Integrated urban drainage, status and perspectives

2002 ◽  
Vol 45 (3) ◽  
pp. 1-10 ◽  
Author(s):  
P. Harremös

This paper summarises the status of urban storm drainage as an integrated professional discipline, including the management-policy interface, by which the goals of society are implemented. The paper assesses the development of the discipline since the INTERURBA conference in 1992 and includes aspects of the papers presented at the INTERURBA-II conference in 2001 and the discussions during the conference. Tools for integrated analysis have been developed, but there is less implementation than could be expected. That is due to lack of adequate knowledge about important mechanisms, coupled with a significant conservatism in the business. However, significant integrated analyses have been reported. Most of them deal with the sewer system and the treatment plant, while few incorporate the receiving water as anything but the object of the loads to be minimised by engineering measures up-stream. Important measures are local infiltration, source control, storage basins, local treatment and real time control. New paradigms have been introduced: risk of pollution due to system failure, technology for water reuse, sustainability, new architecture and greener up-stream solutions as opposed to down-stream concrete solutions. The challenge is to combine the inherited approaches with the new approaches by flexibility and adaptability.

2020 ◽  
Vol 6 (5) ◽  
pp. 1357-1369
Author(s):  
Sara C. Troutman ◽  
Nancy G. Love ◽  
Branko Kerkez

An open-source control algorithm for combined sewers demonstrates how treatment plant benefits can be balanced with operation of the collection system.


1992 ◽  
Vol 23 (2) ◽  
pp. 121-136 ◽  
Author(s):  
Fons Nelen ◽  
Annemarieke Mooijman ◽  
Per Jacobsen

A control simulation model, called LOCUS, is used to investigate the effects of spatially distributed rain and the possibilities to benefit from this phenomenon by means of real time control. The study is undertaken for a catchment in Copenhagen, where rainfall is measured with a network of 8 rain gauges. Simulation of a single rain event, which is assumed to be homogeneous, i.e. using one rain gauge for the whole catchment, leads to large over- and underestimates of the systems output variables. Therefore, when analyzing a single event the highest possible degree of rainfall information may be desired. Time-series simulations are performed for both an uncontrolled and a controlled system. It is shown that from a statistical point of view, rainfall distribution is NOT significant concerning the probability of occurrence of an overflow. The main contributing factor to the potential of real time control, concerning minimizing overflows, is to be found in the system itself, i.e. the distribution of available storage and discharge capacity. When other operational objectives are involved, e.g., to minimize peak flows to the treatment plant, rainfall distribution may be an important factor.


1998 ◽  
Vol 37 (1) ◽  
pp. 347-354 ◽  
Author(s):  
Ole Mark ◽  
Claes Hernebring ◽  
Peter Magnusson

The present paper describes the Helsingborg Pilot Project, a part of the Technology Validation Project: “Integrated Wastewater” (TVP) under the EU Innovation Programme. The objective of the Helsingborg Pilot Project is to demonstrate implementation of integrated tools for the simulation of the sewer system and the wastewater treatment plant (WWTP), both in the analyses and the operational phases. The paper deals with the programme for investigating the impact of real time control (RTC) on the performance of the sewer system and wastewater treatment plant. As the project still is in a very early phase, this paper focuses on the modelling of the transport of pollutants and the evaluation of the effect on the sediment deposition pattern from the implementation of real time control in the sewer system.


2002 ◽  
Vol 45 (3) ◽  
pp. 229-237 ◽  
Author(s):  
T. Frehmann ◽  
A. Niemann ◽  
P. Ustohal ◽  
W.F. Geiger

Four individual mathematical submodels simulating different subsystems of urban drainage were intercoupled to an integral model. The submodels (for surface runoff, flow in sewer system, wastewater treatment plant and receiving water) were calibrated on the basis of field data measured in an existing urban catchment investigation. Three different strategies for controlling the discharge in the sewer network were defined and implemented in the integral model. The impact of these control measures was quantified by representative immission state-parameters of the receiving water. The results reveal that the effect of a control measure may be ambivalent, depending on the referred component of a complex drainage system. Furthermore, it is demonstrated that the drainage system in the catchment investigation can be considerably optimised towards environmental protection and operation efficiency if an appropriate real time control on the integral scale is applied.


2015 ◽  
Vol 73 (7) ◽  
pp. 1637-1643 ◽  
Author(s):  
Stefan Kroll ◽  
Geert Dirckx ◽  
Brecht M. R. Donckels ◽  
Mieke Van Dorpe ◽  
Marjoleine Weemaes ◽  
...  

In order to comply with effluent standards, wastewater operators need to avoid hydraulic overloading of the wastewater treatment plant (WWTP), as this can result in the washout of activated sludge from secondary settling tanks. Hydraulic overloading can occur in a systematic way, for instance when sewer network connections are extended without increasing the WWTP's capacity accordingly. This study demonstrates the use of rule-based real-time control (RTC) to reduce the load to the WWTP while restricting the overall overflow volume of the sewer system to a minimum. Further, it shows the added value of RTC despite the limited availability of monitoring data and information on the catchment through a parsimonious simulation approach, using relocation of spatial system boundaries and creating required input data through reverse modelling. Focus was hereby on the accurate modelling of pump hydraulics and control. Finally, two different methods of global sensitivity analysis were employed to verify the influence of parameters of both the model and the implemented control algorithm. Both methods show the importance of good knowledge of the system properties, but that monitoring errors play a minor role.


