scholarly journals Analytical Study on Seismic Performance of Aluminium Sandwich Shear Wall with Different Core Shapes

2021 ◽  
Author(s):  
Alka Susan Mathew ◽  
Regi P. Mohan
Keyword(s):  
Seismic Design ◽  
Bending Strength ◽  
Weight Ratio ◽  
Shear Walls ◽  
Maximum Load ◽  
Shear Wall ◽  
Framed Structures ◽  
Critical Elements ◽  
High Rise ◽  
Analysis Of Performance

Shear walls are efficient monotonic load resisting systems in high rise or super high rise framed structures and hence are the most critical elements in seismic design. This paper focus on application of Aluminium sandwich shear walls (ASSW) consist of aluminium panels as top and bottom plates and aluminium core to serve as seismic protection system. ASSW have the advantage that these are light weight systems with high stiffness to weight ratio and bending strength. These could well replace steel shear walls which are having more structural weight. This paper presents analytical analysis of performance of ASSW under monotonic and seismic loading using ANSYS software. Sandwich shear wall models were first simulated, verified and analysis was carried out. The response of aluminum sandwich shear wall with two different core shapes or configurations are studied to obtain optimum core shape or configuration for maximum load bearing capacity. Then full scale monotonic and cyclic tests were conducted on aluminium sandwich shear wall with optimum core shapes or configurations. The obtained results allow useful information for the selection of aluminium sandwich shear wall in the seismic design of framed structures.

scholarly journals Lateral resistance of mass timber shear wall connected by withdrawal-type connectors

2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Sung-Jun Pang ◽  
Kyung-Sun Ahn ◽  
Seog Goo Kang ◽  
Jung-Kwon Oh
Keyword(s):  
Experimental Data ◽  
Seismic Design ◽  
Shear Walls ◽  
Shear Wall ◽  
Vertical Load ◽  
Lateral Resistance ◽  
Kinematic Models ◽  
Mass Timber ◽  
Timber Shear Walls ◽  
Timber Shear Wall

AbstractIn this study, the lateral resistances of mass timber shear walls were investigated for seismic design. The lateral resistances were predicted by kinematic models with mechanical properties of connectors, and compared with experimental data. Four out of 7 shear wall specimens consisted of a single Ply-lam panel and withdrawal-type connectors. Three out of 7 shear wall specimens consisted of two panels made by dividing a single panel in half. The divided panels were connected by 2 or 4 connectors like a single panel before being divided. The applied vertical load was 0, 24, or 120 kN, and the number of connectors for connecting the Ply-lam wall-to-floor was 2 or 4. As a result, the tested data were 6.3 to 52.7% higher than the predicted value by kinematic models, and it means that the lateral resistance can be designed by the behavior of the connector, and the prediction will be safe. The effects of wall-to-wall connectors, wall-to-floor connectors and vertical loads on the shear wall were analyzed with the experimental data.

scholarly journals Evaluation of Steel Plate Shear Wall Performance with Different Sections and Arrangements of Stiffeners and its Effect on Project Management during Construction and Improvement of the Building

2021 ◽  
Vol 11 (1) ◽  
pp. 6043-6063
Author(s):  
Ali Jafarian ◽  
Seyed Babak Jafarian
Keyword(s):  
Steel Plate ◽  
Nonlinear Dynamic Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Economic Benefits ◽  
Lateral Loads ◽  
Steel Plate Shear Wall ◽  
High Rise ◽  
Earthquake Force ◽  
The Future

Considering the increase in the current construction process and the future needs of Iran, the necessity to use high-rise buildings for reduction in urbanization costs and optimal use of land will be inevitable in the future. The performance of steel plate shear wall system as a modern global system, which has an effective application in high-rise buildings and also brings economic benefits compared to previous systems, is evaluated in this study. Steel Plate Shear Walls (SPSW) are a new type of system resistant to wind and earthquake lateral loads, which dates back to the 1970s. In this research, eight samples of shear wall with various stiffening arrangements and sections with ST37 and ST52 alloys are modeled. To evaluate the nonlinear dynamic analysis, the samples are subjected to the San Fernando earthquake force and are modeled and analyzed by ABAQUS software based on the finite element theory. The results of analyzing the samples indicate better performance of the system with stiffener in both vertical and horizontal directions. Also, the use of sections with ST52 alloy has improved the performance of the shear wall by approximately 40%.

scholarly journals Influence of Shear Wall on Seismic Response of a Structure

2021 ◽  
Vol 9 (9) ◽  
pp. 1054-1060
Author(s):  
Siddhesh Bisane
Keyword(s):  
Structural Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Main Concern ◽  
Structural Members ◽  
Lateral Loads ◽  
Comprehensive Understanding ◽  
High Rise ◽  
Story Drift ◽  
Wall Following

Abstract: Structural analysis is the science of determining the effects of different loads on structures. Structural stability and stiffness are a main concern in any high-rise structures. Shear walls are structural members that are mainly responsible for resisting lateral loads predominant on structures. They are mainly responsible to increase the stiffness, reduce story drift and displacement. In order to have a comprehensive understanding about the contribution of shear wall, following research is carried out. This research involves comparing two G+16 structures; one without a shear wall and one with it. The structure has 4 bays of 3m each along X direction and Z direction. In this, we will see how shear wall resists lateral sway and reduces story drift and increases stiffness. As the height increases, the shear wall absorbs more lateral load than the frame. The software to be used for analysis is STAADPro. Keywords: STAADPro, Stiffness, storey displacement, storey drift.

