scholarly journals Fluoride ion adsorption from wastewater using magnesium(II), aluminum(III) and titanium(IV) modified natural zeolite: kinetics, thermodynamics, and mechanistic aspects of adsorption

2017 ◽  
Vol 8 (4) ◽  
pp. 479-489 ◽  
Author(s):  
Zhijun Ma ◽  
Qi Zhang ◽  
Xingyuan Weng ◽  
Changye Mang ◽  
Liwei Si ◽  
...  
Keyword(s):  
Natural Zeolite ◽  
Adsorption Process ◽  
Fluoride Ion ◽  
Ion Adsorption ◽  
Order Model ◽  
Fluoride Ions ◽  
Modified Zeolite ◽  
Fluoride Adsorption ◽  
Pseudo Second Order ◽  
Modified Zeolites

Abstract Natural zeolite was modified using metal ions, including magnesium(II), aluminum(III) and titanium(IV). The modified zeolite was then used as an adsorbent for the investigation of the adsorption kinetics, isotherms, and thermodynamic parameters of fluoride ions in wastewater at various pHs and temperatures. The kinetics and thermodynamics for the removal of the fluoride ions onto the modified zeolite have also been investigated. The fluoride ion adsorption capacity of the three types of modified zeolites exhibited an increase, then decrease, with rising pH. The fluoride adsorption capacity of the modified zeolites decreased with an increase in temperature. The pseudo-second-order model is more suitable for describing the adsorption kinetic data than the pseudo-first-order model for modified zeolite and the adsorption process of the fluoride ions reveals pseudo-second-order kinetic behavior, respectively. It was found that the adsorption equilibrium data fit the Freundlich isothermal equation better than that of the Langmuir isothermal and Dubinin–Radushkevich (D–R) isothermal equations. Thermodynamic analysis suggests that the negative values of ΔG0 and ΔH0 further indicate that the fluoride adsorption process is both spontaneous and exothermic. The results of competitive adsorption tests suggest that the modified metal zeolite materials adsorb fluoride ions with high selectivity.

scholarly journals Bisphenol A Removal by Adsorption Using Waste Biomass: Isotherm and Kinetic Studies

2020 ◽  
Vol 11 (1) ◽  
pp. 8467-8481
Keyword(s):  
Binding Sites ◽  
Adsorption Process ◽  
Agricultural Waste ◽  
Kinetic Studies ◽  
Ion Adsorption ◽  
Waste Biomass ◽  
Order Model ◽  
Emerging Pollutant ◽  
Pseudo Second Order ◽  
And Function

BPA is categorized as a new emerging pollutant that mimics the structure and function of hormone estrogen for humans and animals. The removal of BPA had been concerned because human exposure toward BPA is widespread, and it is harmful to humans and the ecosystem. The aim of the study was to remove BPA by adsorption technique and understand the application of agricultural waste material as potential adsorbent. The increasing of the surface area of post-adsorption from 4.80 m2/g to 5.83 m2/g indicated that the sulphuric acid treatment responsible for the growth in the porosity of the banana bunches, increase the number of available binding sites and its ion-adsorption capacity. The highest removal of BPA by the banana bunch and coconut bunch was obtained in the following condition: the temperature at 25°, pH 3, dosage at 100 mg, and agitation at 150rpm. The adsorption process was well described with the Langmuir isotherm, while the best correlation with the kinetic study of BPA adsorption was the pseudo-second-order model. The negative values of ΔH° suggested that the adsorption of BPA onto banana bunch (-13.748 J mol−1) and coconut bunch (-5693.67 J mol−1) is exothermic in nature.

scholarly journals Eggshell Powder as an Adsorbent for Removal of Fluoride from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Studies

2012 ◽  
Vol 9 (3) ◽  
pp. 1457-1480 ◽  
Author(s):  
R. Bhaumik ◽  
N. K. Mondal ◽  
B. Das ◽  
P. Roy ◽  
K. C. Pal ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Fluoride Removal ◽  
Contaminated Water ◽  
Fluoride Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Maximum Removal

A new medium, eggshell powder has been developed for fluoride removal from aqueous solution. Fluoride adsorption was studied in a batch system where adsorption was found to be pH dependent with maximum removal efficiency at 6.0. The experimental data was more satisfactorily fitted with Langmuir isotherm model. The kinetics and the factor controlling adsorption process fully accepted by pseudo-second-order model were also discussed. Eawas found to be 45.98 kJmol-1by using Arrhenius equation, indicating chemisorption nature of fluoride onto eggshell powder. Thermodynamic study showed spontaneous nature and feasibility of the adsorption process with negative enthalpy (∆H0) value also supported the exothermic nature. Batch experiments were performed to study the applicability of the adsorbent by using fluoride contaminated water collected from affected areas. These results indicate that eggshell powder can be used as an effective, low-cost adsorbent to remove fluoride from aqueous solution as well as groundwater.

