scholarly journals Compatibility of Biocontainers in Commercial Greenhouse Crop Production

2013 ◽  
Vol 23 (2) ◽  
pp. 149-156 ◽  
Author(s):  
Andrew Koeser ◽  
Gary Kling ◽  
Candice Miller ◽  
Daniel Warnock
Keyword(s):  
Production Process ◽  
Crop Production ◽  
Production Systems ◽  
Plant Performance ◽  
Greenhouse Production ◽  
Solenostemon Scutellarioides ◽  
Current Production ◽  
Areas Of Concern ◽  
Performance Results ◽  
Plastic Containers

Despite consumer interest in biocontainers, their use in commercial greenhouse production remains limited. Previous research indicates that a perceived incompatibility of biocontainers with current production systems may be a barrier to their widespread adoption. This article investigates two potential areas of concern for growers looking to adopt biocontainers as part of their production process: 1) the ability of biocontainers to withstand the rigors of a semimechanized commercial production process, and 2) biocontainer performance under three different irrigation methods (i.e., hand, ebb-and-flood, and drip irrigation). In the two studies presented here, ‘Florida Sun Jade’ coleus (Solenostemon scutellarioides) was evaluated to match measures of container resiliency with plant performance. Results indicate that plants grown in biocontainers were of equal size and quality as those grown in conventional plastic containers within each of the irrigation types tested. However, some biocontainers were more prone to damage during crop production, handling, and shipping.

scholarly journals Economics of Utilizing Alternative Containers in Ornamental Crop Production Systems

2015 ◽  
Vol 25 (1) ◽  
pp. 17-25 ◽  
Author(s):  
Robin G. Brumfield ◽  
Alyssa J. DeVincentis ◽  
Xueni Wang ◽  
R. Thomas Fernandez ◽  
Susmitha Nambuthiri ◽  
...  
Keyword(s):  
Crop Production ◽  
Production Systems ◽  
The United States ◽  
Plant Production ◽  
Water Demands ◽  
Process Use ◽  
Shipping Costs ◽  
Current Production ◽  
Cost Of Production ◽  
The Cost

As high-input systems, plant production facilities for liner and container plants use large quantities of water, fertilizers, chemical pesticides, plastics, and labor. The use of renewable and biodegradable inputs for growing aesthetically pleasing and healthy plants could potentially improve the economic, environmental, and social sustainability of current production systems. However, costs for production components to integrate sustainable practices into established systems have not been fully explored to date. Our objectives were to determine the economic costs of commercial production systems using alternative containers in aboveground nursery systems. We determined the cost of production (COP) budgets for two woody plant species grown in several locations across the United States. Plants were grown in plastic pots and various alternative pots made from wood pulp (WP), fabric (FB), keratin (KT), and coconut fiber (coir). Cost of production inputs for aboveground nursery systems included the plant itself (liner), liner shipping costs, pot, pot shipping costs, substrate, substrate shipping costs, municipal water, and labor. Our results show that the main difference in the COP is the price of the pot. Although alternative containers could potentially increase water demands, water is currently an insignificant cost in relation to the entire production process. Use of alternative containers could reduce the carbon, water, and chemical footprints of nurseries and greenhouses; however, the cost of alternative containers must become more competitive with plastic to make them an acceptable routine choice for commercial growers.

scholarly journals Evaluation of Biopolymer-coated Fiber Containers for Container-grown Plants

2014 ◽  
Vol 24 (4) ◽  
pp. 439-448 ◽  
Author(s):  
Kenneth G. McCabe ◽  
James A. Schrader ◽  
Samy Madbouly ◽  
David Grewell ◽  
William R. Graves
Keyword(s):  
Crop Production ◽  
Natural Fibers ◽  
Plant Production ◽  
Coir Fiber ◽  
Tagetes Patula ◽  
Greenhouse Production ◽  
Coated Fiber ◽  
And Performance ◽  
Strength And Durability ◽  
Plastic Containers

