Simulating the Impact of Faults on CO2 Sequestration and Enhanced Oil Recovery in Sandstone Aquifers

Author(s):  
S.M. Pasala ◽  
C.B. Forster ◽  
S.J. Lim ◽  
M.D. Deo
2021 ◽  
pp. 79-90
Author(s):  
Т. A. Pospelova

The article discusses ways to increase the oil recovery factor in already developed fields, special attention is paid to the methods of enhanced oil recovery. The comparative structure of oil production in Russia in the medium term is given. The experience of oil and gas companies in the application of enhanced oil recovery in the fields is analyzed and the dynamics of the growth in the use of various enhanced oil recovery in Russia is estimated. With an increase in the number of operations in the fields, the requirements for the selection of candidates inevitably increase, therefore, the work focuses on hydrodynamic modeling of physical and chemical modeling, highlights the features and disadvantages of existing simulators. The main dependences for adequate modeling during polymer flooding are given. The calculation with different concentration of polymer solution is presented, which significantly affects the water cut and further reduction of operating costs for the preparation of the produced fluid. The possibility of creating a specialized hydrodynamic simulator for low-volume chemical enhanced oil recovery is considered, since mainly simulators are applicable for chemical waterflooding and the impact is on the formation as a whole.


2018 ◽  
Vol 3 (44) ◽  
pp. 12461-12468
Author(s):  
Lei Jiang ◽  
Jingtao Sun ◽  
Jiqian Wang ◽  
Qi Xue ◽  
Songyan Li ◽  
...  

2014 ◽  
Vol 63 ◽  
pp. 7685-7693 ◽  
Author(s):  
Zhenxue Dai ◽  
Hari Viswanathan ◽  
Julianna Fessenden-Rahn ◽  
Richard Middleton ◽  
Feng Pan ◽  
...  

2017 ◽  
Vol 114 ◽  
pp. 6957-6967 ◽  
Author(s):  
Zhenxue Dai ◽  
Hari Viswanathan ◽  
Ting Xiao ◽  
Richard Middleton ◽  
Feng Pan ◽  
...  

Fuel ◽  
2020 ◽  
Vol 280 ◽  
pp. 118512 ◽  
Author(s):  
Tatiana Oliveira do Vale ◽  
Roberta Santoro de Magalhães ◽  
Paulo Fernando de Almeida ◽  
Josilene Borges Torres Lima Matos ◽  
Fábio Alexandre Chinalia

2021 ◽  
Author(s):  
Chukwunonso Uche ◽  
Samuel Esieboma ◽  
Jennifer Uche ◽  
Ibrahim Bukar

Abstract An evaluation of potential EOR processes applicable in the marginal oil field operation of the Niger Delta region is presented. Technical feasibility, process availability, oil recovery potential, and other uncertainties and risks associated with exploitation of enhanced oil recovery technique in a marginal oil field environment are being assessed. Few Enhanced oil recovery processes, namely polymer flooding, chemical flooding and microbial EOR (MEOR), are considered for possible application in this marginal oil field. The objective of the screening study is to evaluate and rank the EOR options and also select the most attractive method that will have to be further chased to a pilot test stage. Emphasis is strictly on a technical assessment of the incremental oil potential of each of the EOR methods and also identification of critical operational and logistical components of the entire process for their implementation in the offshore operating environment. Recoverable volumes associated with EOR may be significant, but key project development and implementation challenges and extra cost elements must be considered in any EOR forecast for an effective EOR process ranking. Some of these concerns (e.g. Polymer/chemical supply, facilities requirements, and the impact of EOR on reservoir performance and wellbore integrity) may be significant enough to eliminate a method from being considered further and at that point the best EOR option that requires minimal cost exposure for achieving the best recoverable shall be considered. Moreso, there is consideration of the quantity and quality of laboratory data that should support the viability of each EOR process being considered. This paper narrates the state of technical readiness for field implementation of each EOR method and identifies remaining work required to progress EOR process in this marginal oil field.


2021 ◽  
Author(s):  
Bogdan-George Davidescu ◽  
Mathias Bayerl ◽  
Christoph Puls ◽  
Torsten Clemens

Abstract Enhanced Oil Recovery pilot testing aims at reducing uncertainty ranges for parameters and determining operating conditions which improve the economics of full-field deployment. In the 8.TH and 9.TH reservoirs of the Matzen field, different well configurations were tested, vertical versus horizontal injection and production wells. The use of vertical or horizontal wells depends on costs and reservoir performance which is challenging to assess. Water cut, polymer back-production and pressures are used to understand reservoir behaviour and incremental oil production, however, these data do not reveal insights about changes in reservoir connectivity owing to polymer injection. Here, we used consecutive tracer tests prior and during polymer injection as well as water composition to elucidate the impact of various well configurations on sweep efficiency improvements. The results show that vertical well configuration for polymer injection and production leads to substantial acceleration along flow paths but less swept volume. Polymer injection does not only change the flow paths as can be seen from the different allocation factors before and after polymer injection but also the connected flow paths as indicated by a change in the skewness of the breakthrough tracer curves. For horizontal wells, the data shows that in addition to acceleration, the connected pore volume after polymer injection is substantially increased. This indicates that the sweep efficiency is improved for horizontal well configurations after polymer injection. The methodology leads to a quantitative assessment of the reservoir effects using different well configurations. These effects depend on the reservoir architecture impacting the changes in sweep efficiency by polymer injection. Consecutive tracer tests are an important source of information to determine which well configuration to be used in full-field implementation of polymer Enhanced Oil Recovery.


2021 ◽  
Author(s):  
Da Zhu ◽  
Mohan Sivagnanam ◽  
Ian Gates

Abstract Supersonic gas injection can help deliver gas uniformly to a reservoir, regardless of reservoir conditions. This technology has played a key role in enhanced oil recovery (EOR) and in particular, thermal enhanced oil recovery operations. Most previous studies have focused on single phase gas injection whereas in most field applications, multiphase and multicomponent situations occur. In the research documented in this paper, we report on results of evaluations of compressible multiphase supersonic gas flows in which gas is the continuous phase is seeded with dispersed liquid droplets or solid particles. Theoretical derivation and numerical simulations with and without relative motions between continuous and disperse phases are examined first. The results illustrate that the shock wave structures and flow properties associated with the multiphase gas flows are different than that of single-phase isentropic flows. The existence and importance of relaxation zones after the normal shock wave in multiphase flow is described. Numerical computational fluid dynamics (CFD) simulations are conducted to show how the multiphase multicomponent flow affects gas phase injection under different conditions. The impact of solid/liquid mass loading on flow performance is discussed. Finally, the practical application of the findings is discussed.


Sign in / Sign up

Export Citation Format

Share Document