Study on the Formaldehyde Adsorption Kinetics of Dry Waters

2014 ◽  
Vol 809-810 ◽  
pp. 907-911
Author(s):  
Jun Long Wang ◽  
Jie Hou ◽  
Ting Jiang ◽  
Yong Jun He ◽  
Yao Dong Liang
Keyword(s):  
Adsorption Kinetics ◽  
High Speed ◽  
Adsorption Process ◽  
Average Diameter ◽  
Adsorption Rate ◽  
Absorption Kinetics ◽  
Order Model ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Formaldehyde Adsorption

Dry waters with an average diameter of 82 μm were prepared by a high speed mixed route. The formaldehyde absorption kinetics of dry waters was investigated by simulating indoor formaldehyde pollution in glass chamber. The results showed that pseudo-second order model could be used to simulate the adsorption process; the adsorption rate was highest in the initial 60 minutes; when the adsorption lasted for 180 minutes, the adsorption reached equilibrium.

scholarly journals Water defluoridation by alumina modified Turkey clinoptilolite: equilibrium, kinetic models and experimental design approaches

2017 ◽  
Vol 18 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Selim Selimoglu ◽  
Esra Bilgin Simsek ◽  
Ulker Beker
Keyword(s):  
Natural Zeolite ◽  
Kinetic Studies ◽  
Order Reaction ◽  
Operating Conditions ◽  
Second Order Reaction ◽  
Freundlich Model ◽  
Box Behnken Design ◽  
Fluoride Adsorption ◽  
Exothermic Process ◽  
Pseudo Second Order

Abstract In the current work, alumina modified natural zeolite (Z-Al) was used for fluoride adsorption in aqueous solution. Effects of process parameters such as pH, temperature, initial concentration and contact time were investigated. Box–Behnken design was found effective in defining the operating conditions for fluoride sorption onto Z-Al. Confirmatory experiments were conducted to examine the reliability of the regression equation. The predicted (2.261 mg g−1) and experimental (2.289 mg g−1) capacities were found to be similar, demonstrating the accuracy of the model. The fluoride adsorption onto Z-Al was well described by the Freundlich model. Kinetic studies revealed that the adsorption followed a pseudo-second-order reaction. Thermodynamic parameters depicted that the fluoride adsorption on the alumina modified zeolite was a spontaneous and exothermic process. The co-existing ions affected the defluoridation performance significantly. Regeneration of exhausted Z-Al was achieved with H2SO4.

scholarly journals ADSORPTION AND KINETIC STUDIES OF A NATURAL DYE FROM CURCUMA LONGA L., ONTO BAMBOO YARN

2017 ◽  
Vol 2 (1) ◽  
pp. 13-26
Author(s):  
Tengku Khamanur Azma Tg. Mohd Zamri ◽  
Mimi Sakinah Abd Munaim ◽  
Zularisam Ab Wahid
Keyword(s):  
Adsorption Process ◽  
Regression Coefficient ◽  
Curcuma Longa ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Natural Dye ◽  
Isotherm Models ◽  
Order Model ◽  
Dyeing Process ◽  
Pseudo Second Order

Natural dye extracted from the rhizome of Curcuma longa L. were applied to bamboo yarns using exhaustion dyeing process. This study investigates the dyeing behaviour of Curcumin; the major color component isolated from rhizomes of Curcuma longa L.on bamboo yarn. Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich isotherm models were used to test the adsorption process of curcumin on bamboo yarn. Comparison of regression coefficient value indicated that the Freundlich isotherm most fitted to the adsorption of curcumin onto bamboo yarn. Furthermore, the kinetics study on this research fitted the pseudo-second order model which indicates that the basis of interaction was chemical adsorption.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

scholarly journals Synthesis Fe3O4/Talc nanocomposite by coprecipition-ultrasonication method and advances in hexavalent chromium removal from aqueous solution

2020 ◽  
Vol 38 (9-10) ◽  
pp. 483-501
Author(s):  
Nguyen Thi Huong ◽  
Nguyen Ngoc Son ◽  
Vo Hoang Phuong ◽  
Cong Tien Dung ◽  
Pham Thi Mai Huong ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Batch Experiments ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Langmuir And Freundlich Equations

The Fe3O4/Talc nanocomposite was synthesized by the coprecipitation-ultrasonication method. The reaction was carried out under a inert gas environment. The nanoparticles were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), fourier-transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry techniques (VSM), the surface area of the nanoparticles was determined to be 77.92 m2/g by Brunauer-Emmett-Teller method (BET). The kinetic data showed that the adsorption process fitted with the pseudo-second order model. Batch experiments were carried out to determine the adsorption kinetics and mechanisms of Cr(VI) by Fe3O4/Talc nanocomposite. The adsorption process was found to be highly pH-dependent, which made the material selectively adsorb these metals from aqueous solution. The isotherms of adsorption were also studied using Langmuir and Freundlich equations in linear forms. It is found that the Langmuir equation showed better linear correlation with the experimental data than the Freundlich. The thermodynamics of Cr(VI) adsorption onto the Fe3O4/Talc nanocomposite indicated that the adsorption was exothermic. The reusability study has proven that Fe3O4/Talc nanocomposite can be employed as a low-cost and easy to separate.