Biocontainers made of coconut coir, paper, peat, wood, or other natural fibers are considered sustainable alternatives to containers made of petroleum-based plastics, but growers’ acceptance and use of fiber containers have been limited by their comparatively high cost, low strength and durability, and poor water-use efficiency (WUE). We hypothesized that coating fiber containers with biopolymers would improve their strength, durability, and WUE during plant production. We compared the effectiveness of fiber containers of coir, paper, and wood that were either uncoated or coated with one of four biopolymers [polyamide (PA), polylactic acid (PLA), polyurethane (PU), or tung oil (TO)], peat-fiber containers that were uncoated, and injection-molded containers made of petroleum-based plastic. Ease of coating was assessed, along with the cost and strength of containers, their effectiveness during greenhouse production of ‘Honeycomb’ marigold (Tagetes patula), ‘Autumn Bell’ pepper (Capisicum annuum), ‘Madness Red’ petunia (Petunia ×hybrida), ‘St. John’s Fire’ salvia (Salvia splendens), and ‘Rutgers’ tomato (Solanum lycopersicum), and their WUE during production of salvia and tomato. Castor oil-based PU was the least expensive biopolymer coating and was easy to apply as a water-based dispersion. The other biopolymers required a hazardous and costly organic solvent (e.g., chloroform). Coatings of PA, PLA, and PU increased container strength and durability, and improved WUE during plant production. Coated paper-fiber containers resisted horizontal compression better than petroleum-plastic containers. Greenhouse-grown plants in containers coated with PA, PLA, or PU were larger and rated healthier and of better quality than plants grown in uncoated or TO-coated fiber containers. Plants grown in paper- and coir-fiber containers coated with PA, PLA, or PU were similar in health and size to plants grown in petroleum-plastic containers. Two coatings of PU on paper-fiber containers resulted in WUE similar to that of petroleum-plastic containers for both 4- to 5-inch and gallon sizes. Coating fiber containers with biopolymers slowed, but did not halt, their degradation in soil, indicating that decomposition in soil may be a suitable end-of-life option for biopolymer-coated fiber containers. Our results support the hypothesis that coating fiber containers with biopolymers can improve their effectiveness for crop production, while maintaining an improvement in sustainability over petroleum plastic. Paper-fiber containers coated with PU showed particular promise and were similar in material cost and performance to containers made of petroleum-based plastic.

scholarly journals Phosphate and Potassium Retention and Release during Chrysanthemum Production from Precharged Materials: I. Alumina

2000 ◽  
Vol 125 (6) ◽  
pp. 748-756 ◽  
Author(s):  
Kimberly A. Williams ◽  
Paul V. Nelson ◽  
Dean Hesterberg
Keyword(s):  
Crop Production ◽  
Sole Source ◽  
Production Cycle ◽  
Particle Sizes ◽  
Greenhouse Production ◽  
Cycle Growth ◽  
Root Media ◽  
Current Production ◽  
Production Practices ◽  
Potassium Retention

Soilless root media have little capacity to retain PO4 or K, and this contributes to leaching of these nutrients during greenhouse crop production. The objective of this research was to evaluate the suitability of precharged alumina as a sole source of PO4 and K during greenhouse production of potted chrysanthemum [Dendranthema ×grandiflora Kitam. (syn. Chrysanthemum ×morifolium Ramat.)]. Phosphate and K adsorption and desorption curves were created at 25 °C for two particle sizes (0.5 to 0.9 and 1.8 to 3.2 mm) of alumina (Al2O3; acid-washed and unwashed), and a medium of 7 peat: 3 perlite (v/v) using solutions of KH2 PO4 (P at 0 to 20,000 mg.L-1). Based on these curves, 1.8 to 3.2 mm, unwashed alumina was selected for use in the studies. Precharged alumina was tested in two greenhouse studies at 10% and 30% (v/v) of a peat-perlite medium used to produce `Sunny Mandalay' chrysanthemum. Phosphate, K, and pH were determined on unaltered root medium solutions collected throughout the 10-week cropping cycle, and foliar analyses were conducted on tissue collected at the middle and end of the cycle. Potassium release was adequate to meet chrysanthemum demand for 4 weeks, but inadequate for the remainder of the production cycle. Precharged alumina retained and released PO4 at sustained concentrations (P at <2 mg·L-1) over the course of a 10-week cropping cycle. Growth of plants receiving PO4 from precharged alumina was not significantly different from the controls receiving liquid fertilizer (P at 46.5 mg·L-1) at each watering when precharged alumina comprised 30% of the medium, and only slightly less when precharged alumina comprised 10% of the medium. A phosphorus budget showed that while 36% (103 mg) of the applied PO4-P was lost in the leachate of the controls, only 0.1% (2 mg) was lost from plants produced with alumina-P. This research demonstrates that in a soilless medium with physical properties similar to standard commercial mixes, low but adequate PO4 concentrations can be achieved and sustained using current production practices.

