Electrochemical oxidation pretreatment of refractory organic pollutants

1997 ◽  
Vol 36 (2-3) ◽  
pp. 123-130 ◽  
Author(s):  
Li-Choung Chiang ◽  
Juu-En Chang ◽  
Shu-Chuan Tseng
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Oxidation Process ◽  
Supporting Electrolyte ◽  
Chloride Concentration ◽  
Gel Permeation Chromatography ◽  
Organic Halogen ◽  
Removal Efficiencies ◽  
Refractory Organic Pollutants ◽  
Microtox Test

Refractory pollutants, including lignin, tannic acid, chlortetracycline, and EDTA, were destroyed by an electrochemical oxidation method to evaluate the applicability of this method for industrial wastewater pretreatment. Operation parameters, such as supporting electrolyte, current density, and electrolyte concentration, have been investigated for their influences on COD removal efficiencies during electrolysis. In addition, gel permeation chromatography (GPC), Microtox test, and total organic halogen (TOX) analyses were performed to monitor the changes of organic characteristics of these refractory pollutants. Experimental results show that, among sulfate, nitrate, and chloride, chloride was the best supporting electrolyte, and during electrolysis, both COD and color removal efficiencies were improved by increasing current density and chloride concentration. From GPC analysis results, the electrochemical oxidation process readily destroys high-molecular-weight (HMW) organics. Microtox test results also show that the process can reduce the toxicity of these refractory organic compounds. In addition, TOX concentrations were found to increase at the beginning but then decline during the electrolysis. The above results suggest that the electrochemical oxidation process, which has good efficacy for detoxification and destruction of refractory pollutants, is a promising method for wastewater pretreatment.

Destruction of refractory humic acid by electromechanical oxidation process

2000 ◽  
Vol 42 (3-4) ◽  
pp. 225-232 ◽  
Author(s):  
L.-C. Chaing ◽  
J.-E. Chang ◽  
T.-Cn. Wen
Keyword(s):  
Humic Acid ◽  
Electrochemical Oxidation ◽  
Humic Substance ◽  
Current Density ◽  
High Efficiency ◽  
Oxidation Process ◽  
Chloride Concentration ◽  
Chloride Ion ◽  
Gel Permeation Chromatography ◽  
Indirect Oxidation

Electrochemical oxidation of humic acid has been conducted to evaluate the efficacy of the process for the destruction of high-molecular-weight (HMW) compounds. Experimental results show that the destruction of humic acid obtained by the electrolysis supported by chloride ion is much better than that obtained by sulfate ion. Accordingly, HMW compound such as humic substance is suggested to be resistant to directly anodic oxidation, but to be readily destroyed by an indirect oxidation of chlorine/hypochlorite during an electrochemical treatment process. The effects of operating parameters, including anode material, current density, electrolyte concentration, have been investigated in this study. A tertiary-oxide of Sn, Pd, Ru coated titanium (SPR) anode with high electrocatalytic activity was found to have high efficiency for humic acid destruction, and the destruction efficacy of humic substance increased with increasing current density and chloride concentration. In this study, gel permeation chromatography (GPC) and adsorptive organic halide (AOX) had been performed to examine the variation of organic characteristics during the electrochemical oxidation of humic acid. The results from GPC and AOX show that HMW organic compounds could be effectively destroyed by electrochemical oxidation process, and the process also produced less undesirable chlorinated byproducts than the chlorination process. From the above results, the electrochemical oxidation conducted by indirect oxidation effect of chlorine/hypochlorite could be concluded to be a feasible method for the destruction of HMW compounds.

Electrochemical Oxidation of Azo Dye Wastewater Using Graphene-Based Electrode Materials

2019 ◽  
Vol 19 (11) ◽  
pp. 7308-7314
Author(s):  
Jinyan Li ◽  
Qingsong Guan ◽  
Junming Hong ◽  
Chang-Tang Chang
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Electrode Materials ◽  
Supporting Electrolyte ◽  
Performance Comparison ◽  
Carbon Cloth ◽  
Reactive Black 5 ◽  
Dye Wastewater ◽  
Composite Electrodes ◽  
Initial Concentration

