BOUNDARY SIMULATION PARAMETERS FOR UNDEREXPANDED JETS IN A QUIESCENT ATMOSPHERE

1965 ◽  
Author(s):  
M. Pindzola
Keyword(s):  
Underexpanded Jets ◽  
Simulation Parameters

Sensitivity Analysis and Selection of Check Index of Signal Intersection Simulation Model Based on VISSIM

2019 ◽  
Vol 2 (5) ◽  
Author(s):  
Mengda Zhang ◽  
Chenjing Zhou ◽  
Tian-tian Zhang ◽  
Yan Han
Keyword(s):  
Sensitivity Analysis ◽  
Simulation Model ◽  
Optimal Process ◽  
Parameter Calibration ◽  
Index Set ◽  
The Core ◽  
Core Module ◽  
Simulation Parameter ◽  
Simulation Parameters ◽  
Selection Of

Selecting check index quantitatively is the core of the calibration of micro traffic simulation parameters at signal intersection. Five indexes in the node (intersection) module of VISSIM were selected as the check index set. Twelve simulation parameters in the core module were selected as the simulation parameters set. Optimal process of parameter calibration was proposed and model of the intersection of Huangcun west street and Xinghua street in Beijing was built in VISSIM to verify it. The sensitivity analysis between each check index and simulation parameter in their own set was conducted respectively. Sensitive parameter sets of different check indices were obtained and compared. The results show that different indexes have different size of set, and average vehicle delay's is maximum, so it's necessary to select index quantitatively. The results can provide references for scientific selection of the check indexes and improve the study efficiency of parameter calibration.

scholarly journals Research of reliability and efficiency of technological processes of mechanical assembly production on the basis of the common semi-Markov model

2018 ◽  
Vol 224 ◽  
pp. 01138
Author(s):  
Yuri Rapatskiy ◽  
Mikhail Zamorenov ◽  
Vadim Kopp ◽  
Yuri Obzherin ◽  
Vladimir Gusev ◽  
...  
Keyword(s):  
Distribution Functions ◽  
Mechanical Assembly ◽  
Renewal Equations ◽  
Technological Processes ◽  
Threaded Connections ◽  
Proposed Model ◽  
The Common ◽  
Semi Markov Processes ◽  
Simulation Parameters ◽  
Assembly Production

In the article a common semi-Markov mathematical model is considered that allows one to investigate the productivity and reliability of various technological processes of mechanical assembly production. The proposed model allows to study, inter alia, technological processes of manufacturing parts with screw and assemblies of threaded connections. Mathematical apparatus of the research is the theory of semi-Markov processes with a common phase space, which operates with a common kind of random variables distribution functions. If the considering process in the system is a subsystem located on a higher level of hierarchy, the hierarchical model for compatibility with each other levels as output simulation parameters required distribution functions. In the proposed model, based on the decision of the Markov renewal equations depend not only on the torque characteristics, but also the distribution function of time per unit of output service according to different kinds of undervalued failures.

Accurate profile simulation parameters in BF/sub 2/ implants in pre-amorphized silicon

1989 ◽  
Vol 36 (1) ◽  
pp. 149-152 ◽  
Author(s):  
A.F. Tasch ◽  
H. Shin ◽  
C. Park ◽  
J. Alvis ◽  
S. Novak ◽  
...  
Keyword(s):  
Simulation Parameters

Simulation and Experimental Analysis of the Infrared Detection for Surface Cracks of Metal Pipes with Penetration Treatment

2015 ◽  
Vol 719-720 ◽  
pp. 238-242
Author(s):  
Xiong Wan
Keyword(s):  
Crack Detection ◽  
Detection Sensitivity ◽  
Infrared Detection ◽  
Thermal Excitation ◽  
Surface Cracks ◽  
Pipe Model ◽  
Long Time ◽  
Metal Pipes ◽  
Transient Thermal ◽  
Simulation Parameters

Working in the corrosive environment for a long time, it is easy for metal pipes to produce stress corrosion cracks which will affect the use. An infrared detection method combining permeate treatment with heat-incentive steam is proposed to detect surface cracks, which then has been verified by simulations and experiments. For the simulation, pipe model including four cracks of different depth and width was constructed by ANSYS. Transient thermal analysis was made after convection incentive loaded on internal and external wall in the case of whether or not undergo surface infiltration processing. For the experiment, pipe including cracks were made the same as simulation parameters, then experiments were made using the thermal excitation system in two cases. Surface temperature distributions of the pipe were compared in two cases, the results of the study show that penetration treatment before heat incentive can significantly improve the surface crack detection sensitivity.

Sign in / Sign up

Export Citation Format

Share Document