Matching odour treatment processes to odour sources

2000 ◽  
Vol 41 (9) ◽  
pp. 227-232 ◽  
Author(s):  
J. Jeavons ◽  
P. Hodgson ◽  
J. Upton
Keyword(s):  
New Technology ◽  
Air Flow ◽  
Sewage Treatment ◽  
Cost Effective ◽  
Control Technology ◽  
Flow Rates ◽  
Treatment Processes ◽  
Odour Control ◽  
Technology Processes

Severn Trent Water Ltd. has reviewed the performance of its existing odour control technology and conducted trials with new technology. Processes were then selected for a costing exercise for air flow rates and odour concentrations typically found at sewage treatment works. The most cost effective processes for various applications are outlined.

scholarly journals Horizontal Drilling: Regulatory and Contractual Implications

1992 ◽  
Vol 30 (1) ◽  
pp. 272
Author(s):  
R. E. Pelzer ◽  
R. A. Lehodey
Keyword(s):  
New Technology ◽  
Horizontal Wells ◽  
Cost Effective ◽  
Gas Industry ◽  
Horizontal Drilling ◽  
Flow Rates ◽  
Legal Implications ◽  
Natural Gas Industry ◽  
Technological Developments ◽  
The Common

Recent technological developments have allowed the petroleum and natural gas industry to drill horizontal wells on a cost-effective basis. Although the technology is still relatively new in Canada, it has potentially significant benefits to the industry, including greater flow rates per well and greater ultimate recovery of petroleum substances. It has been estimated that by 1995 there may be as many as 450 horizontal wells drilled in Alberta per year. The implications of horizontal drilling are that the current regulatory schemes and certain of the common agreements utilized in the industry do not readily accommodate it. The authors discuss some of the legal implications raised by the new technology and examine problems with the current regulatory schemes and certain industry agreements.

Teletinnitus Program at the VA Gulf Coast Veterans Health Care System

2014 ◽  
Vol 4 (1) ◽  
pp. 23-29
Author(s):  
Constance Hilory Tomberlin
Keyword(s):  
Health Care ◽  
Patient Satisfaction ◽  
Patient Care ◽  
Health Care System ◽  
Gulf Coast ◽  
New Technology ◽  
Cost Effective ◽  
Veterans Health ◽  
Potential Benefits ◽  
Care System

There are a multitude of reasons that a teletinnitus program can be beneficial, not only to the patients, but also within the hospital and audiology department. The ability to use technology for the purpose of tinnitus management allows for improved appointment access for all patients, especially those who live at a distance, has been shown to be more cost effective when the patients travel is otherwise monetarily compensated, and allows for multiple patient's to be seen in the same time slots, allowing for greater access to the clinic for the patients wishing to be seen in-house. There is also the patient's excitement in being part of a new technology-based program. The Gulf Coast Veterans Health Care System (GCVHCS) saw the potential benefits of incorporating a teletinnitus program and began implementation in 2013. There were a few hurdles to work through during the beginning organizational process and the initial execution of the program. Since the establishment of the Teletinnitus program, the GCVHCS has seen an enhancement in patient care, reduction in travel compensation, improvement in clinic utilization, clinic availability, the genuine excitement of the use of a new healthcare media amongst staff and patients, and overall patient satisfaction.

Nitrogen Removal from Anaerobically-Treated Leachate

1984 ◽  
Vol 19 (1) ◽  
pp. 87-100
Author(s):  
D. Prasad ◽  
J.G. Henry ◽  
P. Elefsiniotis
Keyword(s):  
Nitrogen Removal ◽  
Air Flow ◽  
Operating Conditions ◽  
Air Flow Rate ◽  
Flow Rates ◽  
Anaerobic Filter ◽  
Ph Values ◽  
Wide Range ◽  
Ammonia Desorption ◽  
Effects Of Ph

Abstract Laboratory studies were conducted to demonstrate the effectiveness of diffused aeration for the removal of ammonia from the effluent of an anaerobic filter treating leachate. The effects of pH, temperature and air flow on the process were studied. The coefficient of desorption of ammonia, KD for the anaerobic filter effluent (TKN 75 mg/L with NH3-N 88%) was determined at pH values of 9, 10 and 11, temperatures of 10, 15, 20, 30 and 35°C, and air flow rates of 50, 120, and 190 cm3/sec/L. Results indicated that nitrogen removal from the effluent of anaerobic filters by ammonia desorption was feasible. Removals exceeding 90% were obtained with 8 hours aeration at pH of 10, a temperature of 20°C, and an air flow rate of 190 cm3/sec/L. Ammonia desorption coefficients, KD, determined at other temperatures and air flow rates can be used to predict ammonia removals under a wide range of operating conditions.

