Hydration behavior of cementitious materials with all solid waste based of steel slag and blast furnace slag

2016 ◽  
Keyword(s):  
Blast Furnace ◽  
Solid Waste ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Furnace Slag

scholarly journals Synergistic Excitation Mechanism of CaO-SiO2-Al2O3-SO3 Quaternary Active Cementitious System

2021 ◽  
Vol 8 ◽  
Author(s):  
Fusheng Niu ◽  
Yukun An ◽  
Jinxia Zhang ◽  
Wen Chen ◽  
Shengtao He
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Test Block ◽  
Hydration Reaction ◽  
Alkaline Environment ◽  
Granulated Blast Furnace Slag ◽  
Cementitious System ◽  
Furnace Slag

In this study, the influence of steel slag (SS) content on the strength of the cementitious materials was investigated. The quaternary active cementitious material (CaO-SiO2-Al2O3-SO3) was prepared using various proportions of steel slag (SS), granulated blast furnace slag (BFS), and desulfurized gypsum (DG). The mechanism of synergistic excitation hydration of the cementitious materials was examined using various techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectrometry (FTIR). The strength of the mortar test block was initially increased and decreased later with the increase of the SS content. Mortar test block with 20% steel slag, 65% granulated blast furnace slag, and 15% desulfurized gypsum with 0.35 water-binder ratio showed the highest compressive strength of 57.3 MPa on 28 days. The free calcium oxide (f-CaO) in the SS reacted with water and produced calcium hydroxide (Ca(OH)2) which created an alkaline environment. Under the alkaline environment, the alkali-activated reaction occurred with BFS. In the early stage of hydration reaction, calcium silicate hydrate (C-S-H) gel and fibrous hydration product ettringite (AFt) crystals were formed, which provided early strength to the cementitious materials. As the hydration reaction progressed, the interlocked growth of C-S-H gel and AFt crystals continued and promoted the increase of the strength of the cementitious system.

scholarly journals Characterization of Supplementary Cementitious Materials and Fibers to Be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5190
Author(s):  
Laura Boquera ◽  
David Pons ◽  
Ana Inés Fernández ◽  
Luisa F. Cabeza
Keyword(s):  
Tensile Strength ◽  
Blast Furnace ◽  
High Temperature ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Iron Silicate ◽  
Supplementary Cementitious Materials ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

Six supplementary cementitious materials (SCMs) were identified to be incorporated in concrete exposed to high-temperature cycling conditions within the thermal energy storage literature. The selected SCMs are bauxite, chamotte, ground granulated blast furnace slag, iron silicate, silica fume, and steel slag. A microstructural characterization was carried out through an optical microscope, X-ray diffraction analysis, and FT-IR. Also, a pozzolanic test was performed to study the reaction of SCMs silico-aluminous components. The formation of calcium silica hydrate was observed in all SCMs pozzolanic test. Steel slag, iron silicate, and ground granulated blast furnace slag required further milling to enhance cement reaction. Moreover, the tensile strength of three fibers (polypropylene, steel, and glass fibers) was tested after exposure to an alkalinity environment at ambient temperature during one and three months. Results show an alkaline environment entails a tensile strength decrease in polypropylene and steel fibers, leading to corrosion in the later ones.

Mechanical Properties and Microstructure Analysis of Copper Tailings Solidifying with Different Cementitious Materials

2014 ◽  
Vol 878 ◽  
pp. 171-176 ◽  
Author(s):  
Xu Quan Huang ◽  
Hao Bo Hou ◽  
Min Zhou ◽  
Wei Xin Wang
Keyword(s):  
Mechanical Properties ◽  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Calcium Silicate Hydrate ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Cementitious Material ◽  
Hydration Products ◽  
New Type ◽  
Furnace Slag

With new type steel slag-blast furnace slag-fluorgypsum-based cemented material, P O42.5 cement, commonly used cementation agent in China, mechanical properties and microstructure of tailings solidification bodies are studied. The hydration products and morphology tailings concretion body in 60 days are analyzed by SEM and XRD test, which reveals the tailings cementation mechanism solidifying with different cementitious material. Furthermore, a large number of slender bar-like ettringite crystals and filamentous network-like calcium-silicate-hydrate gels bond firmly each other, which is the most important reason why steel slag-blast furnace slag-fluorgypsum base cemented material has the best tailings cementation mechanical properties.

