Achieving Low Cost Operation in Mature Oil Fields

2000 ◽  
Author(s):  
Imelda Pasni ◽  
Ignatius T. Wibowo
Keyword(s):  
Low Cost ◽  
Oil Fields

Sucker Rod Antibuckling System: Development and Field Application

2021 ◽  
pp. 1-16
Author(s):  
Clemens Langbauer ◽  
Rudolf Konrad Fruhwirth ◽  
Lukas Volker
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Cost Optimization ◽  
Field Application ◽  
Oil Field ◽  
Oil Fields ◽  
Test Facility ◽  
System Efficiency ◽  
Pumping System ◽  
Sucker Rod

Summary When the oil price is low, cost optimization is vital, especially in mature oil fields. Reducing lifting costs by increasing the mean time between failure and the overall system efficiency helps to keep wells economical and increase the final recovery factor. A significant portion of artificially lifted wells currently use sucker rod pumping systems. Although its efficiency is in the upper range, there is still room for improvement compared with other artificial-liftsystems. This paper presents the field-tested sucker rod antibuckling system (SRABS), which prevents buckling of the entire sucker rod string, achieved by a redesign of the standing valve, the advantageous use of the dynamic liquid level, and, on a case-by-case basis, application of a tension element. The system allows full buckling prevention and a reduction of the overall stresses in the sucker rod string. The resulting reduction in the number of well interventions combined with the higher system efficiency prolongs economic production in mature oil fields, even in times of low oil prices. The analysis of SRABS, using finite-element simulations, showed a significant increase in system efficiency. The SRABS performance and wear tests under large-scale conditions were performed at Montanuniversität Leoben’s Pump Test Facility and in the oil field. The results of intensive laboratory testing were used to optimize the pump-body geometry and improve the wear resistance by selecting optimal materials for the individual pump components. The ongoing field-test evaluation confirmed the theoretical approach and showed the benefits achieved by using SRABS. SRABS itself can be applied within every sucker rod pumping system; the installation is as convenient as a standard pump, and manufacturing costs are comparable with those of a standard pump. This paper shows improved performance of the SRABS pumping system compared with a standard sucker rod pump. SRABS is one of the first systems that prevents the sucker rod string from buckling without any additional equipment, such as sinker bars. Testing of SRABS has identified significant benefits compared with standard sucker rod pumps.

Bioremediation of Petroleum Contaminated Soil

2012 ◽  
Vol 550-553 ◽  
pp. 1248-1252
Author(s):  
Rui Dan Xu
Keyword(s):  
Contaminated Soil ◽  
Sole Carbon Source ◽  
Oil Content ◽  
Degradation Rate ◽  
Low Cost ◽  
Oil Fields ◽  
Degrading Bacteria ◽  
Petroleum Contaminated Soil ◽  
Immobilized Microorganisms ◽  
Degradation Ability

Two kinds of polyacrylamide(HPAM)-degrading bacteria S1, S2, which can use HPAM as only nitrogen source and the sole carbon source, were isolated from petroleum-contaminated soil of Daqing Oilfield. The bioremediation for treating petroleum contaminated soil by immobilized microorganisms can improve the effect on biodegradation for pollutants in oil fields and reduce the loss of bacteria. The degradation ability of five kinds of embedding immobilization methods on soil pollutant was investigated. The experimental results showed that the immobilized microbial granules, which used polyvinyl alcohols (PVA) and sodium alginate as coagulant, activated carbon as coagulant-support, exhibited good mechanical strength, operated easily, be not breakable and low cost. Experiments results showed that after treatment using this kind of immobilized microbial granules, the HPAM concentration declined from 500 mg•L-1 to 102 mg•L-1 in 48 hours. The degradation rate of HPAM reached 79.6%. At the same time crude oil content decreased from 733.21 mg•L-1 to 9.5 mg•L-1. These immobilized microbial granules can remove 98.7% oil from the petroleum-contaminated soil in 48 hours.

Achieving Low-Cost Operation in Mature Oil Fields

2001 ◽  
Vol 53 (04) ◽  
pp. 52-54
Author(s):  
Dennis Denney
Keyword(s):  
Low Cost ◽  
Oil Fields

Decomposition of the metastable beta titanium alloy Ti-15-3

1983 ◽  
Vol 41 ◽  
pp. 264-265
Author(s):  
Y. L. Chen ◽  
S. Fujlshiro
Keyword(s):  
Low Cost ◽  
High Strength ◽  
Alpha Phase ◽  
Thick Sheet ◽  
Omega Phase ◽  
Beta Titanium Alloy ◽  
Beta Titanium ◽  
Beta Matrix ◽  
Metastable Beta ◽  
Very High

