Submerged Manned Testing of the Prototype Hydrotech Aqua Heat System

2006 ◽  
Author(s):  
Paul E. O'Connor ◽  
Dale Hyde ◽  
Demetri Economos ◽  
Rene Beck
Keyword(s):  
Heat System

scholarly journals Critical Tectonic Limits for Geothermal Aquifer Use: Case Study from the East Slovakian Basin Rim

Resources ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 31
Author(s):  
Stanislav Jacko ◽  
Roman Farkašovský ◽  
Igor Ďuriška ◽  
Barbora Ščerbáková ◽  
Kristína Bátorová
Keyword(s):  
Heat Flow ◽  
Pannonian Basin ◽  
Open Fractures ◽  
Water Type ◽  
Geothermal Heat ◽  
The North ◽  
Heat System ◽  
Volcanic Chain ◽  
Saline Solutions

The Pannonian basin is a major geothermal heat system in Central Europe. Its peripheral basin, the East Slovakian basin, is an example of a geothermal structure with a linear, directed heat flow ranging from 90 to 100 mW/m2 from west to east. However, the use of the geothermal source is limited by several critical tectono-geologic factors: (a) Tectonics, and the associated disintegration of the aquifer block by multiple deformations during the pre-Paleogene, mainly Miocene, period. The main discontinuities of NW-SE and N-S direction negatively affect the permeability of the aquifer environment. For utilization, minor NE-SW dilatation open fractures are important, which have been developed by sinistral transtension on N–S faults and accelerated normal movements to the southeast. (b) Hydrogeologically, the geothermal structure is accommodated by three water types, namely, Na-HCO3 with 10.9 g·L−1 mineralization (in the north), the Ca-Mg-HCO3 with 0.5–4.5 g·L−1 mineralization (in the west), and Na-Cl water type containing 26.8–33.4 g·L−1 mineralization (in the southwest). The chemical composition of the water is influenced by the Middle Triassic dolomite aquifer, as well as by infiltration of saline solutions and meteoric waters along with open fractures/faults. (c) Geothermally anomalous heat flow of 123–129 °C with 170 L/s total flow near the Slanské vchy volcanic chain seems to be the perspective for heat production.

Assessment of a multiple port storage tank in a CPC-driven solar process heat system

2021 ◽  
Author(s):  
Shehab M. Abd Elfadeel ◽  
Hamza Amein ◽  
M. Medhat El-Bakry ◽  
Muhammed A. Hassan
Keyword(s):  
Storage Tank ◽  
Heat System ◽  
Process Heat

Abandoning Peat in a City District Heat System with Wind Power, Heat Pumps, and Heat Storage

2021 ◽  
Author(s):  
Nima Javanshir ◽  
Sanna Syri ◽  
Antti Teräsvirta ◽  
Ville Olkkonen
Keyword(s):  
Wind Power ◽  
Heat Storage ◽  
Heat Pumps ◽  
Heat System ◽  
City District

Primary frequency control provided by hybrid battery storage and power-to-heat system

2019 ◽  
Vol 233-234 ◽  
pp. 220-231 ◽  
Author(s):  
S.P. Melo ◽  
U. Brand ◽  
T. Vogt ◽  
J.S. Telle ◽  
F. Schuldt ◽  
...  
Keyword(s):  
Frequency Control ◽  
Battery Storage ◽  
Heat System ◽  
Primary Frequency ◽  
Primary Frequency Control

The Interrelation between Recurrent and Capital Costs in a Solar Thermal Process Heat System

1981 ◽  
Vol 103 (3) ◽  
pp. 241-243
Author(s):  
L. L. Lukens ◽  
W. P. Schimmel
Keyword(s):  
Energy Cost ◽  
Solar Collector ◽  
Alternative Energy ◽  
Market Penetration ◽  
Heat Temperature ◽  
Capital Costs ◽  
Heat System ◽  
Process Heat ◽  
Cleaning Cost ◽  
Mirror Reflectance

