Structure Insides at the Reaction Interface Between Pyrochlore Glass-Ceramics and Stainless Steel Canister Under Hot Isostatic Pressing Conditions

2021 ◽  
Author(s):  
Yingjie Zhang ◽  
Tao Wei ◽  
Alan Xu ◽  
Pranesh Dayal ◽  
Daniel J. Gregg
Keyword(s):  
Stainless Steel ◽  
Hot Isostatic Pressing ◽  
Glass Ceramics ◽  
Reaction Interface ◽  
Isostatic Pressing

Pyrochlore glass‐ceramics fabricated via both sintering and hot isostatic pressing for minor actinide immobilization

2020 ◽  
Vol 103 (10) ◽  
pp. 5470-5479
Author(s):  
Yingjie Zhang ◽  
Zhaoming Zhang ◽  
Tao Wei ◽  
Linggen Kong ◽  
Young J. Kim ◽  
...  
Keyword(s):  
Hot Isostatic Pressing ◽  
Glass Ceramics ◽  
Minor Actinide ◽  
Isostatic Pressing

scholarly journals Study on the Hot Deformation Characterization of Borated Stainless Steel by Hot Isostatic Pressing

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7110
Author(s):  
Yanbin Pei ◽  
Xuanhui Qu ◽  
Qilu Ge ◽  
Tiejun Wang
Keyword(s):  
Stainless Steel ◽  
Hot Deformation ◽  
True Strain ◽  
Hot Isostatic Pressing ◽  
Microstructural Analysis ◽  
Critical Conditions ◽  
True Strain Rate ◽  
Isostatic Pressing ◽  
Different Temperatures ◽  
Borated Stainless Steel

Borated stainless steel (BSS) specimens have a boron content of 1.86 wt%, and are prepared by hot isostatic pressing (HIP) conducted at different temperatures, ranging from 1000 to 1100 °C and a constant true strain rate (0.01, 0.1, 1 and 10 s−1). These tests, with observations and microstructural analysis, have achieved the hot deformation characteristics and mechanisms of BSS. In this research, the activation energy (Q) and Zener–Hollomon parameter (Z) were contrasted against the flow curves: Q = 442.35 kJ/mol. The critical conditions associated with the initiation of dynamic recrystallization (DRX) for BSS were precisely calculated based on the function between the strain hardening rate with the flow stress: at different temperatures from 1000 to 1100 °C: the critical stresses were 146.69–254.77 MPa and the critical strains were 0.022–0.044. The facts show that the boron-containing phase of BSS prevented the onset of DRX, despite the saturated boron in the austenite initiated DRX. The microstructural analysis showed that hot deformation promoted the generation of borides, which differed from the initial microstructure of HIP. The inhomogeneous distribution of elements in the boron-containing phase was caused by hot compression.

Producing HP Pump Barrels Utilizing Powder Metallurgy and Hot Isostatic Pressing

2009 ◽  
Author(s):  
Martin Bjurstro¨m ◽  
Carl-Gustaf Hjorth
Keyword(s):  
High Pressure ◽  
Stainless Steel ◽  
Stainless Steels ◽  
Hot Isostatic Pressing ◽  
Austenitic Stainless Steels ◽  
Pressure Vessels ◽  
Uniform Structure ◽  
Isostatic Pressing ◽  
Near Net Shape ◽  
Hip Process

The fabrication of near net shape powder metal (PM) components by hot isostatic pressing (HIP) has been an important manufacturing technology for steel and stainless steel alloys since about 1985. The manufacturing process involves inert gas atomization of powder, 3D CAD capsule design, sheet metal capsule fabrication and densification by HIP in very large pressure vessels. Since 1985, several thousand tonnes of parts have been produced. The major applications are found in the oil and gas industry especially in offshore applications, the industrial power generation industry, and traditional engineering industries. Typically, the components replace castings, forgings and fabricated parts and are produced in high alloy grades such as martensitic steels, austenitic stainless steels, duplex (ferritic/austenitic) stainless steels and nickel based superalloys. The application of PM/HIP near net shapes to pump barrels for medium to high pressure use has a number of advantages compared to the traditional forging and welding approach. First, the need for machining of the components is reduced to a minimum and welding during final assembly is reduced substantially. Mechanical properties of the PM/HIP parts are isotropic and equal to the best forged properties in the flow direction. This derives from the fine microstructure using powder powder and the uniform structure from the HIP process. Furthermore, when using the PM HIP process the parts are produced near net shape with supports, nozzles and flanges integrated. This significantly reduces manufacturing lead-time and gives greater design flexibility which improves cost for the final component. The PM HIP near net shape route has received approval from ASTM, NACE and API for specific steel, stainless steel and nickel base alloys. This paper reviews the manufacturing sequence for PM near net shapes and discusses the details of several successful applications. The application of the PM/HIP process to high pressure pump barrels is highlighted.