1994 ◽  
Vol 29 (1-2) ◽  
pp. 1-10 ◽  
Author(s):  
J. Maršálek ◽  
D. Sztruhár

Recent developments in urban storm drainage are reviewed starting with rainfall/runoff processes, followed by discussions of combined sewage, drainage impacts on receiving waters, impact mitigation, hydroinformatics, regulatory programs and conclusions. The most promising trends in this field include improvements in spatial definition of rainfall data, runoff modelling with a limited number of model parameters and recognition of modelling uncertainties, analytical statistical modelling of runoff quality, advances in the understanding and modelling of sewer sediment transport, the use of biomonitoring and modelling in assessing drainage impacts on receiving waters, further refinement of best management practices for stormwater management, development of new processes for treatment of stormwater, experience with vortex combined sewer overflow structures and their applications in combination with other treatment devices, real time control of sewer system operation, advances in hydroinformatics leading to improvements in the integrated management and modelling of drainage systems, interfacing of drainage models with geographic information systems, and improved regulation of drainage effluents.


2018 ◽  
Vol 2017 (2) ◽  
pp. 552-560 ◽  
Author(s):  
Manfred Schütze ◽  
Maja Lange ◽  
Michael Pabst ◽  
Ulrich Haas

Abstract This contribution serves two purposes. (1) It presents an updated version of the Astlingen example developed by the working group ‘Integral Real Time Control’ of the German Water Association (DWA), which serves as a benchmark example for the setup and evaluation of real time control strategies. As this benchmark is also intended for educational use, it demonstrates a simple RTC algorithm, illustrating the main concepts of RTC of drainage system. (2) The paper also encourages the preliminary analysis of the potential feasibility and benefit of a temporal increase of inflow to the wastewater treatment plant (WWTP) before analysing the WWTP behaviour in detail. For the present example, RTC within the sewer system alone led to almost the same reduction of overflow volume as permitting the inflow to the WWTP to be increased for 6 h within any 24 h, if at all permitted.


2014 ◽  
Vol 70 (10) ◽  
pp. 1594-1601 ◽  
Author(s):  
Shijian Ge ◽  
Yunpeng Zhu ◽  
Shuang Qiu ◽  
Xiong Yang ◽  
Bin Ma ◽  
...  

This study evaluated the performance of a full-scale upgrade of an existing wastewater treatment plant (WWTP) with the intermittent cyclic extended aeration system (ICEAS), located in Qingdao, China. The ICEAS system was not able to meet effluent standards; therefore, a series of modifications and control strategies were applied as follows: (1) floating plastic carriers were added to the tank to aid biofilm formation; (2) operation parameters such as mixing and aeration time, feeding rate, and settling time were adjusted and controlled with a real-time control system; (3) a sludge return system and submersible water impellers were added; (4) the aeration system was also improved to circulate carriers and prevent clogging. The modified ICEAS system exhibited efficient organic and nutrient removal, with high removal efficiencies of chemical oxygen demand (89.57 ± 4.10%), NH4+-N (95.46 ± 3.80%), and total phosphorus (91.90 ± 4.36%). Moreover, an annual power reduction of 1.04 × 107 kW·h was realized as a result of these modifications.


Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 191
Author(s):  
Gozen Elkiran ◽  
Fidan Aslanova ◽  
Salim Hiziroglu

Northern Cyprus (NC) is suffering from limited water resources and reiterated drought condition experiences due to global warming effects. Previous studies revealed that the water management policy in the country is not sustainable from the perspective of demand and balance. Apparently, the reuse of recycled water will be an alternative resource and can be utilized for some specific purposes to reduce water extraction from the ground. It is expected that treated wastewater will reach 20 million cubic meters (MCM) per year after the completion of the new sewage system for Lefkosa. Today, 20,000 m3 of wastewater is treated at the Lefkosa Central Treatment Plant up to the secondary treatment level, in which the degree of treatment varies from 60% to 95% owing to the weather conditions in the country during the year. Effluent water reuse in NC was not accepted due to cultural belief. However, water scarcity was experienced in the country during the last decade, forcing the farmers to benefit from the recycled water. There is no regulatory framework available in the country for effluent water reuse. However, preparation studies are almost finalized after discussions among government and European Union (EU) agencies. Cyprus, as an EU country, has an obligation to treat the wastewater up to the secondary level before releasing it in an environmentally friendly nature, following the Directive 91/271/EEC. This paper analyzes the effluent water reuse possibilities as a component of integrated water resource management in Northern Cyprus considering laboratory experiment results. It appears that applying tertiary treatment in Northern Cyprus will allow 20 MCM of water contribution to the water budget and it will help protect the vulnerable environment. Also, since the cost of tertiary treatment will be 0.2 United States dollars (USD)/m3, it would be reasonable to prefer this process to the desalination of water, which costs of 1 USD/m3.


2002 ◽  
Vol 45 (4-5) ◽  
pp. 373-381 ◽  
Author(s):  
J. Meirlaen ◽  
P.A. Vanrolleghem

Real time control is one of the possibilities to minimise the impact of the integrated urban wastewater system (sewer system and treatment plant) on the receiving water quality. Integrated control uses information about the river state to act in the sewer system or in treatment plant. In order to test and tune these integrated controllers, a simplified integrated model is needed. Even with these simplified models, the simulation times may be too long and further model reduction is needed. In this paper, dependency-structure based model reduction is proposed as a technique to further reduce model complexity. Three steps are proposed: relocation of the upstream system boundaries to just upstream of the first control point, relocation of the downstream boundaries to just downstream of the last measurement point, and third, a further model simplification based on an analysis of the sensitivity of the control actions on submodel elimination. The effect of applying the different reduction approaches on the control strategy and on the resulting river water quality is discussed on the basis of a case study of the catchment of Tielt.


Sign in / Sign up

Export Citation Format

Share Document