Research on the mechanical properties of SAP concrete block masonry

2016 ◽  
Keyword(s):  
Mechanical Properties ◽  
Concrete Block

Mechanical Properties of Various Models of Interlocking Concrete Blocks under In-Plane and Out-of-Plane Loads

2021 ◽  
Vol 881 ◽  
pp. 149-156
Author(s):  
Mochamad Teguh ◽  
Novi Rahmayanti ◽  
Zakki Rizal
Keyword(s):  
Mechanical Properties ◽  
Building Material ◽  
Experimental Tests ◽  
Concrete Block ◽  
Masonry Wall ◽  
Masonry Walls ◽  
Plane Shear ◽  
Out Of Plane ◽  
Concrete Blocks ◽  
Local Materials

Building material innovations in various interlocking concrete block masonry from local materials to withstand lateral earthquake forces is an exciting issue in masonry wall research. The block hook has an advantage in the interlocking system's invention to withstand loads in the in-plane and out-of-plane orientations commonly required by the masonry walls against earthquake forces. Reviews of the investigation of in-plane and out-of-plane masonry walls have rarely been found in previous studies. In this paper, the results of a series of experimental tests with different interlocking models in resisting the simultaneous in-plane shear and out-of-plane bending actions on concrete blocks are presented. This paper presents a research investigation of various interlocking concrete blocks' mechanical properties with different hook thicknesses. Discussion of the trends mentioned above and their implications towards interlocking concrete block mechanical properties is provided.

Thermo-Physical Behaviour and Mechanical Properties of Experimentally Enhanced Rubberised Concrete Block

2014 ◽  
Vol 925 ◽  
pp. 169-174
Author(s):  
Khalid B. Najim ◽  
Ibrahim A. Al-Jumaily
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Concrete Block ◽  
Crumb Rubber ◽  
Concrete Wall ◽  
Normal Concrete ◽  
Physical Behaviour ◽  
Concrete Blocks ◽  
Rubber Concrete

The aim of the presented study is to investigate the thermo-physical behaviour and mechanical properties of mortar pre-coated crumb rubber concrete block. For this purpose, thermal conductivity, emissivity and effusively will be tested in addition to the specific heat capacity. Thereafter, dynamic calculator software will be used to study the behaviour of a wall that constructed using the suggested concrete block and a comparison with a normal concrete wall will be made. Compressive, splitting tensile and flexural strength were tested as well. The results show that concrete blocks which meet the requirement of strength can be produced with about 300 kg/m3 of crumb rubber aggregate.

Recycling of Concentration Tailings of Iron Ore for the Production of Concrete Block (Pavers)

2014 ◽  
Vol 775-776 ◽  
pp. 631-634 ◽  
Author(s):  
Fabiane Leocádia da Silva ◽  
Fernando Gabriel S. Araújo ◽  
Camila G. Castro ◽  
Jefferson J. Mendes ◽  
Fernando L. von Krüger
Keyword(s):  
Mechanical Properties ◽  
Iron Ore ◽  
Concrete Block ◽  
Morphological Properties ◽  
Iron Ore Tailings ◽  
Physical Chemical

This paper studies the technological feasibility of using iron ore tailings as additives in cement pavers for the optimization of the mechanical properties and color modulation.Thus, to study the physical, chemical, optical and morphological properties of the tailings, they were characterized for the composition, mineralogy and granulometry. To optimize the procedure of preparing iron ore tailings as additives in the production of new concrete pavers and to determine their effects on the properties of pavers they, were added in ratios of 0% to 50% in substitution of traditional aggregates. The pavers were characterized for hermeticity and mechanical properties.

scholarly journals Mechanical Properties of Light Transmitting Concrete

2019 ◽  
Vol 9 (3) ◽  
pp. 2522-2525
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Cost Analysis ◽  
Optical Fibers ◽  
Concrete Block ◽  
Research Paper ◽  
Conventional Concrete ◽  
The Cost

