference ◽  
Treatment And Disposal ◽  
Dried Sludge ◽  
Relationship Of

Wastewater sludge ecological stabilization (WWSES) pilot scale experiments were conducted for thickening treatment and disposal of sludge which came from Cyclic Activated Sludge Technology (CAST) process. The study was performed over the periods from June to November 2005 and from May to November 2006, on a bed of 80 m2. The sludge loadings were stopped for the winter from December 2005 and resumed in May 2006. The results shows that dried sludge layer has higher permeation coefficients of 0.15–1.3 m/h. It is suggested that the percolate did not filtrate downwards evenly, part of percolate filtrates downwards along stems, roots and cracks existing in dried sludge which have lower flow resistance. The relationship of dried sludge thickness and operation time is in accord with quadratic equation under fluctuating sludge loadings. Linear regression equation can indicate dried sludge thickness variation under fixed sludge loading. In comparison with natural ones, coarse protein content of Phragmites australis roots in the system is twice as high, coarse fiber content of roots, coarse fat content of stems and leaf are obviously higher; and coarse protein content of Typha augustifolia in the system are obviously higher, while coarse fat and coarse fiber contents have no significant difference.

Ozonation of wastewater sludge for reduction and recycling

2002 ◽  
Vol 46 (10) ◽  
pp. 71-77 ◽  
Author(s):  
K.-H. Ahn ◽  
K.Y. Park ◽  
S.K. Maeng ◽  
J.H. Hwang ◽  
J.W. Lee ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Economic Assessment ◽  
Pilot Scale ◽  
Wastewater Sludge ◽  
Ozone Treatment ◽  
Sludge Treatment ◽  
Micro Particles ◽  
Belt Press ◽  
Treatment And Disposal

An ozone treatment system was introduced as an alternative method for municipal sludge treatment and disposal. A pilot-scale facility was built to investigate the feasibility of the ozonation for sludge reduction and recycle. The system consists of three main parts; advanced wastewater treatment, sludge ozone treatment and belt press dewatering. Ozonation of wastewater sludge resulted in mass reduction by mineralization as well as volume reduction by improvement of dewatering characteristics. The supernatant of the ozonated sludge, consisting of solubilized organics and micro-particles, proved to be an effective carbon source for denitrification. A simple economic assessment reveals that the ozonation process can be more economical than incineration for sludge treatment and disposal at small- and medium-sized wastewater treatment plants.

A pilot web former designed to study retention-formation relationships

2010 ◽  
Vol 25 (2) ◽  
pp. 185-194
Author(s):  
Anna Svedberg ◽  
Tom Lindström
Keyword(s):  
Pilot Scale ◽  
Operating Conditions ◽  
Montmorillonite Clay ◽  
Speed Ratio ◽  
Good Reproducibility ◽  
Total Solids ◽  
Retention Aids ◽  
Solids Content ◽  
Relationship Of ◽  
The Relationship

Abstract A pilot-scale fourdrinier former has been developed for the purpose of investigating the relationship between retention and paper formation (features, retention aids, dosage points, etc.). The main objective of this publication was to present the R-F (Retention and formation)-machine and demonstrate some of its fields of applications. For a fine paper stock (90% hardwood and 10% softwood) with addition of 25% filler (based on total solids content), the relationship between retention and formation was investigated for a microparticulate retention aid (cationic polyacrylamide together with anionic montmorillonite clay). The retention-formation relationship of the retention aid system was investigated after choosing standardized machine operating conditions (e.g. the jet-to-wire speed ratio). As expected, the formation was impaired when the retention was increased. Since good reproducibility was attained, the R-F (Retention and formation)-machine was found to be a useful tool for studying the relationship between retention and paper formation.

scholarly journals Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Yuan-Wei Zhang ◽  
Xin Xiao ◽  
Wen-Cheng Gao ◽  
Yan Xiao ◽  
Su-Li Zhang ◽  
...  
Keyword(s):  
3D Printing ◽  
Blood Loss ◽  
Three Dimensional ◽  
Operation Time ◽  
Varus Deformity ◽  
Conventional Group ◽  
Intraoperative Blood Loss ◽  
Cubitus Varus ◽  
Guide Plate ◽  
Significant Difference

Abstract Background This present study is aimed to retrospectively assess the efficacy of three-dimensional (3D) printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity. Material and methods Twenty-five patients (15 males and 10 females) with the cubitus varus deformity from June 2014 to December 2017 were included in this study and were enrolled into the conventional group (n = 11) and 3D printing group (n = 14) according to the different surgical approaches. The operation time, intraoperative blood loss, osteotomy degrees, osteotomy end union time, and postoperative complications between the two groups were observed and recorded. Results Compared with the conventional group, the 3D printing group has the advantages of shorter operation time, less intraoperative blood loss, higher rate of excellent correction, and higher rate of the parents’ excellent satisfaction with appearance after deformity correction (P < 0.001, P < 0.001, P = 0.019, P = 0.023). Nevertheless, no significant difference was presented in postoperative carrying angle of the deformed side and total complication rate between the two groups (P = 0.626, P = 0.371). Conclusions The operation assisted by 3D printing osteotomy guide plate to correct the adolescent cubitus varus deformity is feasible and effective, which might be an optional approach to promote the accurate osteotomy and optimize the efficacy.