scholarly journals Light and Microbial Lifestyle: The Impact of Light Quality on Plant–Microbe Interactions in Horticultural Production Systems—A Review

Horticulturae ◽  
2019 ◽  
Vol 5 (2) ◽  
pp. 41 ◽  
Author(s):  
Beatrix W. Alsanius ◽  
Maria Karlsson ◽  
Anna Karin Rosberg ◽  
Martine Dorais ◽  
Most Tahera Naznin ◽  
...  
Keyword(s):  
Fungal Pathogens ◽  
Molecular Mechanisms ◽  
Light Quality ◽  
Production Systems ◽  
Plant Performance ◽  
Greenhouse Production ◽  
Alternative Technologies ◽  
Plant Environment ◽  
Microbe Interactions ◽  
The Impact

Horticultural greenhouse production in circumpolar regions (>60° N latitude), but also at lower latitudes, is dependent on artificial assimilation lighting to improve plant performance and the profitability of ornamental crops, and to secure production of greenhouse vegetables and berries all year round. In order to reduce energy consumption and energy costs, alternative technologies for lighting have been introduced, including light-emitting diodes (LED). This technology is also well-established within urban farming, especially plant factories. Different light technologies influence biotic and abiotic conditions in the plant environment. This review focuses on the impact of light quality on plant–microbe interactions, especially non-phototrophic organisms. Bacterial and fungal pathogens, biocontrol agents, and the phyllobiome are considered. Relevant molecular mechanisms regulating light-quality-related processes in bacteria are described and knowledge gaps are discussed with reference to ecological theories.

scholarly journals Fertilizer Effects of Soy-plastic Containers during Crop Production and Transplant Establishment

HortScience ◽  
2013 ◽  
Vol 48 (6) ◽  
pp. 724-731 ◽  
Author(s):  
James A. Schrader ◽  
Gowrishankar Srinivasan ◽  
David Grewell ◽  
Kenneth G. McCabe ◽  
William R. Graves
Keyword(s):  
Crop Production ◽  
Relative Concentration ◽  
Field Trials ◽  
Available Nitrogen ◽  
Crop Species ◽  
Greenhouse Production ◽  
Available N ◽  
Greenhouse Trial ◽  
Material Formulation ◽  
Plastic Containers

As part of a project to develop and assess bio-based, biodegradable plastics for their potential to replace petroleum-based plastics in specialty-crop containers, we evaluated prototype containers made of protein-based polymers from soybean [Glycine max (L.) Merr.] for their effectiveness during production of plants in greenhouses and subsequent establishment of those plants outdoors. Our objective was to assess the function and biodegradation of soy-based plastic containers with special attention to whether a fertilizer effect results from degrading containers before and after plants are moved outdoors. In our first experiment, plants of tomato (Solanum lycopersicum L.) and pepper (Capsicum annuum L.) were grown in soy-plastic containers and control containers of petroleum-based (polypropylene) plastic under greenhouse conditions for 4 weeks. Each plant then was transplanted and grown in an outdoor garden plot for 5 weeks with the container removed, broken into pieces less than 4 cm in diameter, and installed beneath the roots of the transplant. Three additional experiments were performed: a greenhouse trial to quantify the relative concentration and form of plant-available nitrogen (N) released from soy-plastic containers of three types [soy plastic, soy plastic coated with polylactic acid (PLA), and soy–PLA polymer blended 50:50 by weight] during production; a greenhouse trial to evaluate the same three container types under production conditions with five container-crop species; and a field trial to assess the effects of the 50:50 soy–PLA container on transplant establishment. Plant-available N was released from soy-based plastic containers during greenhouse production, and transplant establishment was enhanced when the soy-based container was removed, crushed, and installed in the soil near plant roots. During greenhouse production, containers of high-percentage soy plastic released N at an excessive rate (623 mg·L−1 in leachate) and predominantly in the form of NH4+ (99.4% at 3 weeks of culture). Containers made by blending soy plastic with PLA released N at a favorable rate during production. In both field trials, growth and health of plants cultured in soy containers were better than those of controls. Although the design and material formulation of soy-plastic containers need to be improved to optimize container integrity and plant health during production, our results illustrate the potential to use soy-based plastics in biodegradable containers that release N at rates that promote growth and health of plants during greenhouse production and establishment of transplants outdoors.