Composite electrodes with different graphene (GN)/TiO2 ratios and nano-activated carbon electrodes were prepared for electrocatalytic performance comparison. The electrodes were loaded with platinum (Pt) by use of chloroplatinic acid to promote their performance. Reactive Black 5 (RBk5) dye wastewater was treated as a challenging pollutant by use of advanced electrochemical oxidation technology. The composite materials were characterized by Transmission Electron Microscope (TEM), Field Emission Scanning Electron Microscopy (FE-SEM), and Energy Disperse Spectroscopy (EDS). Results showed that the graphene electrode was prepared successfully and verified because all elements were uniformly loaded on the conductive carbon cloth. The effects of several operating parameters including material types, pH, initial concentration of RBk5, and current density on the removal performance of RBk5 were also assessed. The supporting electrolyte was NaCl solution of 1 g L−1. The concentration of RBk5 was detected using an ultraviolet spectrophotometer with a detection wavelength of 600 nm. The optimum parameters of the experiment were GN/TiO2 ratio of 1:4 and pH of 6.6. The removal efficiency of RBk5 could be higher than 95% under an initial concentration of RBk5 of 5 ppm and a current density of 2.5 mA·cm-2 when reaction time was 30 min.

scholarly journals Electrochemical Degradation of Crystal Violet Using Ti/Pt/SnO2 Electrode

2021 ◽  
Vol 11 (18) ◽  
pp. 8401
Author(s):  
Rachid El Brychy ◽  
Mohamed Moutie Rguiti ◽  
Nadia Rhazzane ◽  
Moulay Driss Mellaoui ◽  
Khalid Abbiche ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Crystal Violet ◽  
Current Density ◽  
Ph Value ◽  
Supporting Electrolyte ◽  
Chloride Concentration ◽  
Oxygen Demand ◽  
Electrochemical Treatment ◽  
Electrochemical Process ◽  
Initial Ph

Today, organic wastes (paints, pigments, etc.) are considered to be a major concern for the pollution of aqueous environments. Therefore, it is essential to find new methods to solve this problem. This research was conducted to study the use of electrochemical processes to remove organic pollutants (e.g., crystal violet (CV)) from aqueous solutions. The galvanostatic electrolysis of CV by the use of Ti/Pt/SnO2 anode, were conducted in an electrochemical cell with 100 mL of solution using Na2SO4 and NaCl as supporting electrolyte, the effect of the important electrochemical parameters: current density (20–60 mA cm−2), CV concentration (10–50 mg L−1), sodium chloride concentration (0.01–0.1 g L−1) and initial pH (2 to 10) on the efficiency of the electrochemical process was evaluated and optimized. The electrochemical treatment process of CV was monitored by the UV-visible spectrometry and the chemical oxygen demand (COD). After only 120 min, in a 0.01mol L−1 NaCl solution with a current density of 50 mA cm−2 and a pH value of 7 containing 10 mg L−1 CV, the CV removal efficiency can reach 100%, the COD removal efficiency is up to 80%. The process can therefore be considered as a suitable process for removing CV from coloured wastewater in the textile industries.

Hydroquinone Wastewater Treatment by Means of Electrochemical Oxidation in Three-Dimensional Bipolar Cell

2012 ◽  
Vol 518-523 ◽  
pp. 2539-2542 ◽  
Author(s):  
Jun Sheng Hu ◽  
Jia Li Dong ◽  
Ying Wang ◽  
Lei Guan ◽  
Ying Yong Duan
Keyword(s):  
Electrochemical Oxidation ◽  
Oxidation Process ◽  
Electrolyte Concentration ◽  
Ph Value ◽  
Removal Rate ◽  
Supporting Electrolyte ◽  
Three Dimensional ◽  
Initial Ph ◽  
Single Factor Analysis ◽  
Dimensional Cell

By the static experiment, we studied the electrochemical oxidation process of simulated hydroquinone wastewater (concentration for 300mg•L-1) in the three-dimensional cell. Experimental inspected how various factors of the packing quality ratio, electrolysis voltage, supporting electrolyte concentration, and the initial pH value influence the effect of the removal of hydroquinone and CODCr. The results of the experiment clearly indicated with the increase of voltage applied the removal rate of hydroquinone and CODCr increased first and then decreased, finally and increased again. In the weak alkali conditions (pH=8.5), the removal rate of hydroquinone and CODCr is the highest, Electrolyte concentration and packing quality ratio to the effect of hydroquinone by electrochemical degradation is the larger. The results of the single factor analysis show that the most suitable processing conditions of simulated hydroquinone wastewater by bipolar electrocatalysis oxidation are the Na2SO4 concentration of 0.03mol•L-1, the electrolytic voltage of 6V, the initial pH value of 8.5, the packing quality ratio of 1:2. With this condition processing 3h, the removal rate of hydroquinone and CODCr reached 83.96% and 39.9%, respectively.