Analysis of Effective Location of Shear Wall for High Rise Building with U – Configuration

2021 ◽  
Vol 23 (2) ◽  
pp. 167-176
Author(s):  
Sekar Mentari ◽  
Rosi Nursani
Keyword(s):  
Lateral Displacement ◽  
Center Of Mass ◽  
Shear Walls ◽  
Shear Wall ◽  
Rotational Axis ◽  
Moment Frame ◽  
Earthquake Loads ◽  
High Rise ◽  
Live Loads ◽  
Special Moment Frame

Indonesia is one of the countries that is prone to earthquakes. In addition to the dead loads, superimposed dead loads, and live loads, the design of buildings in Indonesia must be concerned with earthquake loads. Installing shear walls in the building structure as the Special Moment Frame Dual System is one of a solution to withstand earthquake loads. However, the location of shear walls must be considered, especially in buildings with horizontal irregularities. This study aims to determine the optimum location of the shear walls in a 10-storey building that has U-configuration with dynamic earthquake loads. This research is a numerical simulation ran by modelling the structure with software. To know the effect of the shear wall’s location on a building, several variations of the shear wall configuration with different positions have been conducted. It can be seen the lateral displacement of each floor and the shear force are the response structure to withstand the dynamic earthquake loads. Shear walls that are located close to the center of mass of the building are the optimum variation because the position of the shear wall is the closest to the core area of the building, which is the rotational axis of the building.

scholarly journals EFFICIENT THREE-DIMENSIONAL MODELLING OF HIGH-RISE BUILDING STRUCTURES

2013 ◽  
Vol 19 (6) ◽  
pp. 811-822 ◽  
Author(s):  
Mohammed Jameel ◽  
A. B. M. Saiful Islam ◽  
Mohammed Khaleel ◽  
Aslam Amirahmad
Keyword(s):  
Three Dimensional ◽  
Shear Walls ◽  
Shear Wall ◽  
Frame Structure ◽  
Building Structures ◽  
Structural Behaviour ◽  
High Rise ◽  
Structural Responses ◽  
Wall Openings ◽  
Storey Building

A multi-storey building is habitually modelled as a frame structure which neglects the shear wall/slab openings along with the inclusion of staircases. Furthermore, the structural strength provided by shear walls and slabs is not precisely incorporated. With increasing building height, the effect of lateral loads on a high-rise structure increases substantially. Inclusion of shear walls and slabs with the frame leads to improved lateral stiffness. Besides, their openings may play imperative role in the structural behaviour of such buildings. In this study, 61 multi-storey building configurations have been modelled. Corresponding analyses are performed to cope with the influence of shear walls, slabs, wall openings, masonry walls and staircases in addition to frame modelling. The finite element approach is used in modelling and analysis. Structural responses in each elemental combination are evaluated through equivalent static and free vibration analyses. The assessment reveals that inclusion of only slab components with frame modelling contributes trivial improvement on structural performance. Conversely, the presence of shear wall slabs with frame improves the performance noticeably. Increasing wall openings decreases the structural responses. Furthermore, it is not recommended to model staircases in addition to frame–slab–shear wall modelling, unless the effect of wall openings and slab openings is adequately considered.

Experimental Study of Glued Laminated Guadua Bamboo Panel as an Alternative Shear Wall Sheathing Material

2012 ◽  
Vol 517 ◽  
pp. 164-170 ◽  
Author(s):  
Juan Francisco Correal ◽  
Sebastian Varela
Keyword(s):  
Experimental Study ◽  
Aspect Ratio ◽  
Alternative Energy ◽  
Shear Walls ◽  
Maximum Load ◽  
Shear Wall ◽  
Past Study ◽  
Full Size ◽  
Frame Buildings ◽  
Wood Frame

