RTD (residence time distribution) predictions in large mechanically aerated lagoons

2007 ◽  
Vol 55 (11) ◽  
pp. 29-36 ◽  
Author(s):  
D. Stropky ◽  
K. Pougatch ◽  
P. Nowak ◽  
M. Salcudean ◽  
P. Pagoria ◽  
...  
Keyword(s):  
Paper Industry ◽  
Three Dimensional ◽  
Field Measurements ◽  
Particle Method ◽  
Practical Method ◽  
Hydraulic Performance ◽  
Computational Time ◽  
Complex Flow ◽  
Mechanical Agitation ◽  
Sludge Accumulation

Mechanically aerated lagoons (used for wastewater treatment in the pulp and paper industry) are typically very large (>500,000 m3) and have complex three-dimensional fluid flow patterns due to mechanical agitation, sludge accumulation, internal baffling, and confined inlet/outlet flow channels. RTD data is frequently used for evaluation of hydraulic performance. however, obtaining accurate data with traditional dye measurements is a difficult and time-consuming process. Moreover, the mixing impact of factors such as aerator positions, sludge accumulation, and internal baffles would require a significant and costly number of local field measurements. Recent applications of CFD to mechanically aerated lagoons have helped engineers to understand the complex flow interactions. This paper provides a practical method for the evaluation of the hydraulic performance of large mechanically aerated lagoons using CFD. A method, based on random-walk Lagrangian particle tracking, has been developed to significantly shorten the computational time needed to produce RTD curves for these lagoons. Comparison of the particle method with the more conventional scalar transport yields excellent results. These methods allow wastewater engineers to combine their existing knowledge and expertise with the established power of CFD. The results quantify the hydraulic impact of different inlet/outlet configurations, aerator configurations, influent flow rates, and bottom sludge profiles.

scholarly journals Blowing and drifting snow in Alpine terrain: numerical simulation and related field measurements

1998 ◽  
Vol 26 ◽  
pp. 174-178 ◽  
Author(s):  
Peter Gauer
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Three Dimensional ◽  
Field Measurements ◽  
Blowing Snow ◽  
Related Field ◽  
Drifting Snow ◽  
Physically Based ◽  
Snow Transport

A physically based numerical model of drifting and blowing snow in three-dimensional terrain is developed. The model includes snow transport by saltation and suspension. As an example, a numerical simulation for an Alpine ridge is presented and compared with field measurements.

scholarly journals A Proof-of-Concept Algorithm for the Retrieval of Total Column Amount of Trace Gases in a Multi-Dimensional Atmosphere

2021 ◽  
Vol 13 (2) ◽  
pp. 270
Author(s):  
Adrian Doicu ◽  
Dmitry S. Efremenko ◽  
Thomas Trautmann
Keyword(s):  
Trace Gases ◽  
Three Dimensional ◽  
Principal Component ◽  
Radiative Transfer Model ◽  
Computational Time ◽  
Transfer Model ◽  
Proof Of Concept ◽  
Discrete Ordinate ◽  
Distribution Method ◽  
Total Column

An algorithm for the retrieval of total column amount of trace gases in a multi-dimensional atmosphere is designed. The algorithm uses (i) certain differential radiance models with internal and external closures as inversion models, (ii) the iteratively regularized Gauss–Newton method as a regularization tool, and (iii) the spherical harmonics discrete ordinate method (SHDOM) as linearized radiative transfer model. For efficiency reasons, SHDOM is equipped with a spectral acceleration approach that combines the correlated k-distribution method with the principal component analysis. The algorithm is used to retrieve the total column amount of nitrogen for two- and three-dimensional cloudy scenes. Although for three-dimensional geometries, the computational time is high, the main concepts of the algorithm are correct and the retrieval results are accurate.

scholarly journals Simulation of Thermal and Electric Field Distribution in Packaged Sausages Heated in a Stationary Versus a Rotating Microwave Oven

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1622
Author(s):  
Wipawee Tepnatim ◽  
Witchuda Daud ◽  
Pitiya Kamonpatana
Keyword(s):  
Temperature Distribution ◽  
Electric Field ◽  
Three Dimensional ◽  
Development Stage ◽  
Microwave Oven ◽  
Computational Time ◽  
Plastic Package ◽  
Heating Uniformity ◽  
The Cost ◽  
Good Agreement

The microwave oven has become a standard appliance to reheat or cook meals in households and convenience stores. However, the main problem of microwave heating is the non-uniform temperature distribution, which may affect food quality and health safety. A three-dimensional mathematical model was developed to simulate the temperature distribution of four ready-to-eat sausages in a plastic package in a stationary versus a rotating microwave oven, and the model was validated experimentally. COMSOL software was applied to predict sausage temperatures at different orientations for the stationary microwave model, whereas COMSOL and COMSOL in combination with MATLAB software were used for a rotating microwave model. A sausage orientation at 135° with the waveguide was similar to that using the rotating microwave model regarding uniform thermal and electric field distributions. Both rotating models provided good agreement between the predicted and actual values and had greater precision than the stationary model. In addition, the computational time using COMSOL in combination with MATLAB was reduced by 60% compared to COMSOL alone. Consequently, the models could assist food producers and associations in designing packaging materials to prevent leakage of the packaging compound, developing new products and applications to improve product heating uniformity, and reducing the cost and time of the research and development stage.

scholarly journals A Fast Two-Dimensional Numerical Method for the Wake Simulation of a Vertical Axis Wind Turbine