Novel Cementious Materials from Industrial Solid Waste for Silt Soil Solidification

2010 ◽  
Vol 150-151 ◽  
pp. 711-718
Author(s):  
Guo Hua Xie ◽  
He Qing Du ◽  
Shu Jing Zhu ◽  
Yong Jie Xue
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Solid Waste ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Hydration Product ◽  
Cement Clinker ◽  
Unit Weight ◽  
Industrial Solid Waste ◽  
Furnace Slag

Four kinds of industrial solid waste, granulated blast furnace slag (GBFS), electric furnace steel slag (EFSS), semi-dry flue gas desulfurization slag (FGDS) and gypsum were activated by mechanochemistry to prepare a novel kind of cementious material, DA type soil solidification agent (DA agent). Compared to the traditional cementious materials, this paper evaluated DA agent used in silt soil solidification project. Test results showed that DA-4 was prepared with adding the 40% CFBA, 39% GBFS, 11% OPC clinker and 10% gypsum by mill and more superior in material characteristics. It was found that compressive strength of DA-4 paste and mortar specimens at 28-days cured age were 46.0 and 27.3 MPa respectively; 5% of DA-4 was used to stabilize the silt soil in lab and the maximum dry unit weight, optimum moisture content, unconfined compressive strength and CBR value were 1.754 g/cm3, 15.35%, 1.15 MPa and 95.5% respectively. The hardening mechanism of prepared cementious materials is explained by two points: the sulfite or sulfate activation on alkali blast furnace slag; and the hydration product produced from cement clinker hydration process. Besides test programs of the trial pavement section in site showed that stabilized and solidified silt soils by DA-4 can meet the requirement of subgrade of pavement for strength and stiffness.

Modeling of Alteration Behavior on Blended Cementitious Materials

2011 ◽  
Author(s):  
Hitoshi Owada ◽  
Tomoko Ishii ◽  
Mayumi Takazawa ◽  
Hiroyasu Kato ◽  
Hiroyuki Sakamoto ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Chemical Composition ◽  
Mineral Composition ◽  
Blast Furnace Slag ◽  
Fine Powder ◽  
Cementitious Materials ◽  
Leaching Tests ◽  
Measured Concentration ◽  
Furnace Slag

A “realistic alteration model” is needed for various cementitious materials. Hypothetical settings of mineral composition calculated based on the chemical composition of cement, such as Atkins’s model, have been used to estimate the alteration of cementitious material. However, model estimates for the concentration of certain elements such as Al and S in leachate have been different from experimental values. In a previous study, we created settings for a mineralogical alteration model by taking the initial chemical composition of cementitious materials from analysis results in experiments and applying their ratios to certain hydrated cement minerals, then added settings for secondary generated minerals in order to account for Ca leaching. This study of alteration estimates for ordinary portland cement (OPC) in groundwater showed that the change in Al and S concentrations in simulated leachate approached values for actual leachate[1]. In the present study, we develop an appropriate mineral alteration model for blended cementitious materials and conduct batch-type leaching experiments that use crushed samples of blast furnace slag cement (BFSC), silica cement (SC), and fly ash cement (FAC). The cement blends in these experiments used OPC blended with blast furnace slag of 70 wt.%, silica cement consisting of an amorphous silica fine powder of 20 wt.%, and fly ash of 30 wt.%. De-ionized water was used as the leaching solution. The solid-liquid ratios in the leaching tests were varied in order to simulate the alteration process of cement hydrates. The compositions of leachate and minerals obtained from leaching tests were compared with those obtained from models using hypothetical settings of mineral composition. We also consider an alteration model that corresponds to the diversity of these materials. As a result of applying the conventional OPC model to blended cementitious materials, the estimated Al concentration in the aqueous solution was significantly different from the measured concentration. We therefore propose an improved model that takes better account of Al behavior by using a more reliable initial mineral model for Al concentration in the solution.

Influence of transition metal (Fe, Co, and Ag) doping on the MnOx–CeO2/Ti-bearing blast furnace slag catalyst for selective catalytic reduction of NOx with NH3 at low temperature

2017 ◽  
Vol 41 (19) ◽  
pp. 11299-11307 ◽  
Author(s):  
Rong Liu ◽  
Yifan Xu ◽  
Fei Ye ◽  
Feng Jia ◽  
Rui Xu
Keyword(s):  
Blast Furnace ◽  
Low Temperature ◽  
Transition Metal ◽  
Solid Waste ◽  
Selective Catalytic Reduction ◽  
Blast Furnace Slag ◽  
Catalytic Reduction ◽  
Industrial Solid Waste ◽  
Reduction Of Nox ◽  
Furnace Slag

Mn–Ce based catalysts supported on Ti-bearing blast furnace slag (industrial solid waste) and the doping of transition metals were studied.

Study on Sulfate Resistance of Concrete with Compound Mineral Admixture

2011 ◽  
Vol 99-100 ◽  
pp. 420-425 ◽  
Author(s):  
Qian Rong Yang ◽  
Xiao Qian Wang ◽  
Hui Ji
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Sulfate Attack ◽  
Mineral Admixture ◽  
Sulfate Resistance ◽  
Chemical Attack ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

The strength, expansion and amount of scaling of concrete with compound mineral admixture (CMA) from steel slag, granulated blast furnace slag and fly ash were studied. The result shows that damage by crystallization press from sulfate attack when concrete was exposed to sulfate environments under wetting–drying alternation is much larger than that from sulfate chemical attack. Adding CMA to concrete could reduce the damage from expansion of concrete caused by sulfate chemical attack, but the resistance of concrete to damage by crystallization press from sulfate attack was remarkably reduced.

Sign in / Sign up

Export Citation Format

Share Document