The electrochemical degradation of the metronidazole (MNZ) antibiotic using electrochemical oxidation on a stainless steel316 coated with beta lead oxide (SS316/β-PbO2) anode

2020 ◽  
Vol 18 (4) ◽  
Author(s):  
Sommayeh Saadi ◽  
Parisa Mahmoudpoor Moteshaker ◽  
Seyed Ehsan Rokni ◽  
Ghobad Ahmadidoust ◽  
Narges Farnoodian ◽  
...  
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Lead Oxide ◽  
Supporting Electrolyte ◽  
Pharmaceutical Products ◽  
Electrochemical Process ◽  
Electrochemical Degradation ◽  
Effective Parameters ◽  
Electro Deposition ◽  
X Ray

AbstractMetronidazole (MNZ) is one of the pharmaceutical products which is considered as one of the most important pollutants in the environment due to its wide use and resistance to biodegradation. Hence, the purpose of this study is the optimization of the electrochemical degradation of the metronidazole (MNZ) antibiotic using electrochemical oxidation on a stainless steel316 coated with beta lead oxide (SS316/β-PbO2) anode. In the studied electrochemical process, the response surface methodology (RSM) involving a five-level ((pH (A) and electrolysis time (B), current density (C), and MNZ concentration (D)). The central composite design (CCD) was employed for optimizing and modeling of the electrochemical process in the degradation of MNZ. The preparation of SS316/β-PbO2 anode was accomplished using the electro-deposition method. Scanning electron microscope (SEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD) analyses were conducted for accurate evaluation and characterization of the coated electrode. The effect of influencing factors on electrochemical degradation of MNZ was studied, and the highest MNZ degradation efficiency was observed to be 98.88% after 120 min under the optimal conditions including the supporting electrolyte concentration of 1.0 g/100 cc, the initial MNZ concentration of 30.1 mg/L, pH of 4 and the current density of 9.99 mA/cm2. The linear regression coefficient (R2) between experiments and different response values in the model was 0.99. Moreover, the statistical analysis of the results indicated that in the range studied, the most effective parameters in MNZ degradation are MNZ concentration and pH. In general, it can be concluded that the electrochemical process using SS316/β-PbO2 anode can effectively eliminate metronidazole, and it can be considered as an efficient method in the degradation of various pollutants.

A Dual Cathode Electro Fe2+/S2O82- System Used for Pickle Sauerkraut Wastewater Degradation

2014 ◽  
Vol 1073-1076 ◽  
pp. 924-928
Author(s):  
Shu Yun Shi ◽  
Hong Hui Teng
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Treatment Effect ◽  
Oxidation Process ◽  
Removal Rate ◽  
Cod Removal ◽  
Test Results ◽  
Effect Test ◽  
Plate Distance ◽  
Electrode Plate

Using novel dual cathode/electro/Fe2+/S2O82-system to treat pickle sauerkraut wastewater, the paper investigates the influencing factors (S2O82-dosage, Fe2 +dosage, current density, Wastewater pH, electrode plate distance) of the organic matters removal and the treatment effect. Test results show that the degree of various factors influence on COD removal of sauerkraut wastewater is different. The COD removal is little effected by pH, while largely effected by current density, dosage of Fe2 +and S2O82-dosage. Under the optimum experiment conditions, current density for 30mA/cm-2, dosage of Fe2 +for 8mmol/L, S2O82-dosage for 12 mmol/L, electrode plate distance for 2 cm and pH=6, sixty minutes electrolysis, wastewater removal rate reach up to 92.6%. These results suggest that this electrochemical oxidation process by dual cathode/electro-Fe2+-S2O82-system might provide an alternative for the degradation of pickle sauerkraut wastewater.

scholarly journals Application of Taguchi’s experimental design method for optimization of Acid Red 18 removal by electrochemical oxidation process

2018 ◽  
Vol 5 (4) ◽  
pp. 241-248 ◽  
Author(s):  
Zabihollah Yousefi ◽  
Ali Zafarzadeh ◽  
Abdolaziz Ghezel
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Oxidation Process ◽  
Design Method ◽  
Oxygen Demand ◽  
Pollutant Removal ◽  
Fractional Factorial ◽  
Synthetic Wastewater ◽  
Electro Oxidation ◽  
Electro Coagulation