scholarly journals Clinical Evaluation of Microendoscopy-Assisted Oblique Lateral Interbody Fusion

Medicina ◽  
2021 ◽  
Vol 57 (2) ◽  
pp. 135
Author(s):  
Tomohide Segawa ◽  
Hisashi Koga ◽  
Masahito Oshina ◽  
Katsuhiko Ishibashi ◽  
Yuichi Takano ◽  
...  
Keyword(s):  
Interbody Fusion ◽  
Outcome Measure ◽  
Operation Time ◽  
Secondary Outcome ◽  
Invasive Technique ◽  
Lateral Interbody Fusion ◽  
Surgical Methods ◽  
Significant Difference ◽  
Oblique Lateral Interbody Fusion ◽  
Lateral Interbody

Background and objectives: Oblique Lateral Interbody Fusion (OLIF) is a widely performed, minimally invasive technique to achieve lumbar lateral interbody fusion. However, some complications can arise due to constraints posed by the limited surgical space and visual field. The purpose of this study was to assess the short-term postoperative clinical outcomes of microendoscopy-assisted OLIF (ME-OLIF) compared to conventional OLIF. Materials and Methods: We retrospectively investigated 75 consecutive patients who underwent OLIF or ME-OLIF. The age, sex, diagnosis, and number of fused levels were obtained from medical records. Operation time, estimated blood loss (EBL), and intraoperative complications were also collected. Operation time and EBL were only measured per level required for the lateral procedure, excluding the posterior fixation surgery. The primary outcome measure was assessed using the Japanese Orthopedic Association Back Pain Evaluation Questionnaire (JOABPEQ). The secondary outcome measure was assessed using the Oswestry Disability Index (ODI) and the European Quality of Life–5 Dimensions (EQ-5D), measured preoperatively and 1-year postoperatively. Results: This case series consisted of 14 patients in the OLIF group and 61 patients in the ME-OLIF group. There was no significant difference between the two groups in terms of the mean operative time and EBL (p = 0.90 and p = 0.50, respectively). The perioperative complication rate was 21.4% in the OLIF group and 21.3% in the ME-OLIF group (p = 0.99). In both groups, the postoperative JOABPEQ, EQ-5D, and ODI scores improved significantly (p < 0.001). Conclusions: Although there was no significant difference in clinical results between the two surgical methods, the results suggest that both are safe surgical methods and that microendoscopy-assisted OLIF could serve as a potential alternative to the conventional OLIF procedure.

scholarly journals Optimisation of T2 and T2* sequences in MRI for better quantification of iron on transfused dependent sickle cell patients

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Azza Ahmed ◽  
Amani Baldo ◽  
A. Sulieman ◽  
Hind Mirghani ◽  
Fouad A. Abolaban ◽  
...  
Keyword(s):  
Sickle Cell ◽  
Acquisition Time ◽  
Thickness Variation ◽  
Slice Thickness ◽  
Pixel Size ◽  
Significant Difference ◽  
Repetition Time

AbstractThis work aimed to investigate the effect of different shim techniques, voxel sizes, and repetition time (TR) on using theT2 and T2* sequences to determine their optimum settings to investigate the quantification of iron in transfused dependent sickle cell patients. The effect of each of these parameters was investigated on phantoms of different Gadolinium (Gd) concentrations, on 10 volunteers and 25 patients using a1 5T MRI Philips scanner. No significant difference between the three shim techniques was noticed in either T2 or T2* sequence measurements. Pixel sizes of 1 × 1 and 2 × 2 mm provided optimum results for T2 measurements. At 1 × 1 mm pixel size the T2* measurements experienced less error in measurements than the size of 2.5 × 2.5 mm used in the literature. Even though the slice thickness variation did not provide any changes in T2 measurements, the 12 mm provided optimum T2* measurements. TR variation did not yield significant changes on either T2 or T2* measurements. These results indicate that both T2 and T2* sequences can be further improved by providing more reliable measurements and reducing acquisition time.

scholarly journals Laparoscopic proximal gastrectomy with double-tract reconstruction for upper third gastric cancer