Producing HP Pump Barrels Utilizing Powder Metallurgy and Hot Isostatic Pressing

2009 ◽  
Author(s):  
Martin Bjurstro¨m ◽  
Carl-Gustaf Hjorth
Keyword(s):  
High Pressure ◽  
Stainless Steel ◽  
Stainless Steels ◽  
Hot Isostatic Pressing ◽  
Austenitic Stainless Steels ◽  
Pressure Vessels ◽  
Uniform Structure ◽  
Isostatic Pressing ◽  
Near Net Shape ◽  
Hip Process

The fabrication of near net shape powder metal (PM) components by hot isostatic pressing (HIP) has been an important manufacturing technology for steel and stainless steel alloys since about 1985. The manufacturing process involves inert gas atomization of powder, 3D CAD capsule design, sheet metal capsule fabrication and densification by HIP in very large pressure vessels. Since 1985, several thousand tonnes of parts have been produced. The major applications are found in the oil and gas industry especially in offshore applications, the industrial power generation industry, and traditional engineering industries. Typically, the components replace castings, forgings and fabricated parts and are produced in high alloy grades such as martensitic steels, austenitic stainless steels, duplex (ferritic/austenitic) stainless steels and nickel based superalloys. The application of PM/HIP near net shapes to pump barrels for medium to high pressure use has a number of advantages compared to the traditional forging and welding approach. First, the need for machining of the components is reduced to a minimum and welding during final assembly is reduced substantially. Mechanical properties of the PM/HIP parts are isotropic and equal to the best forged properties in the flow direction. This derives from the fine microstructure using powder powder and the uniform structure from the HIP process. Furthermore, when using the PM HIP process the parts are produced near net shape with supports, nozzles and flanges integrated. This significantly reduces manufacturing lead-time and gives greater design flexibility which improves cost for the final component. The PM HIP near net shape route has received approval from ASTM, NACE and API for specific steel, stainless steel and nickel base alloys. This paper reviews the manufacturing sequence for PM near net shapes and discusses the details of several successful applications. The application of the PM/HIP process to high pressure pump barrels is highlighted.

Stainless steel/glass–ceramic interactions under hot isostatic pressing (HIPing) conditions

2008 ◽  
Vol 375 (3) ◽  
pp. 315-322 ◽  
Author(s):  
Y. Zhang ◽  
H. Li ◽  
P.J. McGlinn ◽  
B. Yang ◽  
B.D. Begg
Keyword(s):  
Stainless Steel ◽  
Glass Ceramic ◽  
Hot Isostatic Pressing ◽  
Isostatic Pressing

Investigation of Processing Parameters for the Consolidation of Actinide Glass-Ceramic Wasteforms by Hot Isostatic Pressing

MRS Advances ◽  
2016 ◽  
Vol 1 (63-64) ◽  
pp. 4269-4274 ◽  
Author(s):  
Stephanie Thornber ◽  
Paul Heath ◽  
Ewan Maddrell ◽  
Martin C. Stennett ◽  
Neil C. Hyatt
Keyword(s):  
Sample Preparation ◽  
Hot Isostatic Pressing ◽  
Glass Ceramics ◽  
Processing Parameters ◽  
Isostatic Pressing ◽  
Al Content ◽  
High Temperature Heat Treatment ◽  
Nuclear Decommissioning ◽  
Optimum Formulation ◽  
The Uk

ABSTRACTGlass-ceramics were developed initially for the immobilization of miscellaneous Pu-residues at the UK’s Sellafield site from which it was uneconomic to recover Pu for reuse. Renewed interest in the immobilization of a portion of the UK PuO2 stockpile has led to glass-ceramics being evaluated for bulk Pu immobilization. The Nuclear Decommissioning Authority (NDA) in the UK have proposed hot isostatic pressing (HIP) as a potential consolidation technique for the processing of these wasteforms. In this study, zirconolite based glass-ceramics were investigated to determine an optimum formulation. The yield of zirconolite is shown to vary with glass composition and glass fraction, such that a higher Al content favours zirconolite formation. The sample preparation process is discussed to highlight the importance of a high temperature heat-treatment during sample preparation to achieve high quality HIPed wasteforms.

Sign in / Sign up

Export Citation Format

Share Document