scholarly journals A GIS methodology for the analysis of weather radar precipitation data

2003 ◽  
Vol 5 (2) ◽  
pp. 113-126 ◽  
Author(s):  
M. A. Gad ◽  
I. K. Tsanis

A GIS multi-component module was developed within the ArcView GIS environment for processing and analysing weather radar precipitation data. The module is capable of: (a) reading geo-reference radar data and comparing it with rain-gauge network data, (b) estimating the kinematics of rainfall patterns, such as the storm speed and direction, and (c) accumulating radar-derived rainfall depths. By bringing the spatial capabilities of GIS to bear this module can accurately locate rainfall on the ground and can overlay the animated storm on different geographical features of the study area, making the exploration of the storm's kinematic characteristics obtained from radar data relatively simple. A case study in the City of Hamilton in Ontario, Canada is used to demonstrate the functionality of the module. Radar comparison with rain gauge data revealed an underestimation of the classical Marshal & Palmer Z–R relation to rainfall rate.

2019 ◽  
Vol 21 (4) ◽  
pp. 652-670 ◽  
Author(s):  
Jennifer Kreklow

Abstract A review of existing tools for radar data processing revealed a lack of open source software for automated processing, assessment and analysis of weather radar composites. The ArcGIS-compatible Python package radproc attempts to reduce this gap. Radproc provides an automated raw data processing workflow for nationwide, freely available German weather radar climatology (RADKLIM) and operational (RADOLAN) composite products. Raw data are converted into a uniform HDF5 file structure used by radproc's analysis and data quality assessment functions. This enables transferability of the developed analysis and export functionality to other gridded or point-scale precipitation data. Thus, radproc can be extended by additional import routines to support any other German or non-German precipitation dataset. Analysis methods include temporal aggregations, detection of heavy rainfall and an automated processing of rain gauge point data into the same HDF5 format for comparison to gridded radar data. A set of functions for data exchange with ArcGIS allows for visualisation and further geospatial analysis. The application on a 17-year time series of hourly RADKLIM data showed that radproc greatly facilitates radar data processing and analysis by avoiding manual programming work and helps to lower the barrier for non-specialists to work with these novel radar climatology datasets.


2021 ◽  
Author(s):  
Francesco Marra ◽  
Moshe Armon ◽  
Efrat Morin

Abstract. The yearly exceedance probability of extreme precipitation of multiple durations is crucial for infrastructure design, risk management and policymaking. Local extremes emerge from the interaction of weather systems with local terrain features such as coastlines and orography, however multi-duration extremes do not follow exactly the patterns of cumulative precipitation and are still not well understood. High-resolution information from weather radars could help us better quantifying their patterns, but traditional extreme-value analyses based on radar records were found too inaccurate for quantifying the extreme intensities for impact studies. Here, we propose a novel methodology for extreme precipitation frequency analysis based on relatively short weather radar records, and we use it to investigate coastal and orographic effects on extreme precipitation of durations between 10 minutes and 24 hours. Combining 11 years of radar data with 10-minute rain gauge data in the southeastern Mediterranean, we obtain estimates of the 1 in 100 years intensities with ~22 % standard error, which is lower than those obtained using traditional approaches on rain gauge data. We identify three distinct regimes, which respond differently to coastal and orographic forcing: short durations (~10 minutes), related to peak convective rain rates; hourly durations (~1 hours), related to the yield of individual convective cells; and long durations (~6–24 hours), related to the accumulation of multiple convective cells and to stratiform processes. At short and hourly durations, extreme return levels peak at the coastline, while at longer durations they peak corresponding to the orographic barriers. The distributions tail heaviness is rather uniform above the sea and rapidly changes in presence of orography, with opposing directions at short (decreasing tail heaviness, with a peak at hourly durations) and long (increasing) durations. These distinct effects suggest that short-scale hazards such as urban pluvial floods could be more of concern for the coastal regions, while longer-scale hazards such as flash floods could be more relevant in mountainous areas.


2020 ◽  
Vol 59 (12) ◽  
pp. 2129-2148
Author(s):  
Jingjing Dou ◽  
Robert Bornstein ◽  
Shiguang Miao ◽  
Jianning Sun ◽  
Yizhou Zhang

AbstractThe aim of this study was the analysis and simulation of the life cycle of a bifurcating thunderstorm that passed over Beijing, China, on 22 July 2015. Data from 150 surface weather sites and an S-band radar were used in conjunction with WRF simulations that used its multilevel Building Environment Parameterization (BEP) urbanization option. The Urban-case simulation used Beijing land-use information, and the NoUrban one replaced all urban areas by croplands. The Urban case correctly simulated both the observed weak 10-m winds over Beijing (<1.0 m s−1) and the weak 2-m urban heat island (<0.5°C). Observed radar and rain gauge data, as well as the Urban-case results, all showed precipitation bifurcation around Beijing, with maximum accumulations in convergent flow areas on either side of the city. The Urban case also reproduced the observed precipitation minima over the urban area and in a downwind rain shadow. The observations and Urban-case results both also showed bifurcated flow, even when the storm was still upwind of Beijing. The subsequent bifurcated precipitation areas thus each moved along a preexisting flow branch. Urban-case vertical sections showed downward motion in the divergence areas over the urban core and upward motions over the lateral convergence zones, both up to 6 km. Given that the NoUrban case showed none of these features, these differences demonstrate how the impact of cities can extend upward into deep local convection. Additional case-study simulations are needed to more fully understand urban storm bifurcation mechanisms in this and other storms for cities in a variety of climates.