BMC Surgery ◽  
2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Shuo-meng Xiao ◽  
Ping Zhao ◽  
Zhi Ding ◽  
Rui Xu ◽  
Chao Yang ◽  
...  
Keyword(s):  
Gastric Cancer ◽  
Proximal Gastrectomy ◽  
Operation Time ◽  
Nutrition Status ◽  
Proximal Gastric Cancer ◽  
Double Tract Reconstruction ◽  
Significant Difference ◽  
Laparoscopic Proximal Gastrectomy ◽  
Gastric Cancer Patients ◽  
Upper Third

Abstract Background Proximal gastrectomy with double-tract reconstruction (DTR) has been used for upper third gastric cancer as a function-preserving procedure. However, the safety and feasibility of laparoscopic proximal gastrectomy (LPG) with DTR remain uncertain. This study compared open proximal gastrectomy (OPG) with DTR and LPG with DTR for proximal gastric cancer. Methods Sixty-four patients who had undergone OPG with DTR and forty-six patients who had undergone LPG with DTR were enrolled in this case–control study. The clinical characteristics, surgical outcomes and postoperative nutrition index were analysed retrospectively. Results The operation time was significantly longer in the LGP group than in the OPG group (258.3 min vs 205.8 min; p = 0.00). However, the time to first flatus and postoperative hospital stay were shorter in the LPG group [4.0 days vs 3.5 days (p = 0.00) and 10.6 days vs 9.2 days (p = 0.001), respectively]. No significant difference was found between the two groups in the number of retrieved lymph nodes, complications or reflux oesophagitis. The nutrition status was assessed using the haemoglobin, albumin, prealbumin and weight levels from pre-operation to six months after surgery. No significant difference was found between the groups. Conclusion LPG with DTR can be safely performed for proximal gastric cancer patients by experienced surgeons.

scholarly journals Traditional versus mirror three-dimensional printing technology for isolated acetabular fractures: a retrospective study with a median follow-up of 25 months

2021 ◽  
Vol 49 (6) ◽  
pp. 030006052110285
Author(s):  
Kai Xiao ◽  
Bo Xu ◽  
Lin Ding ◽  
Weiguang Yu ◽  
Lei Bao ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Operation Time ◽  
Harris Hip Score ◽  
Acetabular Fractures ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Significant Difference

Objective To assess the outcomes of traditional three-dimensional (3D) printing technology (TPT) versus mirror 3D printing technology (MTT) in treating isolated acetabular fractures (IAFs). Methods Consecutive patients with an IAF treated by either TPT or MTT at our tertiary medical centre from 2012 to 2018 were retrospectively reviewed. Follow-up was performed 1, 3, 6, and 12 months postoperatively and annually thereafter. The primary outcome was the Harris hip score (HHS), and the secondary outcomes were major intraoperative variables and key orthopaedic complications. Results One hundred fourteen eligible patients (114 hips) with an IAF (TPT, n = 56; MTT, n = 58) were evaluated. The median follow-up was 25 months (range, 21–28 months). At the last follow-up, the mean HHS was 82.46 ±14.70 for TPT and 86.30 ± 13.26 for MTT with a statistically significant difference. Significant differences were also detected in the major intraoperative variables (operation time, intraoperative blood loss, number of fluoroscopic screenings, and anatomical reduction number) and the major orthopaedic complications (loosening, implant failure, and heterotopic ossification). Conclusion Compared with TPT, MTT tends to produce accurate IAF reduction and may result in better intraoperative variables and a lower rate of major orthopaedic complications.

scholarly journals An Assessment of Treated Greywater Reuse in Irrigation on Growth and Protein Content of Prosopis and Albizia

Horticulturae ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 38
Author(s):  
Naji K. Al-Mefleh ◽  
Yahia A. Othman ◽  
Maher J. Tadros ◽  
Amani Al-Assaf ◽  
Samer Talozi
Keyword(s):  
Protein Content ◽  
Crude Protein ◽  
Dry Weight ◽  
World Health ◽  
Quality Analysis ◽  
Distilled Water ◽  
Albizia Lebbeck ◽  
Forage Production ◽  
Water Control ◽  
Significant Difference

This study investigated the influence of treated greywater on growth and protein content of multipurpose (forage and ornamental) transplants, Prosopis juliflora L., Prosopis tamarugo L., and Albizia lebbeck L. Transplants of tested species were irrigated with treated greywater, diluted greywater (grey + distilled water, 1:1/by volume), and distilled water (control) for seven months. Water quality analysis showed that the concentrations of nutrients and heavy metals found in the greywater were within the acceptable range compared with Jordan Institution for Standard and Metrology (JISM) and the World Health Organization (WHO) thresholds for safe use of greywater. Escherichia coli found in the greywater were lower compared to JISM and WHO guidelines for the safe use of greywater. Irrigation with treated greywater increased shoot fresh weight by 24–39% and dry weight by 34–40% compared to diluted greywater and control. No significant difference in crude protein was noticed between water treatments. Prosopis species (P. juliflora Albizia lebbeck L. and P. tamarugo Albizia lebbeck L.) had higher shoot fresh (35%) and dry weight the same species had lower crude protein (44%) when compared to Albizia lebbeck Albizia lebbeck L. The reuse of treated greywater for landscaping or forage production alleviates the demand for water resources and reduces the pressure on wastewater treatment plants. However, considering the controversial findings of previous studies on greywater quality (especially, long-term reuse), the reuse of treated greywater needs to be considered with caution and periodic quality analyses and economic assessments are required.

