The Effect of Moisture and Fungus on Electrical and Mechanical Properties of Plastic Insulating Materials

1945 ◽  
Author(s):  
JOHNS HOPKINS UNIV BALTIMORE MD
Keyword(s):  
Mechanical Properties ◽  
Insulating Materials ◽  
Effect Of Moisture

scholarly journals Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1616
Author(s):  
Vincenzo Titone ◽  
Antonio Correnti ◽  
Francesco Paolo La Mantia
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Moisture Content ◽  
Mechanical Testing ◽  
Hydrolytic Degradation ◽  
Slight Reduction ◽  
Biodegradable Polyester ◽  
Molding Process ◽  
Elongation At Break ◽  
Effect Of Moisture

This work is focused on the influence of moisture content on the processing and mechanical properties of a biodegradable polyester used for applications in injection molding. The pellets of the biodegradable polyester were exposed under different relative humidity conditions at a constant temperature before being compression molded. The compression-molded specimens were again placed under the above conditions before the mechanical testing. With all these samples, it is possible to determine the effect of moisture content on the processing and mechanical properties separately, as well as the combined effect of moisture content on the mechanical properties. The results obtained showed that the amount of absorbed water—both before processing and before mechanical testing—causes an increase in elongation at break and a slight reduction of the elastic modulus and tensile strength. These changes have been associated with possible hydrolytic degradation during the compression molding process and, in particular, with the plasticizing action of the moisture absorbed by the specimens.

scholarly journals Modyfikowanie HTPB (α,ω-dihydroksypolibutadienu) w reakcjach estryfikacji, silanizacji, epoksydacji i uwodornienia

2018 ◽  
pp. 30-45
Author(s):  
Michał Chmielarek ◽  
Paweł Maksimowski ◽  
Tomasz Gołofit ◽  
Katarzyna Cieślak ◽  
Wojciech Pawłowski ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperatures ◽  
Frost Resistance ◽  
High Energy ◽  
Insulating Materials ◽  
Rocket Propulsion ◽  
Materials Research ◽  
Selection Of

HTPB is a valuable comonomer for the preparation of polyurethanes. Thanks to its specific properties, it gives these materials frost resistance and excellent mechanical properties, especially at low temperatures. The polyurethanes thus obtained are used in the production of propellants used in space and military rocket propulsion, and are the basis for frost-resistant adhesives and insulating materials. Research on the selection of binder indicates the use of high energy polymers or modifications of previously used polymers improving their properties. The results of research on ways of changing the properties of HTPB through its modification and thus an increase of application possibilities will be presented.

scholarly journals Effect of moisture content on the load carrying capacity and stiffness of corner wood-based and plastic joints

BioResources ◽  
2019 ◽  
Vol 14 (4) ◽  
pp. 8640-8655
Author(s):  
Eliška Máchová ◽  
Nadežda Langová ◽  
Roman Réh ◽  
Pavol Joščák ◽  
Ľuboš Krišťák ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Relative Humidity ◽  
Moisture Content ◽  
Carrying Capacity ◽  
Calculated Data ◽  
Statistical Processing ◽  
Epoxy Adhesive ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Effect Of Moisture

The effect of moisture content on mechanical properties of corner furniture joints was evaluated for when different joining methods and materials were used. Results included statistical processing of the measured and calculated data and evaluation of the effect of selected factors on mechanical properties of joints caused by using mechanical fasteners and glue. The load-carrying capacity and stiffness of corner joints were investigated in two environments, humid and dry, with standard conditions for temperature and pressure, i.e., dry environment had a temperature of 23 °C ± 2 °C and relative humidity of 45% ± 5%, and the humid environment had a temperature of 23 °C ± 2 °C and relative humidity of 90% ± 5%. The two types of materials used were particleboard (PB) with a thickness of 12 mm and artificial stone (plastic) with a thickness of 12 mm. Both materials were tested individually as well as their combination. Epoxy and polyurethane (PUR) adhesives were used for the glued dowel joints. When the same materials were bonded, maximum load carrying capacity was achieved with PUR adhesive, material combination of plastic-plastic, and moisture content of 90%. The epoxy adhesive was most suitable for bonding materials with different properties.

Sign in / Sign up

Export Citation Format

Share Document