2013 ◽  
Vol 68 (6) ◽  
pp. 1293-1299 ◽  
Author(s):  
Malte Ahm ◽  
Søren Thorndahl ◽  
Michael R. Rasmussen ◽  
Lene Bassø

This paper presents a method for estimating runoff coefficients of urban drainage subcatchments based on a combination of high resolution weather radar data and flow measurements from a downstream runoff sensor. By utilising the spatial variability of the precipitation it is possible to estimate the runoff coefficients of the separate subcatchments. The method is demonstrated through a case study of an urban drainage catchment (678 ha) located in the city of Aarhus, Denmark. The study has proven that it is possible to use corresponding measurements of the relative rainfall distribution over the catchment and downstream runoff measurements to identify the runoff coefficients at subcatchment level.


2005 ◽  
Vol 2 ◽  
pp. 93-95
Author(s):  
F. Cuccoli ◽  
L. Facheris ◽  
D. Giuli ◽  
M. Casamaggi

Abstract. This paper describes and comments the results obtained applying a data processing method to a joint set of radar and a rain gauge data for estimating the 2-D rainfall field at ground averaged over a given observation time T and over a radar coverage area that includes a rain gauge network. The estimate of the rainfall field is based on the processing of a data set composed by rain gauge and horizontal reflectivity radar data gathered during a rainfall phenomenon. The procedure has been tested on an experimental data set collected in Tuscany in 1999.


2021 ◽  
Vol 16 (4) ◽  
pp. 786-793
Author(s):  
Yoshiaki Hayashi ◽  
Taichi Tebakari ◽  
Akihiro Hashimoto ◽  
◽  

This paper presents a case study comparing the latest algorithm version of Global Satellite Mapping of Precipitation (GSMaP) data with C-band and X-band Multi-Parameter (MP) radar as high-resolution rainfall data in terms of localized heavy rainfall events. The study also obliged us to clarify the spatial and temporal resolution of GSMaP data using high-accuracy ground-based radar, and evaluate the performance and reporting frequency of GSMaP satellites. The GSMaP_Gauge_RNL data with less than 70 mm/day of daily rainfall was similar to the data of both radars, but the GSMaP_Gauge_RNL data with over 70 mm/day of daily rainfall was not, and the calibration by rain-gauge data was poor. Furthermore, both direct/indirect observations by the Global Precipitation Measurement/Microwave Imager (GPM/GMI) and the frequency thereof (once or twice) significantly affected the difference between GPM/GMI data and C-band radar data when the daily rainfall was less than 70 mm/day and the hourly rainfall was less than 20 mm/h. Therefore, it is difficult for GSMaP_Gauge to accurately estimate localized heavy rainfall with high-density particle precipitation.


2009 ◽  
Vol 2009 ◽  
pp. 1-13 ◽  
Author(s):  
B. Decharme ◽  
C. Ottlé ◽  
S. Saux-Picart ◽  
N. Boulain ◽  
B. Cappelaere ◽  
...  

Land-atmosphere feedbacks, which are particularly important over the Sahel during the West African Monsoon (WAM), partly depend on a large range of processes linked to the land surface hydrology and the vegetation heterogeneities. This study focuses on the evaluation of a new land surface hydrology within the Noah-WRF land-atmosphere-coupled mesoscale model over the Sahel. This new hydrology explicitly takes account for the Dunne runoff using topographic information, the Horton runoff using a Green-Ampt approximation, and land surface heterogeneities. The previous and new versions of Noah-WRF are compared against a unique observation dataset located over the Dantiandou Kori (Niger). This dataset includes dense rain gauge network, surfaces temperatures estimated from MSG/SEVIRI data, surface soil moisture mapping based on ASAR/ENVISAT C-band radar data and in situ observations of surface atmospheric and land surface energy budget variables. Generally, the WAM is reasonably reproduced by Noah-WRF even if some limitations appear throughout the comparison between simulations and observations. An appreciable improvement of the model results is also found when the new hydrology is used. This fact seems to emphasize the relative importance of the representation of the land surface hydrological processes on the WAM simulated by Noah-WRF over the Sahel.


2020 ◽  
Vol 12 (11) ◽  
pp. 1709 ◽  
Author(s):  
Anna Jurczyk ◽  
Jan Szturc ◽  
Irena Otop ◽  
Katarzyna Ośródka ◽  
Piotr Struzik

A quantitative precipitation estimate (QPE) provides basic information for the modelling of many kinds of hydro-meteorological processes, e.g., as input to rainfall-runoff models for flash flood forecasting. Weather radar observations are crucial in order to meet the requirements, because of their very high temporal and spatial resolution. Other sources of precipitation data, such as telemetric rain gauges and satellite observations, are also included in the QPE. All of the used data are characterized by different temporal and spatial error structures. Therefore, a combination of the data should be based on quality information quantitatively determined for each input to take advantage of a particular source of precipitation measurement. The presented work on multi-source QPE, being implemented as the RainGRS system, has been carried out in the Polish national meteorological and hydrological service for new nowcasting and hydrological platforms in Poland. For each of the three data sources, different quality algorithms have been designed: (i) rain gauge data is quality controlled and, on this basis, spatial interpolation and estimation of quality field is performed, (ii) radar data are quality controlled by RADVOL-QC software that corrects errors identified in the data and characterizes its final quality, (iii) NWC SAF (Satellite Application Facility on support to Nowcasting and Very Short Range Forecasting) products for both visible and infrared channels are combined and the relevant quality field is determined from empirical relationships that are based on analyses of the product performance. Subsequently, the quality-based QPE is generated with a 1-km spatial resolution every 10 minutes (corresponding to radar data). The basis for the combination is a conditional merging technique that is enhanced by involving detailed quality information that is assigned to individual input data. The validation of the RainGRS estimates was performed taking account of season and kind of precipitation.


Sign in / Sign up

Export Citation Format

Share Document