scholarly journals Semi-Transparent Organic Photovoltaics Applied as Greenhouse Shade for Spring and Summer Tomato Production in Arid Climate

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1152
Author(s):  
Rebekah Waller ◽  
Murat Kacira ◽  
Esther Magadley ◽  
Meir Teitel ◽  
Ibrahim Yehia
Keyword(s):  
Solar Radiation ◽  
Organic Photovoltaics ◽  
Crop Production ◽  
Production Systems ◽  
High Light ◽  
Growth And Yield ◽  
Control Group ◽  
Tomato Crop ◽  
Tomato Production ◽  
Control Section

Recognizing the growing interest in the application of organic photovoltaics (OPVs) with greenhouse crop production systems, in this study we used flexible, roll-to-roll printed, semi-transparent OPV arrays as a roof shade for a greenhouse hydroponic tomato production system during a spring and summer production season in the arid southwestern U.S. The wavelength-selective OPV arrays were installed in a contiguous area on a section of the greenhouse roof, decreasing the transmittance of all solar radiation wavelengths and photosynthetically active radiation (PAR) wavelengths (400–700 nm) to the OPV-shaded area by approximately 40% and 37%, respectively. Microclimate conditions and tomato crop growth and yield parameters were measured in both the OPV-shaded (‘OPV’) and non-OPV-shaded (‘Control’) sections of the greenhouse. The OPV shade stabilized the canopy temperature during midday periods with the highest solar radiation intensities, performing the function of a conventional shading method. Although delayed fruit development and ripening in the OPV section resulted in lower total yields compared to the Control section (24.6 kg m−2 and 27.7 kg m−2, respectively), after the fourth (of 10 total) harvests, the average weekly yield, fruit number, and fruit mass were not significantly different between the treatment (OPV-shaded) and control group. Light use efficiency (LUE), defined as the ratio of total fruit yield to accumulated PAR received by the plant canopy, was nearly twice as high as the Control section, with 21.4 g of fruit per mole of PAR for plants in the OPV-covered section compared to 10.1 g in the Control section. Overall, this study demonstrated that the use of semi-transparent OPVs as a seasonal shade element for greenhouse production in a high-light region is feasible. However, a higher transmission of PAR and greater OPV device efficiency and durability could make OPV shades more economically viable, providing a desirable solution for co-located greenhouse crop production and renewable energy generation in hot and high-light intensity regions.

scholarly journals Precision agriculture and geospatial techniques for sustainable disease control

2021 ◽  
Author(s):  
Daniel P. Roberts ◽  
Nicholas M. Short ◽  
James Sill ◽  
Dilip K. Lakshman ◽  
Xiaojia Hu ◽  
...  
Keyword(s):  
Big Data ◽  
Disease Control ◽  
Crop Production ◽  
Plant Disease ◽  
Production Systems ◽  
Cropping Systems ◽  
Data Driven ◽  
Agricultural Community ◽  
Plant Disease Control ◽  
Crop Germplasm

AbstractThe agricultural community is confronted with dual challenges; increasing production of nutritionally dense food and decreasing the impacts of these crop production systems on the land, water, and climate. Control of plant pathogens will figure prominently in meeting these challenges as plant diseases cause significant yield and economic losses to crops responsible for feeding a large portion of the world population. New approaches and technologies to enhance sustainability of crop production systems and, importantly, plant disease control need to be developed and adopted. By leveraging advanced geoinformatic techniques, advances in computing and sensing infrastructure (e.g., cloud-based, big data-driven applications) will aid in the monitoring and management of pesticides and biologicals, such as cover crops and beneficial microbes, to reduce the impact of plant disease control and cropping systems on the environment. This includes geospatial tools being developed to aid the farmer in managing cropping system and disease management strategies that are more sustainable but increasingly complex. Geoinformatics and cloud-based, big data-driven applications are also being enlisted to speed up crop germplasm improvement; crop germplasm that has enhanced tolerance to pathogens and abiotic stress and is in tune with different cropping systems and environmental conditions is needed. Finally, advanced geoinformatic techniques and advances in computing infrastructure allow a more collaborative framework amongst scientists, policymakers, and the agricultural community to speed the development, transfer, and adoption of these sustainable technologies.