scholarly journals MUC1 and MUC5AC Acting on Helicobacter pylori-Related Deficiency and Solid Syndrome of Spleen and Stomach

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Ling Hu ◽  
Wanqun Chen ◽  
Ming Cheng ◽  
Ting Zhang ◽  
Shaoyang Lan ◽  
...  
Keyword(s):  
Helicobacter Pylori ◽  
Dynamic Equilibrium ◽  
Deficiency Syndrome ◽  
Blue Staining ◽  
Significant Difference ◽  
Tai Ji ◽  
Hematoxylin And Eosin ◽  
Relationship Of ◽  
Heat Syndrome ◽  
The Relationship

To investigate the relationship of MUC1, MUC5AC, and the syndrome of spleen and stomach, 109 subjects (34 peptic ulcer (PU), 62 chronic gastritis (CG), and 13 healthy volunteers (CON)) were included. All the subjects included were surveyed with questionnaire to classify them into damp-heat syndrome of spleen and stomach (DHSS), spleen-qi deficiency syndrome (SQD), and CON, examined by gastric endoscope, and biopsied. Rapid urease and methylene blue staining (MBS) were performed on every subject to diagnose for Helicobacter pylori (Hp) infection, and both were defined as Hp-positive. Hematoxylin and eosin (HE) staining was performed on every specimen to explore the histomorphology, inflammatory degree, and inflammatory activity of different groups; then Elivision™ plus kit was used to test the expression of MUC1 and MUC5AC. All the results of digital images were reviewed by two experts blindly. The inflammatory degree with Hp infection was higher than those uninfected or CON, but no significant difference was found between DHSS and SQD. And the expressions of MUC5AC with positive Hp was higher than those with negative Hp or CON regardless of the deficiency and solid syndrome of spleen-stomach but not for MUC1. We speculate that the deficiency and solid syndrome of spleen-stomach is a condition like Tai Ji symbol of dynamic equilibrium, showing the higher expression of MUC5AC but no change of MUC1 in the circumstance of Hp infection.

scholarly journals Intraoperative Nice knots assistance for reduction in displaced comminuted clavicle fractures

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Fangning Hu ◽  
Xi Liu ◽  
Fanxiao Liu ◽  
Honglei Jia ◽  
Xiaolong Lv ◽  
...  
Keyword(s):  
Blood Loss ◽  
Rating Scale ◽  
Clavicle Fracture ◽  
Operation Time ◽  
Clinical Results ◽  
Intraoperative Blood Loss ◽  
Traditional Group ◽  
Significant Difference ◽  
Clavicle Fractures ◽  
Displaced Clavicle Fracture

Abstract Purpose The Nice knots have been widely used in orthopedic surgeries to fix torn soft tissue and fracture in recent years. The study aims to investigate the clinical efficacy and prognosis of intraoperative and postoperative Nice Knots-assisted reduction in the treatment of displaced comminuted clavicle fracture. Methods From Jan 2014 to Dec 2019, 75 patients diagnosed with unilateral closed displaced comminuted clavicle fracture were treated with open reduction and internal fixation (ORIF) in this study. Nice knot group (the NK group) included 38 patients and the other 37 patients were in the traditional group (the TK group). The time of operation and the amount of bleeding during operation were recorded. Post-operative clinical outcomes and radiographic results were recorded and compared between these two groups. The Visual Analogue Scale (VAS), Neer score, Rating Scale of the American Shoulder and Elbow Surgeons, Constant-Murley score and complications such as infection, nonunion, implant loosening, fragment displacement and hardware pain were observed in the two groups. Results In the comparison between the two groups, there was no significant difference in age, sex, the cause of displaced clavicle fracture, and other basic information between the two groups. The operation time, intraoperative fluoroscopy time, and intraoperative blood loss were significantly reduced in the NK group (P < 0.01). There were 2 cases of plate fracture in the TK group. The follow-up results showed that there was no significant difference in VAS, Neer score, ASES, and Constant-Murley scores between the two groups. Conclusion The use of Nice knot, in comminuted and displaced clavicle fractures can reduce intraoperative blood loss, shorten operation time, facilitate intraoperative reduction, and achieve satisfactory postoperative clinical results. This study demonstrates that Nice knot is a simple, safe, practical and effective auxiliary reduction method.

Sign in / Sign up

Export Citation Format

Share Document