scholarly journals Synthesis and Reactions of 2-(N-tetrabromophthalimido) Ethyl Acrylate Polymer with Hydroxy and Amino Compounds

2011 ◽  
Vol 54 (2) ◽  
pp. 271-279
Keyword(s):  
Ethyl Acrylate ◽  
Amino Compounds ◽  
Acrylate Polymer

The Influence of Purification of Ethyl Acrylate on the Properties of Cement Matrix

2010 ◽  
Vol 150-151 ◽  
pp. 1143-1151
Author(s):  
Chau Lee ◽  
Nian Fu Wang ◽  
Meng Xun Xiem
Keyword(s):  
Hydrogen Peroxide ◽  
Early Stage ◽  
Setting Time ◽  
Ethyl Acrylate ◽  
Cement Matrix ◽  
Strength Development ◽  
Final Setting Time ◽  
Before And After ◽  
Analysis Of Performance ◽  
Acrylate Polymer

This research mainly probes into the analysis of performance and assessment that ethyl acrylate polymer is applied to the cement matrix. The result shows that, before and after the purification, ethyl acrylate can increase the flowability of modified mortar, and with the increasing the dosage of polymer, the flowability is getting better. But if the dosage of hydrogen peroxide used to remove the residua alcohol is excessive, it is easy to cause high mortar viscosity, and that is unfavorable to the flowability. According to the setting time of the mortar under normal consistency, the result shows that the ethyl acrylate before the purification, has retarding effects on both initial and final setting time. With the increasing the dosage of polymer, it takes longer for both setting time. Besides, because hydrogen peroxide has accelerative effect, the purified ethyl acrylate can shorten the setting time of initial and final setting time. However, over dosage of hydrogen peroxide can easily lead to poor strength development in later stage. Using purified ethyl acrylate can overcome the shortcoming of lower strength of 3、7- day early stage. when hydrogen peroxide consumption is 0.5% of the total amount of acid and alcohol, the ethyl acrylate has the positive effect on improving the compressive strength. Finally, among the comprehensive assessments of the mortar testing results, EH0.5-0.1 has the significant effect of modification.

High-Temperature Homopolymerization of Ethyl Acrylate andn-Butyl Acrylate:  Polymer Characterization

2005 ◽  
Vol 38 (18) ◽  
pp. 7619-7628 ◽  
Author(s):  
Congling Quan ◽  
Masoud Soroush ◽  
Michael C. Grady ◽  
Joan E. Hansen ◽  
William J. Simonsick
Keyword(s):  
High Temperature ◽  
Butyl Acrylate ◽  
Ethyl Acrylate ◽  
Polymer Characterization ◽  
Acrylate Polymer

STUDYING REACTIVITY RATIOS AND PHYSICAL PROPERTIES OF METHACRYLIC ACID - ETHYL ACRYLATE COPOLYMER

2015 ◽  
Vol 53 (2) ◽  
Author(s):  
Tran Vu Thang ◽  
Pham Thi Thu Ha ◽  
Nguyen Van Khoi ◽  
Nguyen Van Manh ◽  
Pham Thi Thu Trang
Keyword(s):  
Physical Properties ◽  
Methacrylic Acid ◽  
Ethyl Acrylate ◽  
Reactivity Ratios ◽  
Acrylate Copolymer

Comparison of the viscoelastic penetration and tensile behaviour of poly(methyl acrylate) and poly(ethyl acrylate)

1979 ◽  
Vol 44 (6) ◽  
pp. 1942-1948 ◽  
Author(s):  
Jaroslav Hrouz ◽  
Michal Ilavský ◽  
Ivan Havlíček ◽  
Karel Dušek
Keyword(s):  
Methyl Acrylate ◽  
Poisson Ratio ◽  
Young Modulus ◽  
Ethyl Acrylate ◽  
Sample Volume ◽  
Viscoelastic Behaviour ◽  
Tensile Behaviour ◽  
Temperature Superposition ◽  
Main Transition

The viscoelastic penetration and tensile behaviour of poly(methyl acrylate) and poly(ethyl acrylate) in the main transition region have been investigated. It was found that the time-temperature superposition could be carried out in the case of the penetration viscoelastic behaviour; the temperature dependence of the penetration and tensile shift factors was the same. The superimposed curves of the penetration and Young modulus allowed us to calculate the dependence of the Poisson ratio and thus to characterize the change in sample volume with deformation. It was demonstrated that the penetration method of determination of the viscoelastic behaviour is equivalent to the tensile method.

Sign in / Sign up

Export Citation Format

Share Document