High Performance Long-Wave Infrared (LWIR) HgCdTe on Silicon

2005 ◽  
Author(s):  
Paul Boieriu ◽  
Chris Grein
Author(s):  
S. D. Gunapala ◽  
S. B. Rafol ◽  
D. Z. Ting ◽  
A. Soibel ◽  
J. K. Liu ◽  
...  

2010 ◽  
Author(s):  
D. W. Warren ◽  
R. H. Boucher ◽  
D. J. Gutierrez ◽  
E. R. Keim ◽  
M. G. Sivjee

2017 ◽  
Vol 7 (11) ◽  
pp. 1195 ◽  
Author(s):  
Jinjin Chen ◽  
Junhong Su ◽  
Ning Jin ◽  
Zexiao Li ◽  
Xiaodong Zhang ◽  
...  

2010 ◽  
Author(s):  
Adriana Lapadatu ◽  
Gjermund Kittilsland ◽  
Anders Elfving ◽  
Erling Hohler ◽  
Terje Kvisterøy ◽  
...  

2019 ◽  
Vol 58 (02) ◽  
pp. 1 ◽  
Author(s):  
Robert Short ◽  
Duke Littlejohn ◽  
Mike Scholten ◽  
Carlos Rivera-Ortiz ◽  
Richard Vollmerhausen ◽  
...  

1996 ◽  
Vol 421 ◽  
Author(s):  
R. D. Rajavel ◽  
O.K. Wu ◽  
J.E. Jensen ◽  
C.A. Cockrum ◽  
G.M. Venzor ◽  
...  

Abstractstructural, optical and electrical properties were evaluated. Significant progress has been made toward the growth of high performance HgCdTe devices by molecular beam epitaxy. Long wave infrared detectors operating at 9.9 μm at 78K exhibited a mean RoAo product of 1170 Ωcm2 at 0-fov. Very long wave infrared detectors operating at 14 μm at 78K exhibited a mean RoA product of 3.5 Ωcm2 at f/2 fov. These values represent the state-of-the- art for molecular beam epitaxially grown HgCdTe detectors.


Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Weixin Liu ◽  
Yiming Ma ◽  
Yuhua Chang ◽  
Bowei Dong ◽  
Jingxuan Wei ◽  
...  

Abstract Long-wave infrared (LWIR, 6–14 µm) processes enormous potential for chem/biosensing as it covers abundant molecular absorption fingerprints. Waveguides provide an attractive chip-scale miniaturization solution for optical sensors. However, the exploration of waveguide sensors in this wavelength range is limited. Here, an LWIR photonic platform for fast and sensitive on-chip gas sensing is developed using suspended silicon (Si) waveguide supported by subwavelength grating (SWG) metamaterial claddings. This platform provides a viable approach to fully exploit the transparency window of Si. The SWG structure provides a promising solution to engineer the mode profile for strong light–analyte interaction. Propagation loss and bending loss are studied in the broad wavelength range of 6.4–6.8 µm. Functional devices including grating couplers, Y-junctions, and directional couplers are also demonstrated with high performance. Sensing demonstration based on our platform is presented using toluene vapor detection as an example. The corresponding limit of detection reaches 75 ppm. The response and recovery time to 75 ppm toluene are about 0.8 and 3.4 s, respectively. This good performance makes our platform a promising candidate for on-site medical and environmental applications.


Sign in / Sign up

Export Citation Format

Share Document