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 49
Author(s):  
Zheng Yuan ◽  
Jin Jiang ◽  
Jun Zang ◽  
Qihu Sheng ◽  
Ke Sun ◽  
...  
Keyword(s):  
Velocity Distribution ◽  
Numerical Method ◽  
Three Dimensional ◽  
Particle Method ◽  
Vortex Method ◽  
Vertical Axis ◽  
Two Dimensional ◽  
Vertical Axis Wind Turbine ◽  
Wake Effect ◽  
Array Design

In the array design of the vertical axis wind turbines (VAWT), the wake effect of the upstream VAWT on the downstream VAWT needs to be considered. In order to simulate the velocity distribution of a VAWT wake rapidly, a new two-dimensional numerical method is proposed, which can make the array design easier and faster. In this new approach, the finite vortex method and vortex particle method are combined to simulate the generation and evolution of the vortex, respectively, the fast multipole method (FMM) is used to accelerate the calculation. Based on a characteristic of the VAWT wake, that is, the velocity distribution can be fitted into a power-law function, a new correction model is introduced to correct the three-dimensional effect of the VAWT wake. Finally, the simulation results can be approximated to the published experimental results in the first-order. As a new numerical method to simulate the complex VAWT wake, this paper proves the feasibility of the method and makes a preliminary validation. This method is not used to simulate the complex three-dimensional turbulent evolution but to simulate the velocity distribution quickly and relatively accurately, which meets the requirement for rapid simulation in the preliminary array design.

scholarly journals Transient Three-Dimensional Flow Field Measurements by Means of 3D µPTV in Drying Poly(Vinyl Acetate)-Methanol Thin Films Subject to Short-Scale Marangoni Instabilities

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1223
Author(s):  
Max Tönsmann ◽  
Philip Scharfer ◽  
Wilhelm Schabel
Keyword(s):  
Flow Field ◽  
Vinyl Acetate ◽  
Three Dimensional ◽  
Field Measurements ◽  
Initial Assessment ◽  
Ambient Conditions ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Short Scale ◽  
Dry Film

Convective Marangoni instabilities in drying polymer films may induce surface deformations, which persist in the dry film, deteriorating product performance. While theoretic stability analyses are abundantly available, experimental data are scarce. We report transient three-dimensional flow field measurements in thin poly(vinyl acetate)-methanol films, drying under ambient conditions with several films exhibiting short-scale Marangoni convection cells. An initial assessment of the upper limit of thermal and solutal Marangoni numbers reveals that the solutal effect is likely to be the dominant cause for the observed instabilities.

scholarly journals Estimation of 6D Object Pose Using a 2D Bounding Box

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 2939
Author(s):  
Yong Hong ◽  
Jin Liu ◽  
Zahid Jahangir ◽  
Sheng He ◽  
Qing Zhang
Keyword(s):  
Neural Network ◽  
Loss Function ◽  
Three Dimensional ◽  
Unit Vector ◽  
Prediction Algorithm ◽  
Computational Time ◽  
Bounding Box ◽  
Dimensional Unit ◽  
Bounding Boxes ◽  
Rgb Image

This paper provides an efficient way of addressing the problem of detecting or estimating the 6-Dimensional (6D) pose of objects from an RGB image. A quaternion is used to define an object′s three-dimensional pose, but the pose represented by q and the pose represented by -q are equivalent, and the L2 loss between them is very large. Therefore, we define a new quaternion pose loss function to solve this problem. Based on this, we designed a new convolutional neural network named Q-Net to estimate an object’s pose. Considering that the quaternion′s output is a unit vector, a normalization layer is added in Q-Net to hold the output of pose on a four-dimensional unit sphere. We propose a new algorithm, called the Bounding Box Equation, to obtain 3D translation quickly and effectively from 2D bounding boxes. The algorithm uses an entirely new way of assessing the 3D rotation (R) and 3D translation rotation (t) in only one RGB image. This method can upgrade any traditional 2D-box prediction algorithm to a 3D prediction model. We evaluated our model using the LineMod dataset, and experiments have shown that our methodology is more acceptable and efficient in terms of L2 loss and computational time.

Computational and Experimental Study of Enhanced Laminar Flow Heat Transfer in Three-Dimensional Sinusoidal Wavy-Plate-Fin Channels

2003 ◽  
Author(s):  
Jiehai Zhang ◽  
Arun Muley ◽  
Joseph B. Borghese ◽  
Raj M. Manglik
Keyword(s):  
Heat Transfer ◽  
Flow Behavior ◽  
Computational Simulation ◽  
Three Dimensional ◽  
Heat Fluxes ◽  
Staggered Grid ◽  
Uniform Heat Flux ◽  
Complex Flow ◽  
Constant Property ◽  
Fin Efficiency

Enhanced heat transfer characteristics of low Reynolds number airflows in three-dimensional sinusoidal wavy plate-fin channels are investigated. For the computational simulation, steady state, constant property, periodically developed, laminar forced convection is considered with the channel surface at the uniform heat flux condition; the wavy-fin is modeled by its two asymptotic limits of 100% and zero fin efficiency. The governing equations are solved numerically using finite-volume techniques for a non-orthogonal, non-staggered grid. Computational results for velocity and temperature distribution, isothermal Fanning friction factor f and Colburn factor j are presented for airflow rates in the range of 10 ≤ Re ≤ 1500. The numerical results are further compared with experimental data, with excellent agreement, for two different wavy-fin geometries. The influence of fin density on the flow behavior and the enhanced convection heat transfer are highlighted. Depending on the flow rate, a complex flow structure is observed, which is characterized by the generation, spatial growth and dissipation of vortices in the trough region of the wavy channel. The thermal boundary layers on the fin surface are periodically disrupted, resulting in high local heat fluxes. The overall heat transfer performance is improved considerably, compared to the straight channel with the same cross-section, with a relatively smaller increase in the associated pressure drop penalty.

Sign in / Sign up

Export Citation Format

Share Document