Sm-Doped PMN-PZT Ceramic Fibers with High Piezoelectric and Dielectric Properties

2021 ◽  
Author(s):  
Chao Wang ◽  
Mingwen Wang ◽  
Liao Qiao ◽  
Jing Wang ◽  
Xinya Feng ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
Ceramic Fibers ◽  
Pzt Ceramic

Preparation and Dielectric Properties of 1-3 La Modified PZT/IPN Piezoelectric Composites

2010 ◽  
Vol 105-106 ◽  
pp. 355-358 ◽  
Author(s):  
Z.L. Zhu ◽  
Dong Yan Tang ◽  
X.H. Zhang ◽  
Y.J. Qiao
Keyword(s):  
Heat Treatment ◽  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Lead Zirconate Titanate ◽  
Polymer Network ◽  
Lead Zirconate ◽  
Interpenetrating Polymer Network ◽  
Ceramic Fibers ◽  
Piezoelectric Composites

To prevent the potential cracking of gel fibers, La modified lead zirconate titanate (PLZT) ceramic fibers with diameter within 50µm were achieved by embedding into PLZT powders during the heat treatment. Then the 1-3 PLZT fiber/interpenetrating polymer network (IPN) piezoelectric composites were prepared by casting the IPN precursors onto the well aligned ceramic fibers. The influences of the heating temperatures and La amounts on the dielectric constant, dielectric loss with frequencies and piezoelectric constant of PLZT were investigated in detail. The morphologies of fibers and composites were observed by biological microscope. And also, the dielectric constant of PLZT fibers and PLZT fiber/IPN piezoelectric composites were detected.

Crystal Structure and Dielectric Properties of PZT Ferroelectric Ceramic Fibers

2010 ◽  
Vol 408 (1) ◽  
pp. 86-90 ◽  
Author(s):  
Z. X. Xiong ◽  
J. Pan ◽  
H. Xue ◽  
M. F. Mai ◽  
H. Qiu ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Dielectric Properties ◽  
Ferroelectric Ceramic ◽  
Ceramic Fibers

Dielectric Properties of PNN-PZT Ceramic Nanocomposites

2021 ◽  
Vol 214 (1) ◽  
pp. 90-97
Author(s):  
Orawan Khamman ◽  
Pimpilai Wannasut ◽  
Anucha Watcharapasorn ◽  
Supon Ananta
Keyword(s):  
Dielectric Properties ◽  
Pzt Ceramic ◽  
Ceramic Nanocomposites

Use of EDS mapping to characterize thermochemical stability of fibers in intermetallic matrix composites

1992 ◽  
Vol 50 (1) ◽  
pp. 160-161
Author(s):  
John R. Porter
Keyword(s):  
Spatial Information ◽  
Beam Current ◽  
Fiber Types ◽  
Ceramic Fibers ◽  
Dye Transfer ◽  
Science Center ◽  
Commercial Development ◽  
Nih Image ◽  
Intermetallic Matrix Composites ◽  
Thermochemical Stability

New ceramic fibers, currently in various stages of commercial development, have been consolidated in intermetallic matrices such as γ-TiAl and FeAl. Fiber types include SiC, TiB2 and polycrystalline and single crystal Al2O3. This work required the development of techniques to characterize the thermochemical stability of these fibers in different matrices.SEM/EDS elemental mapping was used for this work. To obtain qualitative compositional/spatial information, the best realistically achievable counting statistics were required. We established that 128 × 128 maps, acquired with a 20 KeV accelerating voltage, 3 sec. live time per pixel (total mapping time, 18 h) and with beam current adjusted to give 30% dead time, provided adequate image quality at a magnification of 800X. The maps were acquired, with backgrounds subtracted, using a Noran TN 5500 EDS system. The images and maps were transferred to a Macintosh and converted into TIFF files using either TIFF Maker, or TNtolMAGE, a Microsoft QuickBASIC program developed at the Science Center. From TIFF files, images and maps were opened in either NIH Image or Adobe Photoshop for processing and analysis and printed from Microsoft Powerpoint on a Kodak XL7700 dye transfer image printer.

A TEM investigation of silicon nitride whiskers

1987 ◽  
Vol 45 ◽  
pp. 160-161
Author(s):  
Tapan Roy
Keyword(s):  
Silicon Nitride ◽  
High Resolution ◽  
Ceramic Matrix Composites ◽  
High Resolution Electron Microscopy ◽  
Molten Silicon ◽  
Matrix Composites ◽  
Ceramic Fibers ◽  
Resolution Electron ◽  
Point To Point ◽  
Technological University

Ceramic fibers are being used to improve the mechanical properties of metal matrix and ceramic matrix composites. This paper reports a study of the structural and other microstructural characteristics of silicon nitride whiskers using both conventional TEM and high resolution electron microscopy.The whiskers were grown by T. E. Scott of Michigan Technological University, by passing nitrogen over molten silicon in the presence of a catalyst. The whiskers were ultrasonically dispersed in chloroform and picked up on holey carbon grids. The diameter of some whiskers (<70nm) was small enough to allow direct observation without thinning. Conventional TEM was performed on a Philips EM400T while high resolution imaging was done on a JEOL 200CX microscope with a point to point resolution of 0.23nm.

Ceramic fibers from hydridopolysilazane

1986 ◽  
Vol 83 ◽  
pp. 869-873 ◽  
Author(s):  
Gary E. Legrow ◽  
F. Lim ◽  
J. Lipowitz ◽  
Ronald S. Reaoch
Keyword(s):  
Ceramic Fibers

SYNTHESIS AND DIELECTRIC PROPERTIES OF LIQUID CRYSTALS CONTAINING TWO CYANO GROUPS

1979 ◽  
Vol 40 (C3) ◽  
pp. C3-37-C3-40
Author(s):  
L. A. KARAMYSHEVA ◽  
S. I. TORGOVA ◽  
E. I. KOVSHEV ◽  
M. I. BARNIK
Keyword(s):  
Liquid Crystals ◽  
Dielectric Properties ◽  
Cyano Groups
Sign in / Sign up

Export Citation Format

Share Document