In Situ Estimation of Effective Hydraulic Conductivity to Improve Erosion Modeling for Rangeland Conditions

2015 ◽  
pp. 83-91
Author(s):  
James P. Dobrowolski
Keyword(s):  
Hydraulic Conductivity ◽  
Erosion Modeling ◽  
Effective Hydraulic Conductivity

scholarly journals Laboratory and In Situ Determination of Hydraulic Conductivity and Their Validity in Transient Seepage Analysis

Water ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1131
Author(s):  
Soonkie Nam ◽  
Marte Gutierrez ◽  
Panayiotis Diplas ◽  
John Petrie
Keyword(s):  
Hydraulic Conductivity ◽  
Field Measurements ◽  
Natural Soil ◽  
In Situ Tests ◽  
Seepage Analysis ◽  
Soil Deposits ◽  
Seepage Modeling ◽  
Sample Disturbance

This paper critically compares the use of laboratory tests against in situ tests combined with numerical seepage modeling to determine the hydraulic conductivity of natural soil deposits. Laboratory determination of hydraulic conductivity used the constant head permeability and oedometer tests on undisturbed Shelby tube and block soil samples. The auger hole method and Guelph permeameter tests were performed in the field. Groundwater table elevations in natural soil deposits with different hydraulic conductivity values were predicted using finite element seepage modeling and compared with field measurements to assess the various test results. Hydraulic conductivity values obtained by the auger hole method provide predictions that best match the groundwater table’s observed location at the field site. This observation indicates that hydraulic conductivity determined by the in situ test represents the actual conditions in the field better than that determined in a laboratory setting. The differences between the laboratory and in situ hydraulic conductivity values can be attributed to factors such as sample disturbance, soil anisotropy, fissures and cracks, and soil structure in addition to the conceptual and procedural differences in testing methods and effects of sample size.

Effect of temperature on streambed vertical hydraulic conductivity

2013 ◽  
Vol 45 (1) ◽  
pp. 89-98 ◽  
Author(s):  
Weihong Dong ◽  
Gengxin Ou ◽  
Xunhong Chen ◽  
Zhaowei Wang
Keyword(s):  
Hydraulic Conductivity ◽  
Water Temperature ◽  
Sediment Cores ◽  
Effect Of Temperature ◽  
In Situ Tests ◽  
Effect Of Water ◽  
Vertical Hydraulic Conductivity ◽  
Increasing Trend ◽  
Streambed Vertical Hydraulic Conductivity

In this study, in situ and on-site permeameter tests were conducted in Clear Creek, Nebraska, USA to evaluate the effect of water temperature on streambed vertical hydraulic conductivity Kv. Fifty-two sediment cores were tested. Five of them were transferred to the laboratory for a series of experiments to evaluate the effect of water temperature on Kv. Compared with in situ tests, 42 out of the 52 tests have higher Kv values for on-site tests. The distribution of water temperature at the approximately 50 cm depth of streambed along the sand bar was investigated in the field. These temperatures had values in the range 14–19 °C with an average of 16 °C and had an increasing trend along the stream flow. On average, Kv values of the streambed sediments in the laboratory tests increase by 1.8% per 1 °C increase in water temperature. The coarser sandy sediments show a greater increase extent of the Kv value per 1 °C increase in water temperature. However, there is no distinct increasing trend of Kv value for sediment containing silt and clay layers.

Decrease in Hydraulic Conductivity of a Paddy Field using Biocalcification in situ

2016 ◽  
Vol 33 (8) ◽  
pp. 690-698 ◽  
Author(s):  
Kağan Eryürük ◽  
Daisuke Suzuki ◽  
Shin'ya Mizuno ◽  
Tetsuji Akatsuka ◽  
Takayuki Tsuchiya ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Paddy Field