Metastable beta titanium alloys have been known to have numerous advantages such as cold formability, high strength, good fracture resistance, deep hardenability, and cost effectiveness. Very high strength is obtainable by precipitation of the hexagonal alpha phase in a bcc beta matrix in these alloys. Precipitation hardening in the metastable beta alloys may also result from the formation of transition phases such as omega phase. Ti-15-3 (Ti-15V- 3Cr-3Al-3Sn) has been developed recently by TIMET and USAF for low cost sheet metal applications. The purpose of the present study was to examine the aging characteristics in this alloy.The composition of the as-received material is: 14.7 V, 3.14 Cr, 3.05 Al, 2.26 Sn, and 0.145 Fe. The beta transus temperature as determined by optical metallographic method was about 770°C. Specimen coupons were prepared from a mill-annealed 1.2 mm thick sheet, and solution treated at 827°C for 2 hr in argon, then water quenched. Aging was also done in argon at temperatures ranging from 316 to 616°C for various times.

Chromic Acid Etching of Polyethylene

1973 ◽  
Vol 31 ◽  
pp. 72-73
Author(s):  
J. D. Muzzy ◽  
R. D. Hester ◽  
J. L. Hubbard
Keyword(s):  
Chromic Acid ◽  
Low Cost ◽  
Acid Etching ◽  
Crystalline Morphology ◽  
Bulk Specimen ◽  
Morphological Studies ◽  
Perfect Form ◽  
Molecular Length ◽  
Lamellar Texture ◽  
Cost Studies

Polyethylene is one of the most important plastics produced today because of its good physical properties, ease of fabrication and low cost. Studies to improve the properties of polyethylene are leading to an understanding of its crystalline morphology. Polyethylene crystallized by evaporation from dilute solutions consists of thin crystals called lamellae. The polyethylene molecules are parallel to the thickness of the lamellae and are folded since the thickness of the lamellae is much less than the molecular length. This lamellar texture persists in less perfect form in polyethylene crystallized from the melt.Morphological studies of melt crystallized polyethylene have been limited due to the difficulty of isolating the microstructure from the bulk specimen without destroying or deforming it.

Glass Knife Geometry as Seen by the SEM

1971 ◽  
Vol 29 ◽  
pp. 454-455
Author(s):  
J. Temple Black
Keyword(s):  
Low Cost ◽  
Amorphous Material ◽  
Stress Concentrations ◽  
Basic Tool ◽  
Tool Materials ◽  
Optical Inspection ◽  
Surface Flaws ◽  
Slip Planes ◽  
Glass Knife ◽  
Diamond Knife

In ultramicrotomy, the two basic tool materials are glass and diamond. Glass because of its low cost and ease of manufacture of the knife itself is still widely used despite the superiority of diamond knives in many applications. Both kinds of knives produce plastic deformation in the microtomed section due to the nature of the cutting process and microscopic chips in the edge of the knife. Because glass has no well defined slip planes in its structure (it's an amorphous material), it is very strong and essentially never fails in compression. However, surface flaws produce stress concentrations which reduce the strength of glass to 10,000 to 20,000 psi from its theoretical or flaw free values of 1 to 2 million psi. While the microchips in the edge of the glass or diamond knife are generally too small to be observed in the SEM, the second common type of defect can be identified. This is the striations (also termed the check marks or feathers) which are always present over the entire edge of a glass knife regardless of whether or not they are visable under optical inspection. These steps in the cutting edge can be observed in the SEM by proper preparation of carefully broken knives and orientation of the knife, with respect to the scanning beam.

Spectraplot: A PC-based spectrum translation and display program

1988 ◽  
Vol 46 ◽  
pp. 918-919
Author(s):  
H. O. Colijn
Keyword(s):  
Low Cost ◽  
Transfer Program ◽  
File Transfer ◽  
Transfer Data ◽  
Error Checking ◽  
Data Files ◽  
The University

Many labs today wish to transfer data between their EDS systems and their existing PCs and minicomputers. Our lab has implemented SpectraPlot, a low- cost PC-based system to allow offline examination and plotting of spectra. We adopted this system in order to make more efficient use of our microscopes and EDS consoles, to provide hardcopy output for an older EDS system, and to allow students to access their data after leaving the university.As shown in Fig. 1, we have three EDS systems (one of which is located in another building) which can store data on 8 inch RT-11 floppy disks. We transfer data from these systems to a DEC MINC computer using “SneakerNet”, which consists of putting on a pair of sneakers and running down the hall. We then use the Hermit file transfer program to download the data files with error checking from the MINC to the PC.

Sign in / Sign up

Export Citation Format

Share Document