Bioavailability of phosphorus as a tool for efficient P reduction schemes

1998 ◽  
Vol 37 (3) ◽  
pp. 241-247 ◽  
Author(s):  
Peter Gerdes ◽  
Sabine Kunst
Keyword(s):  
Sewage Treatment ◽  
Cost Effective ◽  
Effective Management ◽  
Lower Saxony ◽  
Effective Strategies ◽  
P Balance ◽  
Different Sources ◽  
Total P ◽  
P Sources ◽  
P Bioavailability

The bioavailability of phosphorus from different sources has been evaluated in the catchment area of the River Ilmenau (Lower-Saxony, Germany) by using algal assays. The P bioavailability describes the different potential of P from various sources of supporting eutrophication. Effluents from sewage treatment plants were highly bioavailable (72% of TP) whereas rainwater (26%) and erosion effluents (30%) showed a low bioavailability. In order to develop effective strategies to minimize P inputs into the river, source specific P bioavailability indices were determined and combined with a P balance to calculate inputs of vioavailable P (BAP) instead of total P (TP). It could be shown that the relative importance of the different P sources changes when applying BAP. Measures to reduce P inputs into the River Ilmenau will take P bioavailability into consideration and therefore lead to a more cost-effective management.

scholarly journals Geometrical Optimization of a Venturi-Type Microbubble Generator Using CFD Simulation and Experimental Measurements

Designs ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 4
Author(s):  
Dillon Alexander Wilson ◽  
Kul Pun ◽  
Poo Balan Ganesan ◽  
Faik Hamad
Keyword(s):  
Water Flow ◽  
Flow Rate ◽  
Cfd Simulation ◽  
Air Flow ◽  
Bubble Diameter ◽  
Diameter Ratio ◽  
Experimental Measurements ◽  
Cfd Model ◽  
Flow Rates ◽  
Throat Diameter

Microbubble generators are of considerable importance to a range of scientific fields from use in aquaculture and engineering to medical applications. This is due to the fact the amount of sea life in the water is proportional to the amount of oxygen in it. In this paper, experimental measurements and computational Fluid Dynamics (CFD) simulation are performed for three water flow rates and three with three different air flow rates. The experimental data presented in the paper are used to validate the CFD model. Then, the CFD model is used to study the effect of diverging angle and throat length/throat diameter ratio on the size of the microbubble produced by the Venturi-type microbubble generator. The experimental results showed that increasing water flow rate and reducing the air flow rate produces smaller microbubbles. The prediction from the CFD results indicated that throat length/throat diameter ratio and diffuser divergent angle have a small effect on bubble diameter distribution and average bubble diameter for the range of the throat water velocities used in this study.

149 Evaluation of Hammermill Tip Speed, Air Assist, and Screen Hole Diameter on Ground Corn Characteristics

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 134-135
Author(s):  
Michaela B Braun ◽  
Kara M Dunmire ◽  
Michael Sodak ◽  
Jerry Shepherd ◽  
Randy Fisher ◽  
...  
Keyword(s):  
Particle Size ◽  
Geometric Mean ◽  
Air Flow ◽  
Hole Diameter ◽  
Experimental Unit ◽  
Flow Index ◽  
Air Flow Rate ◽  
Flow Rates ◽  
Composite Flow ◽  
Ground Corn

Abstract This study was performed to evaluate hammermill tip speed, assistive airflow and screen hole diameter on hammermill throughput and characteristics of ground corn. Corn was ground using two Andritz hammermills (Model: 4330–6, Andritz Feed & Biofuel, Muncy,PA) measuring 1-m in diameter each equipped with 72 hammers and 300 HP motors. Treatments were arranged in a 3 × 3 × 3 factorial design with 3 tip speeds (3,774, 4,975, and 6,176 m/min), 3 screen hole diameters (2.3, 3.9 and 6.3 mm), and 3 air flow rates (1,062, 1,416, and 1,770 fan RPM). Corn was ground on 3 separate days to create 3 replications and treatments were randomized within day. Samples were collected and analyzed for moisture, particle size, and flowability characteristics. Data were analyzed using the GLIMMIX procedure of SAS 9.4 with grinding run serving as the experimental unit and day serving as the block. There was a 3-way interaction for standard deviation (Sgw), (linear screen hole diameter × linear hammer tip speed × linear air flow, P = 0.029). There was a screen hole diameter × hammer tip speed interaction (P < 0.001) for geometric mean particle size dgw (P < 0.001) and composite flow index (CFI) (P < 0.001). When tip speed increased from 3,774 to 6,176 m/min the rate of decrease in dgw was greater as screen hole diameter increased from 2.3 to 6.3 mm resulting in a 67, 111, and 254 µm decrease in dgw for corn ground using the 2.3, 3.9, and 6.3 mm screen hole diameter, respectively. For CFI, increasing tip speed decreased the CFI of ground corn when ground using the 3.9 and 6.3 mm screen. However, when grinding corn using the 2.3 mm screen, there was no evidence of difference in CFI when increasing tip speed. In conclusion, the air flow rate did not influence dgw of corn but hammer tip speed and screen size were altered and achieved a range of dgw from 304 to 617 µm.

scholarly journals Modeling and optimization of radish root extract drying as peroxidase source using spouted bed dryer