The effect of operation and maintenance (O&M) costs on energy produced by solar collector systems is crucial to the market penetration of solar process heat as an alternative energy source. In the present paper, a particular O&M operation, regular collector cleaning, is considered in order to determine its effect upon annualized life cycle energy cost. A first-order model of mirror reflectance degradation as a function of time is constructed from experimental data taken at Albuquerque, N.M. This is used as input to a systems optimization model of a line-focus solar collector process heat installation. The energy cost variation is considered as a function of cleaning cost per unit of collector aperture and cleaning interval. Results are presented for a process heat temperature of 177°C.

scholarly journals Subcritical and Supercritical Operation of Innovative Thermal Mechanical Refrigeration System

2020 ◽  
Author(s):  
Ahmad Sleiti ◽  
Wahib Al-Ammari ◽  
Mohammed Al-Khawaja ◽  
Maxim Glushenkov ◽  
Alexander Kronberg
Keyword(s):  
Global Warming ◽  
Ozone Depletion ◽  
Fossil Fuels ◽  
Waste Heat ◽  
Low Frequency ◽  
Low Grade ◽  
Refrigeration System ◽  
Heat System ◽  
Global Warming Potentials ◽  
Carbon Dioxide Co2

Around 17% of the globally generated energy is consumed for residential, commercial, and transportation refrigeration. The current cooling technologies utilize refrigerants with high Ozone Depletion and Global Warming Potentials. Furthermore, the current technologies are expensive alongside with toxicity and flammability hazards. On the other side, energy produced by combustion of fossil fuels results in substantial amounts of waste heat. Therefore, it is necessary to develop new refrigeration technologies that utilize waste heat as a source of energy with ecofriendly refrigerants with zero ozone depletion potential and zero global warming potential. In addition, this thermal mechanical refrigeration (TMR) technology improves the energy efficiency of the source of waste heat system and minimizes the emissions of the carbon dioxide (CO2). In this study, a novel thermo-mechanical refrigeration system is proposed. It operates with low-grade energy sources (such as waste heat) at temperature range of 60 oC to 100 oC. Furthermore, it has the advantage of working with low-frequency driver-compressor unit, which eliminates noise and increases its lifetime. Moreover, the TMR system is adaptable to commercial, transportation, and residential refrigeration applications.

Evaluation of Test Protocol for Eutectic Die Attach Using High Power LEDs

2011 ◽  
Vol 2011 (1) ◽  
pp. 000136-000141 ◽  
Author(s):  
Amanda Hartnett ◽  
Seth Homer ◽  
Donald Beck ◽  
Daniel Evans
Keyword(s):  
High Power ◽  
Coefficient Of Thermal Expansion ◽  
Test Methods ◽  
Test Protocol ◽  
High Brightness ◽  
Light Emitting ◽  
Power Semiconductor ◽  
Heat System ◽  
Die Attach ◽  
Manufactured Products

High-power semiconductor devices, such as high-brightness Light Emitting Diodes (LEDs), must be mounted using a robust adhesive material to handle the temperature fluctuations generated by the chip and the mechanical stresses due to the coefficient of thermal expansion (CTE) mismatches between the die material and substrate it is mounted to. The selected material must also comply with current legislation restricting manufactured products containing numerous materials including some that were historically popular in HB LED applications due to environmental concerns. Eutectic gold-tin (AuSn) materials meet these requirements, and process recommendations for their implementation will be presented in this paper. Utilizing a Palomar Technologies die bonder, AuSn solder preforms and paste will be placed/dispensed and reflowed using a Pulsed Heat System (PHS). Evaluation methods comparing these means of eutectic die attach to a pre-plated AuSn die will be discussed. Technical generalizations will be detailed to explain the derivation of test methods as well as hypotheses of results.

Sign in / Sign up

Export Citation Format

Share Document