Background: Electro-oxidation is developed as an electrochemical method to overcome the problems of the conventional decolorization technologies and is an appropriate alternative for the treatment of colored wastewater from various industries. The purpose of this study was to evaluate the efficiency of the electrochemical oxidation process in removal of chemical oxygen demand (COD) and Acid Red 18 (AR18) dye from aqueous solutions. Methods: In this research, a laboratory scale of electro-coagulation reactor for the treatment of synthetic wastewater was made and studied. The effects of different variables including pH, current density, dye concentration, and electrolysis time were investigated. The experiment steps were designed by DesignExpert 10 software using the selected variables. Finally, the dye and COD analysis was performed by spectrophotometer. The optimization was performed using Taguchi fractional factorial design during the removal of dye and COD. Results: Maximum removal of dye (89%) and COD (72.2%) were obtained at pH=3, current density=20 mA/cm2 , initial dye concentration=100 mg/L, and reaction time=45 min. ANOVA test showed a significant relationship between statistical model and test data. Also, the results indicate that the distribution of the residues of the model was normal. Conclusion: By designing experiments through Taguchi method, the removal process will be optimized and by decreasing the number of experiments, the optimal conditions for pollutant removal will be prepared. The results suggest that the Electro-oxidation system is a very suitable technique for the enhancement of wastewater treatment.

scholarly journals Ecotoxicological Evaluation of Methiocarb Electrochemical Oxidation

2020 ◽  
Vol 10 (21) ◽  
pp. 7435
Author(s):  
Annabel Fernandes ◽  
Christopher Pereira ◽  
Susana Coelho ◽  
Celso Ferraz ◽  
Ana C. Sousa ◽  
...  
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Removal Rate ◽  
Supporting Electrolyte ◽  
Ecological Effects ◽  
Applied Current ◽  
Boron Doped Diamond ◽  
Experimental Conditions ◽  
Applied Current Density ◽  
Toxicity Reduction

The ecotoxicity of methiocarb aqueous solutions treated by electrochemical oxidation was evaluated utilizing the model organism Daphnia magna. The electrodegradation experiments were performed using a boron-doped diamond anode and the influence of the applied current density and the supporting electrolyte (NaCl or Na2SO4) on methiocarb degradation and toxicity reduction were assessed. Electrooxidation treatment presented a remarkable efficiency in methiocarb complete degradation and a high potential for reducing the undesirable ecological effects of this priority substance. The reaction rate followed first-order kinetics in both electrolytes, being more favorable in a chloride medium. In fact, the presence of chloride increased the methiocarb removal rate and toxicity reduction and favored nitrogen removal. A 200× reduction in the acute toxicity towards D. magna, from 370.9 to 1.6 toxic units, was observed for the solutions prepared with NaCl after 5 h treatment at 100 A m−2. An increase in the applied current density led to an increase in toxicity towards D. magna of the treated solutions. At optimized experimental conditions, electrooxidation offers a suitable solution for the treatment and elimination of undesirable ecological effects of methiocarb contaminated industrial or agricultural wastewaters, ensuring that this highly hazardous pesticide is not transferred to the aquatic environment.

Electrochemical degradation of 4-chlorophenol in aqueous solution using modified PbO2 anode

2012 ◽  
Vol 66 (11) ◽  
pp. 2468-2474 ◽  
Author(s):  
X. Y. Duan ◽  
F. Ma ◽  
L. M. Chang
Keyword(s):  
Aqueous Solution ◽  
Electrochemical Oxidation ◽  
Current Density ◽  
Supporting Electrolyte ◽  
Positive Influence ◽  
Applied Current ◽  
Applied Current Density ◽  
Toc Removal ◽  
First Order Kinetics ◽  
Pbo2 Electrode

The electrochemical oxidation of 4-chlorophenol (4-CP) in aqueous solution was studied by electrochemical oxidation using modified PbO2 electrode as anode. The influence of several operating parameters, such as initial 4-CP concentration, applied current density, and supporting electrolyte (Na2SO4) concentration was investigated. Ultraviolet spectroscopy and total organic carbon (TOC) measurements were conducted to study the kinetics of 4-CP electrochemical reaction and the mineralization efficiency of 4-CP. The experimental results showed that the 4-CP degradation always followed a pseudo-first-order kinetics. The higher mineralization of 4-CP and the lower current efficiency (CE) were obtained by the lower initial 4-CP concentration. The applied current density showed a positive influence on the degradation of 4-CP and the removal of TOC, but a higher applied current density led to a lower CE. Although Na2SO4 concentration of 0.05 M resulted in a higher 4-CP and TOC removal, the result of one-way analysis of variance (ANOVA) indicates that Na2SO4 concentration is not the significant parameter for 4-CP removal in electrochemical oxidation.

Sign in / Sign up

Export Citation Format

Share Document