This research paper deals with the mechanical properties of translucent concrete. Translucent concrete block is prepared by inserting the optical fibers from one side to other. The casted translucent concrete cubes are tested for mechanical properties and compare the results with mechanical properties. The cost analysis is carried out for both the concretes. Results show the improved tensile strength and similar compressive strength of translucent concrete than conventional concrete.

scholarly journals Mechanical Properties of Concrete and Hollow Concrete Blocks Containing Steel and Nylon Fibres

2019 ◽  
Vol 8 (6) ◽  
pp. 3162-3168
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Steel Fibre ◽  
Concrete Block ◽  
Concrete Mix ◽  
Different Types ◽  
Concrete Blocks ◽  
Nylon Fibre ◽  
Strength Improvement

An attempt has been made in this paper to study the effect on the mechanical properties of the concrete and hollow concrete block when different types of fibres were added to the mix. The two different types of fibres added include Steel fibres with hooked end and of length 60mm at five different fibre ratios of 2.5%, 2.75%, 3.0%, 3.25% and 3.5% and Nylon fibres having a length of 18mm at the content of 0.5%, 0.75%, 1.0%, 1.25% and 1.50%. The concept of fibre hybridization was also analyzed and the effect was studied by preparing concrete mix with various percentage combinations of steel and nylon fibres at a total fibre ratio of 3% by weight of cement. The investigation focused on finding the optimum values of fibres to be added and also carried out the compressive strength and tensile strength of concrete with and without fibres. The compressive strength of hollow concrete blocks made with and without fibres was also analyzed. The samples of concrete and hollow concrete blocks were cast and immersed in water for a curing period of 28 days. The results on strength of fibre added concrete and hollow concrete block obtained was compared with the control mix result and the study concludes that the steel fibre and nylon fibre added concrete and hollow concrete block showed an improvement in the mechanical properties for each fibre ratio considered. Out of the various combinations of steel and nylon fibre tried, the best compressive strength improvement was exhibited by the concrete mix with 3% of the steel fibre without any addition of nylon fibres while the best tensile strength improvement was shown by the concrete mix with 2.25% of steel fibre and 0.75% of nylon fibre.

scholarly journals EXPERIMENTAL INVESTIGATION OF MECHANICAL PROPERTIES OF SOLID CONCRETE BLOCK MASONRY EMPLOYING DIFFERENT MORTAR RATIOS

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Muhammad Rizwan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Shear Strength ◽  
Research Work ◽  
Concrete Block ◽  
Unit Weight ◽  
Three Samples ◽  
Individual Unit ◽  
Concrete Blocks

This research work aims to investigate experimentally the mechanical properties of solid concrete blocks as an individual unit and assembly (block masonry) employing different mortar mix ratios. The material properties of the concrete block unit, such as compressive strength and unit weight were explored by taking three samples from the four local factories. The block masonry assemblages were subjected to various load patterns for the evaluation of compressive strength, diagonal tensile strength and shear strength. For the bond, four types of mortars i.e., cement – sand (1:4), cement – sand (1:8), cement – sand – khaka (1:2:2) and cement – sand – khaka (1:4:4) were used in the joints of concrete block masonry assemblages. (Khaka is a by-product formed in the stone crushing process). For each type of mortar, three samples of block masonry were fabricated for compressive strength, shear strength and diagonal tensile strength, and tested in the laboratory. It is observed that the replacement of sand by khaka enhanced the mechanical properties of masonry.

Mechanical Properties Research on Concrete Block Doped Nano-TiO2 under the Conditions of Common Conservation

2012 ◽  
Vol 238 ◽  
pp. 9-12
Author(s):  
Zhi Yong Deng
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Construction Material ◽  
Concrete Strength ◽  
High Strength ◽  
Concrete Block ◽  
Compressive Properties ◽  
Compressive Test ◽  
High Durability

As a new high performance construction material, concrete doped nano-TiO2 greatly expanded its application in engineering with the advantages of high strength and high durability. By compressive test of concrete block doped nano-TiO2 under the conditions of common conservation, this paper respectively studies the regulation of compressive properties of the concrete block affected by the factors such as concrete strength and nano-TiO2 dioxide.

Sign in / Sign up

Export Citation Format

Share Document