Wood frame buildings have shown good performance on past earthquakes mainly because the lateral system of those buildings was able to dissipate energy without significant loss of lateral capacity. Typically, the lateral load resisting system is provided by wood shear walls, which consist of a wood frame sheathed with wood or wood-based composites, such as Plywood or OSB panels. Taking into account the increasing forest demand for wood, there is a global need to find alternative energy-efficient, renewable and eco-friendly construction materials. Giant bamboo like Guadua Angustifolia kunt emerges as an interesting construction material, since it has a fast growing rate (3 to 4 years), high strength to weight ratio and high carbon (CO2) capture capabilities. Results of a past study conducted at the Universidad de los Andes in Bogotá-Colombia reported that Glued Laminated Guadua Bamboo (GLG) has mechanical properties comparable to those of the best structural timbers in Colombia. Potential applications of GLG include not only laminated beams and columns, but also structural panels to be used as a sheathing material for wood frame shear walls. A comprehensive experimental study has been performed on GLG sheathed shear walls in order to find an alternative sheathing material for wood frame buildings as well as to explore their possible application for residential and/or commercial construction in Colombia. A series of tests were conducted on full-size shear wall specimens in order to study the influence of the wall aspect ratio and the edge nail spacing on the shear wall performance. Based on cyclic tests on shear walls, it was found that the stiffness and maximum load carrying capacity of the wall increases as edge nail spacing decreases. In contrast, the displacement ductility capacity decreases, since the rotation of the panels is restricted when the edge nail spacing is reduced. Experimental results also revealed that stiffness, maximum load capacity, and ductility of the GLG sheathed shear walls are not affected by the aspect ratio of the wall. The final stage of the present study included dynamic shake-table tests on full-size one and two-story housing units using GLG sheathed shear walls. Results showed that the units had similar performance characteristics to those of OSB and Plywood sheathed shear walls, and it was concluded that wood-GLG combination could be a viable construction alternative from a structural point of view.

A Stress Analytical Solution of Steel Reinforced Concrete Transfer Beam

2010 ◽  
Vol 163-167 ◽  
pp. 1329-1332
Author(s):  
Bin Liang ◽  
Meng Yang
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Shear Walls ◽  
Shear Wall ◽  
Nonlinear Finite Element ◽  
Nonlinear Finite Element Method ◽  
Element Calculation ◽  
Steel Reinforced Concrete ◽  
High Rise ◽  
Tension Member

The structural behavior of a steel reinforced concrete (SRC) transfer beam in high-rise building is studied in the paper. Mechanical properties and deformation characteristics between transfer beam and shear wall are analyzed by an analytic approach and the nonlinear finite element method. The stress analytical solutions for the SRC transfer beam are obtained and agree with finite element calculation data in an actual project. The results show that the beam can be as an eccentric tension member, meanwhile the performance of shear wall must be considered. And it also shows that the shear stress and vertical compressed stress must be considered in end both transfer beam and shear wall and there is interaction between the beam and the shear walls above. The results can be used to describe the behavior of the SRC transfer beam under complicated loads.

scholarly journals COMPUTATIONAL ASSESSMENT FOR SEISMOLOGICAL PERFORMANCE OF MULTISTOREY FLAT SLAB STRUCTURES WITH (AT SPECIFIC POSITIONS) AND WITHOUT SHEAR WALLS

2021 ◽  
Vol 6 (3) ◽  
Author(s):  
Shaikh Jafar Shaikh Ismail ◽  
L. G. Patil
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Lateral Stiffness ◽  
Lateral Loads ◽  
Dead Load ◽  
Flat Slab ◽  
Variable Parameters ◽  
High Rise ◽  
Main Factors ◽  
Seismic Investigation

In present era, there is a huge scarcity of vacant land led to the development of the high rise structures. For the construction of high rise buildings, normal R.C.C. system is not suitable. These problems can overcome by using flat slab system along with shear wall arrangements. It is very essential that the shear wall position should be appropriate in structure so as to achieve the lateral stiffness and solid structure against lateral loads. In this work, two main factors i.e. with drop panels and without drop panels have been considered for 12 storey structures. In each factor 5 models of various locations of shear wall is taken for consideration. For stabilization of variable parameters such as storey displacement, storey stiffness and storey shear etc the seismic investigation & design of structures had carried out in software ETABS. After performing seismic investigation & design of all the structures, result shows that if we provide shear wall at incorrect or inappropriate locations then it will only increase the dead load and cost of the structure. So the final outcomes we have achieved is to provide shear walls at desired position where lateral loads are more predominantly acting on the structures

scholarly journals Optimal Seismic Design of Steel Plate Shear Walls Using Metaheuristic Algorithms

2018 ◽  
Author(s):  
Ali Kaveh ◽  
Mohamad Farhadmanesh
Keyword(s):  
Seismic Design ◽  
Performance Optimization ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
Metaheuristic Algorithms ◽  
Base Shear ◽  
Steel Plate Shear Walls ◽  
Steel Plate Shear Wall ◽  
Colliding Bodies Optimization

In this paper three well-known metaheuristic algorithms comprising of Colliding Bodies Optimization, Enhanced Colliding Bodies Optimization, and Particle Swarm Optimization are employed for size and performance optimization of steel plate shear wall systems. Low seismic and high seismic optimal designs of these systems are performed according to the provisions of AISC 360 and AISC 341. In one part of the low seismic example, a moment frame and Steel Plate Shear Wall (SPW) strength are compared. Performance optimization of the Special Plate Shear Wall (SPSW) for size optimized system is one of the objectives of the high seismic example. Finally, base shear sensitivity analysis on optimal high seismic design of SPSW and size optimization of a 6-story to a 12-story SPSW are performed to have a comprehensive view on the optimal design of steel plate shear walls.

Sign in / Sign up

Export Citation Format

Share Document