Estimation and Scaling of the Near-Saturated Hydraulic Conductivity

1999 ◽  
Vol 30 (3) ◽  
pp. 177-190 ◽  
Author(s):  
Per Atle Olsen
Keyword(s):  
Hydraulic Conductivity ◽  
Saturated Hydraulic Conductivity ◽  
Scaling Analysis ◽  
Laboratory Measurements ◽  
Estimation Errors ◽  
Geometric Means ◽  
Top Soil ◽  
Structured Soils ◽  
Order Of Magnitude

The hydraulic conductivity in structured soils is known to increase drastically when approaching saturation. Tension infiltration allows in situ infiltration of water at predetermined matric potentials, thus allowing exploration of the hydraulic properties near saturation. In this study, the near saturated (ψ≥-0.15 m) hydraulic conductivity was estimated both in the top- and sub-soil of three Norwegian soils. A priory analysis of estimation errors due to measurement uncertainties was conducted. In order to facilitate the comparison between soils and depths, scaling analysis was applied. It was found that the increase in hydraulic conductivity with increasing matric potentials (increasing water content) was steeper in the sub-soil than in the top-soil. The estimated field saturated hydraulic conductivity was compared with laboratory measurements of the saturated hydraulic conductivity. The geometric means of the laboratory measurements was in the same order of magnitude as the field estimates. The variability of the field estimates of the hydraulic conductivity from one of the soils was also assessed. The variability of the field estimates was generally smaller than the laboratory measurements of the saturated hydraulic conductivity.

scholarly journals Relating in situ hydraulic conductivity, particle size and relative density of superficial deposits in a heterogeneous catchment

2012 ◽  
Vol 434-435 ◽  
pp. 130-141 ◽  
Author(s):  
A.M. MacDonald ◽  
L. Maurice ◽  
M.R. Dobbs ◽  
H.J. Reeves ◽  
C.A. Auton
Keyword(s):  
Particle Size ◽  
Hydraulic Conductivity ◽  
Relative Density

scholarly journals Caracterização de parâmetros hidráulicos em depósitos fluviais paleogênicos na Bacia de Volta Redonda, RJ

2007 ◽  
Vol 30 (2) ◽  
pp. 118-132
Author(s):  
Ana Carolina Lisbôa Barboza ◽  
Gerson Cardoso da Silva Jr ◽  
Claudio Limeira Mello
Keyword(s):  
Hydraulic Conductivity ◽  
Sedimentary Facies ◽  
Fine Sand ◽  
Sedimentary Deposits ◽  
Hydrogeological Parameters ◽  
Variable Head ◽  
Medium Reservoir ◽  
Maximum Permeability

The present study aims for the characterization of the hydrogeological parameters of the Paleogenic fluvial deposits of Volta Redonda Geological Basin, through hydraulic conductivity determinations and grain sized analyses. The overall goal was to produce a hydrogeological data base applicable to the characterization of hydrofacies (interconnected sedimentary bodies with distinct hydraulic properties) and the modeling groundwater flow. The used methods used consisted of in situ permeability determinations (Guelph permeameters) and laboratory tests (variable head permeameter), besides grain size analyses carried out in each sedimentary facies in the study area. These sedimentary facies were characterized by Marques (2006) and belong to the Resende and Pinheiral formations. The permeameter results were coherent to the sedimentological characteristics. The Resende Formation sedimentary deposits are constituted by medium to fine sand with presence of argillaceous matrix and present moderate to very low hydraulic conductivity, varying between 10-4 to 10-8 cm/s, which indicates a poor reservoir. The Pinheiral Formation presents sandy layers with conglomeratic lenses, limited by small thickness pelitic intervals, with a very low permeability, with a hydraulic conductivity varying between 10-5 to 10-7 cm/s. The upper layer has the maximum permeability, around 10-3 cm/s. This formation presents a medium reservoir characteristics and it must be taken into consideration that the upper layer has as role in recharge to the aquifer. From the results of hydraulic conductivity, that varies from 10-8 to 10-3 cm/s for the Resende and Pinheiral formations, it is concluded that these deposits a low to medium hydraulic conductivity, explaining the low productivity of the water-bearing multilayered aquifer of Volta Redonda Basin.

Sign in / Sign up

Export Citation Format

Share Document