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shahrbanoo Hamedi ◽  
M. Mehdi Afsahi ◽  
Ali Riahi-Madvar ◽  
Ali Mohebbi
Keyword(s):  
Kinetic Parameters ◽  
Flow Rate ◽  
Air Flow ◽  
Cost Effective ◽  
Industrial Applications ◽  
Interactive Effects ◽  
Root Extract ◽  
Air Flow Rate ◽  
Spouted Bed ◽  
Radish Root

AbstractThe main advantages of the dried enzymes are the lower cost of storage and longer time of preservation for industrial applications. In this study, the spouted bed dryer was utilized for drying the garden radish (Raphanus sativus L.) root extract as a cost-effective source of the peroxidase enzyme. The response surface methodology (RSM) was used to evaluate the individual and interactive effects of main parameters (the inlet air temperature (T) and the ratio of air flow rate to the minimum spouting air flow rate (Q)) on the residual enzyme activity (REA). The maximum REA of 38.7% was obtained at T = 50 °C and Q = 1.4. To investigate the drying effect on the catalytic activity, the optimum reaction conditions (pH and temperature), as well as kinetic parameters, were investigated for the fresh and dried enzyme extracts (FEE and DEE). The obtained results showed that the optimum pH of DEE was decreased by 12.3% compared to FEE, while the optimum temperature of DEE compared to FEE increased by a factor of 85.7%. Moreover, kinetic parameters, thermal-stability, and shelf life of the enzyme were considerably improved after drying by the spouted bed. Overall, the results confirmed that a spouted bed reactor can be used as a promising method for drying heat-sensitive materials such as peroxidase enzyme.

scholarly journals The Design and Realization of Cherry Tomato Harvesting Robot Based on IOT

2016 ◽  
Vol 12 (12) ◽  
pp. 23 ◽  
Author(s):  
Biqing Li ◽  
Yongfa Ling ◽  
Hongyan Zhang ◽  
Shiyong Zheng
Keyword(s):  
Image Recognition ◽  
Recognition Rate ◽  
Control Technology ◽  
Original Image ◽  
Cherry Tomato ◽  
Modular Control ◽  
Breakage Rate ◽  
Harvesting Efficiency ◽  
Technology Processes ◽  
Harvesting Robot

To improve the efficiency of harvesting cherry tomato and reduce its breakage rate, we design a harvesting robot base on image recognition and modular control. After image acquisition with IOT technology, the binary processing and expansion and corrosion processing of original image can effectively increase the fruit recognition rate. In addition, the use of fuzzy control technology processes the response error of manipulator. We test the performance of cherry tomato harvesting robot through harvesting experiment. The experimental results show that the harvesting efficiency significantly improves and the degree of crushing cherry tomato greatly reduces after using the cherry tomato harvesting robot.

Evaluation of pressure coefficients and estimation of air flow rates in buildings employing wind towers

Solar Energy ◽  
1986 ◽  
Vol 37 (5) ◽  
pp. 363-374 ◽  
Author(s):  
C. Karakatsanis ◽  
M.N. Bahadori ◽  
B.J. Vickery
Keyword(s):  
Air Flow ◽  
Flow Rates ◽  
Pressure Coefficients

scholarly journals Genotyping of GATA4 Gene Variant (G296S) in Malaysian Congenital Heart Disease Subjects by Real-Time PCR High Resolution Melting Analysis

2013 ◽  
Vol 32 (2) ◽  
pp. 152-157
Author(s):  
Nora Fawzi ◽  
Ramachandran Vasudevan ◽  
Patimah Ismail ◽  
Mazeni Alwi ◽  
Ahmad Fazli Abdul Aziz ◽  
...  
Keyword(s):  
Congenital Heart Disease ◽  
Heart Disease ◽  
High Resolution ◽  
Congenital Heart ◽  
High Resolution Melting ◽  
New Technology ◽  
Cost Effective ◽  
Study Cohort ◽  
Hrm Analysis ◽  
Melting Analysis

Summary Background: Congenital heart disease (CHD) is the most common birth defect; however, the underlying etiology is unrecognized in the majority of cases. GATA-binding protein 4 (GATA4), a cardiac transcription factor gene, has a crucial role in the cardiogenesis process; hence, a number of heterozygote sequence variations were identified as a cause of CHD. G296S heterozygote variant is the most frequently reported GATA4 gene sequence alteration. This study aims to investigate the role of G296S variant of the GATA4 gene in Malaysian CHD subjects. Methods: We have investigated 86 Malaysian CHD subjects with cardiac septation defects for the presence of the GATA4 gene heterozygote variant (G296S) by the new technology of high resolution melting (HRM) analysis. Results: Genotyping of G296S (c.886G>A) by HRM analysis shows that all the sample genotypes were of the wild GG type genotype and the heterozygote mutant GA genotype was totally absent from this study cohort. Conclusions: The results of our study showed that the G296S variant of the GATA4 gene was not associated with the development of CHD in Malaysian subjects. The use of HRM analysis proved a cost-effective, high-throughput, specific and sensitive genotyping technique which eliminates the need for unnecessary sequencing.

Sign in / Sign up

Export Citation Format

Share Document