DNA for the Assembly of Nanoelectronic Devices Biotechnology and Nanoelectronics

2005 ◽  
Author(s):  
Jie Liu ◽  
Mark W. Grinstaff
Keyword(s):  
Nanoelectronic Devices

scholarly journals Investigation of Band Alignment for Hybrid 2D-MoS2/3D-β-Ga2O3 Heterojunctions with Nitridation

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Ya-Wei Huan ◽  
Ke Xu ◽  
Wen-Jun Liu ◽  
Hao Zhang ◽  
Dmitriy Anatolyevich Golosov ◽  
...  
Keyword(s):  
Valence Band ◽  
Transition Metal Dichalcogenides ◽  
Three Dimensional ◽  
Optoelectronic Devices ◽  
Band Alignment ◽  
Band Offsets ◽  
Group Iii ◽  
Nanoelectronic Devices ◽  
Metal Dichalcogenides ◽  
Band Alignments

AbstractHybrid heterojunctions based on two-dimensional (2D) and conventional three-dimensional (3D) materials provide a promising way toward nanoelectronic devices with engineered features. In this work, we investigated the band alignment of a mixed-dimensional heterojunction composed of transferred MoS2 on β-Ga2O3($$ 2- $$2-01) with and without nitridation. The conduction and valence band offsets for unnitrided 2D-MoS2/3D-β-Ga2O3 heterojunction were determined to be respectively 0.43 ± 0.1 and 2.87 ± 0.1 eV. For the nitrided heterojunction, the conduction and valence band offsets were deduced to 0.68 ± 0.1 and 2.62 ± 0.1 eV, respectively. The modified band alignment could result from the dipole formed by charge transfer across the heterojunction interface. The effect of nitridation on the band alignments between group III oxides and transition metal dichalcogenides will supply feasible technical routes for designing their heterojunction-based electronic and optoelectronic devices.

The use of parameter optimization in the design of VLSI library cells and custom interfaces of nanoelectronic devices

2011 ◽  
Vol 40 (7) ◽  
pp. 473-475
Author(s):  
V. N. Perminov ◽  
S. V. Makarov ◽  
S. A. Kokin ◽  
A. E. Veselov
Keyword(s):  
Parameter Optimization ◽  
Nanoelectronic Devices

Sol–gel deposited xerogel, aerogel and porogen based porous low-k thin films: A comparative investigation

2021 ◽  
pp. 2140019
Author(s):  
Swati Gupta ◽  
Anil Gaikwad ◽  
Ashok Mahajan ◽  
Lin Hongxiao ◽  
He Zhewei
Keyword(s):  
Dielectric Constant ◽  
Sol Gel ◽  
Comparative Investigation ◽  
Crosstalk Noise ◽  
Nanoelectronic Devices ◽  
Low Dielectric ◽  
Interconnect Delay ◽  
Xerogel Films ◽  
Low K ◽  
Porosity Percentage

Low dielectric constant (Low-[Formula: see text]) films are used as inter layer dielectric (ILD) in nanoelectronic devices to reduce interconnect delay, crosstalk noise and power consumption. Tailoring capability of porous low-[Formula: see text] films attracted more attention. Present work investigates comparative study of xerogel, aerogel and porogen based porous low-[Formula: see text] films. Deposition of SiO2 and incorporation of less polar bonds in film matrix is confirmed using Fourier Transform Infra-Red Spectroscopy (FTIR). Refractive indices (RI) of xerogel, aerogel and porogen based low-[Formula: see text] films observed to be as low as 1.25, 1.19 and 1.14, respectively. Higher porosity percentage of 69.46% is observed for porogen-based films while for shrinked xerogel films, it is lowered to 45.47%. Porous structure of low-[Formula: see text] films has been validated by using Field Emission Scanning Electron Microscopy (FE-SEM). The pore diameters of porogen based annealed samples were in the range of 3.53–25.50 nm. The dielectric constant ([Formula: see text]) obtained from RI for xerogel, aerogel and porogen based films are 2.58, 2.20 and 1.88, respectively.

Power Withstanding Capability and Transient Temperature of Carbon Nanotube-Based Nano Electrical Interconnects

2021 ◽  
Author(s):  
Femi Robert
Keyword(s):  
Carbon Nanotube ◽  
Transient Analysis ◽  
Electronic Devices ◽  
Transient Temperature ◽  
Nanoelectronic Devices ◽  
Cu Interconnects ◽  
Electrical Interconnects ◽  
Steady State Temperature ◽  
The Given ◽  
The Continuum

Abstract This paper exhibits the electrothermal modelling and evaluation of Carbon Nanotube (CNT) based electrical interconnects for electronic devices. The continuum model of the CNT is considered and the temperature across interconnect is predicted for the given power. Finite element modelling software COMSOL Multiphysics is used to carry out the simulations. The results are compared with Al and Cu interconnects. An electrothermal analysis is also carried out to obtain the temperature for the given power for Single-Walled CNT, Double-Walled CNT, Triple-Walled CNT, and Multi-Walled CNT. Results show that the CNT interconnects performs better when compared to Al and Cu interconnects. The power withstanding capability of CNT is 68.75 times more than Al and 32.35 times more than Cu. Based on the transient analysis, the time taken by the CNT interconnects to reach a steady temperature is obtained as 0.007 ns. On the application of power, Cu and Al interconnects takes 0.1 ns to reach the steady-state temperature. The nanostructured CNT based electrical interconnects would play a considerable role in replacing Cu and Al electrical interconnect applications for micro and nanoelectronic devices.

scholarly journals Nanoelectronic Devices Based on Carbon Nanotubes

2015 ◽  
Vol 7 (1) ◽  
pp. 53-62 ◽  
Author(s):  
Victor Dmitriev ◽  
Fernando Gomes ◽  
Clerisson Nascimento
Keyword(s):  
Carbon Nanotubes ◽  
Nanoelectronic Devices
Sign in / Sign up

Export Citation Format

Share Document