Preparation of bio-based magnetic adsorbent and application for efficient removal of Cd(II) from water

2018 ◽  
Vol 77 (5) ◽  
pp. 1313-1323 ◽  
Author(s):  
Jianjun Zhou ◽  
Xionghui Ji ◽  
Xiaohui Zhou ◽  
Jialin Ren ◽  
Yaochi Liu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Order Model ◽  
Efficient Removal ◽  
Adsorption Ability ◽  
Adsorption Sites ◽  
Pseudo Second Order

Abstract A novel magnetic bio-adsorbent (MCIA) was developed, characterized and tested for its Cd(II) removal from aqueous solution. MCIA could be easily separated from the solution after equilibrium adsorption due to its super-paramagnetic property. The functional and magnetic bio-material was an attractive adsorbent for the removal of Cd(II) from aqueous solution owing to the abundant adsorption sites, amino-group and oxygen-containing groups on the surface of Cyclosorus interruptus. The experimental results indicated that the MCIA exhibited excellent adsorption ability and the adsorption process was spontaneous and endothermic. The adsorption isotherm was consistent with the Langmuir model. The adsorption kinetic fitted the pseudo-second-order model very well. The maximum adsorption capacity of Cd(II) onto MCIA was 40.8, 49.4, 54.6 and 56.6 mg/g at 293, 303, 313 and 323 K, respectively. And the MCIA exhibited an excellent reusability and impressive regeneration. Therefore, MCIA could serve as a sustainable, efficient and low-cost magnetic adsorbent for Cd(II) removal from aqueous solution.

scholarly journals Recovery of phosphate from aqueous solution by magnetically recycled modified polishing powder composites

2019 ◽  
Vol 80 (7) ◽  
pp. 1357-1366
Author(s):  
Jianming Liu ◽  
Runying Bai ◽  
Junfeng Hao ◽  
Bowen Song ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Ligand Exchange ◽  
Adsorption Process ◽  
High Adsorption ◽  
Order Model ◽  
Powder Composites ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ph Level ◽  
Adsorption Desorption

Abstract This study investigated a magnetically recycled modified polishing powder (CMIO@PP) as an adsorbent of phosphate; the CMIO@PP was synthesized by combining the modified La/Ce-containing waste polishing powder with CaO2-modified Fe3O4 (CMIO). Results indicate that the CMIO@PP nanocomposite presents a crystal structure comprising La (OH)3, Ce (OH)3, and Fe3O4, and that CMIO is uniformly dispersed in the modified polishing powder. The CMIO@PP (1:3) is a suitable choice considering its magnetism and adsorption capacity. The magnetic adsorbent exhibits a high adsorption capacity of 53.72 mg/g, a short equilibrium time of 60 min, and superior selectivity for phosphate. Moreover, the adsorbent strongly depends on the pH during the adsorption process and maintains a large adsorption capacity when the pH level is between 2 and 6. The adsorption of phosphate by the CMIO@PP (1:3) accords with the Langmuir isotherm model, and the adsorption process follows the pseudo-second order model. Meanwhile, adsorption–desorption experiments show that the adsorbent could be recycled a few times and that a high removal efficiency of phosphate from civil wastewater was achieved. Finally, mechanisms show that the adsorption of phosphate by the CMIO@PP (1:3) is mainly caused by electrostatic attraction and ligand exchange.

scholarly journals Application of Biochar to the Remediation of Pb-Contaminated Solutions

2018 ◽  
Vol 10 (12) ◽  
pp. 4440 ◽  
Author(s):  
Maria Boni ◽  
Agostina Chiavola ◽  
Simone Marzeddu
Keyword(s):  
Adsorption Process ◽  
Chemical Characterization ◽  
Complete Removal ◽  
Order Model ◽  
Equilibrium Conditions ◽  
Sem Images ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Physical And Chemical

BIOTON® biochar, produced by a wood biomass pyrolysis process, which is usually applied as soil amendment, was investigated for a novel application, i.e., the adsorption of lead from contaminated solutions. The experimental activity included physical and chemical characterization of BIOTON®; and Scanning Electron Microscope (SEM) images to highlight its internal structure. The adsorption process was investigated through batch and column experiments. Adsorption kinetics showed very rapid achievement of equilibrium conditions, i.e., 50 mg/L and 100 mg/L initial Pb concentration at 2 h and 4 h, respectively. Complete removal also occurred within the same time. The Brunauer–Emmett–Teller model was a better fit for the equilibrium data of both Pb concentrations, whereas the kinetics were best represented by the pseudo second-order model. Column tests showed that the addition of biochar as an adsorbent media within the bed significantly extended the time of breakthrough and exhaustion, with respect to the column filled with soil only. The values found for the adsorption capacity of BIOTON®- versus lead-containing solutions were comparable to those reported for commercial adsorbents. Therefore, BIOTON® can be considered a valid option: It also offers the additional benefit of allowing the recovery of a residue, which alternately would need to be disposed of.

Sign in / Sign up

Export Citation Format

Share Document