Effects of cereal rye seeding rate on waterhemp (Amaranthus tuberculatus) emergence and soybean growth and yield

2021 ◽  
pp. 1-25
Author(s):  
Mandy Bish ◽  
Brian Dintelmann ◽  
Eric Oseland ◽  
Jacob Vaughn ◽  
Kevin Bradley
Keyword(s):  
Crop Production ◽  
Production Systems ◽  
Soil Seed Bank ◽  
Linear Regression Analysis ◽  
Growth And Yield ◽  
Seeding Rate ◽  
Early Season ◽  
Cereal Rye ◽  
Herbicide Resistant ◽  
Growing Seasons

Abstract The evolution of herbicide-resistant weeds has resulted in the necessity to integrate non-chemical control methods with chemicals for effective management in crop production systems. In soybean, control of the pigweed species, particularly herbicide-resistant waterhemp and Palmer amaranth, have become predominant concerns. Cereal rye planted as a winter cover crop can effectively suppress early-season weed emergence in soybean, including waterhemp, when planted at a rate of 123 kg ha−1. The objectives of this study were to determine the effects of different cereal rye seeding rates (0, 34, 56, 79, 110, and 123 kg ha−1) on early-season waterhemp suppression and soybean growth and yield. Soybean was planted into fall-seeded cereal rye, which was terminated within four days of soybean planting. The experiment was conducted over the 2018, 2019, and 2020 growing seasons in Columbia, Missouri. Effects of cereal rye on early-season waterhemp suppression varied by year and were most consistent at 56 kg ha−1 or higher seeding rates. Linear regression analysis of cereal rye biomass, height, or stand at soybean planting showed inverse relationships with waterhemp emergence. No adverse effects to soybean growth or yield were observed at any of the cereal rye seeding rates relative to plots that lacked cereal rye cover. Result differences among the years suggest that the successfulness of cereal rye on suppression of early-season waterhemp emergence is likely influenced by the amount of waterhemp seed present in the soil seed bank.

scholarly journals Revisiting Sulphur—The Once Neglected Nutrient: It’s Roles in Plant Growth, Metabolism, Stress Tolerance and Crop Production

Agriculture ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 626
Author(s):  
Tinashe Zenda ◽  
Songtao Liu ◽  
Anyi Dong ◽  
Huijun Duan
Keyword(s):  
Plant Growth ◽  
Abiotic Stresses ◽  
Crop Production ◽  
Production Systems ◽  
Crop Productivity ◽  
Plant Phenotyping ◽  
Special Importance ◽  
Nutrient Deficiencies ◽  
Sulphur Nutrition ◽  
Physiological Processes

Sulphur plays crucial roles in plant growth and development, with its functions ranging from being a structural constituent of macro-biomolecules to modulating several physiological processes and tolerance to abiotic stresses. In spite of these numerous sulphur roles being well acknowledged, agriculture has paid scant regard for sulphur nutrition, until only recently. Serious problems related to soil sulphur deficiencies have emerged and the intensification of food, fiber, and animal production is escalating to feed the ever-increasing human population. In the wake of huge demand for high quality cereal and vegetable diets, sulphur can play a key role in augmenting the production, productivity, and quality of crops. Additionally, in light of the emerging problems of soil fertility exhaustion and climate change-exacerbated environmental stresses, sulphur assumes special importance in crop production, particularly under intensively cropped areas. Here, citing several relevant examples, we highlight, in addition to its plant biological and metabolism functions, how sulphur can significantly enhance crop productivity and quality, as well as acclimation to abiotic stresses. By this appraisal, we also aim to stimulate readers interests in crop sulphur research by providing priorities for future pursuance, including bettering our understanding of the molecular processes and dynamics of sulphur availability and utilization in plants, dissecting the role of soil rhizospherical microbes in plant sulphur transformations, enhancing plant phenotyping and diagnosis for nutrient deficiencies, and matching site-specific crop sulphur demands with fertilizer amendments in order to reduce nutrient use inefficiencies in both crop and livestock production systems. This will facilitate the proper utilization of sulphur in crop production and eventually enhance sustainable and environmentally friend food production.

Technological and ecological approaches to design and manage sustainable greenhouse production systems

2015 ◽  
pp. 45-52
Author(s):  
C. Poncet ◽  
C. Bresch ◽  
H. Fatnassi ◽  
L. Mailleret ◽  
A. Bout ◽  
...  
Keyword(s):  
Production Systems ◽  
Greenhouse Production
Sign in / Sign up

Export Citation Format

Share Document