Drilling Fluid Filtration Under Stimulated Downhole Conditions

1974 ◽  
Author(s):  
Jay P. Simpson
Keyword(s):  
Drilling Fluid ◽  
Fluid Filtration

Factors Affecting Well Productivity - I. Drilling Fluid Filtration

10.2118/720-g ◽  
1957 ◽  
Vol 210 (01) ◽  
pp. 126-131
Author(s):  
E.E. Glenn ◽  
M.L. Slusser ◽  
J.L. Huitt
Keyword(s):  
Drilling Fluid ◽  
Fluid Filtration ◽  
Well Productivity ◽  
Factors Affecting

Bentonite Suspension Filtration and its Electro-Kinetics in the Presence of Additives

2021 ◽  
Vol 58 (2) ◽  
pp. 121-126
Author(s):  
R. M. Farag ◽  
A. M. Salem ◽  
A. A. El-Midany ◽  
S. E. El-Mofty
Keyword(s):  
Zeta Potential ◽  
Rheological Properties ◽  
Electrostatic Interactions ◽  
Drilling Fluid ◽  
Colloidal Suspensions ◽  
Drilling Fluids ◽  
Fluid Filtration ◽  
Filtration Loss ◽  
Suspension Filtration ◽  
The Stability

Abstract Invasion of fluids into porous media during drilling can lead to irreparable damage and reduced well productivity. Hence, minimizing the filtration loss of the drilling fluid into the formation is very important. The stability of colloidal suspensions plays a crucial role in controlling the interfacial forces and consequently on minimizing the filtration. The zeta potential is an indicator of the stability of colloids with respect to their electrostatic interactions. In this study, the rheological properties of bentonite suspensions are investigated with and without additives. The starch and CMC were used as additives to enhance the rheological properties of bentonite. The effects of these additives on the drilling fluid filtration were examined. Zeta-potential, viscosity, gel strength and yield point were measured to characterize the extent to which control of the filtration loss of the drilling fluids can be achieved. The zeta-potential and the amount of filtration loss of water-bentonite suspensions were correlated. Finally, the results showed that the addition of either starch or carboxymethyl cellulose (CMC) enhances the filtration properties of water-bentonite suspensions.

Synthesis and properties of acrylamide 2-acrylamido-2-methypropane sulfonic acid sodium styrene sulfonate N-vinyl pyrrolidone quadripolymer and its reduction of drilling fluid filtration at high temperature and high salinity

2014 ◽  
Vol 34 (2) ◽  
pp. 125-131 ◽  
Author(s):  
Zhijun Li ◽  
Xiaolin Pu ◽  
Huaizhi Tao ◽  
Lu Liu ◽  
Junlin Su
Keyword(s):  
Network Structure ◽  
Sulfonic Acid ◽  
Drilling Fluid ◽  
Salt Resistance ◽  
Vinyl Pyrrolidone ◽  
Drilling Fluids ◽  
Fluid Filtration ◽  
Styrene Sulfonate ◽  
Sodium Styrene Sulfonate ◽  
Redox Initiator

Abstract Acrylamide (AM), 2-acrylamido-2-methypropane sulfonic acid, sodium styrene sulfonate (SSS), and N-vinyl pyrrolidone (NVP) monomers were copolymerized via a redox initiator system to synthesize a quadripolymer capable of reducing drilling fluid filtration. Fourier transform infrared spectroscopy (FT-IR) was used to determine the molecular structure of the product, confirming its successful synthesis. The effects of the copolymer on the properties and salt resistance of drilling fluid are discussed. The adsorption of the copolymer on bentonite was also studied using atomic force microscopy (AFM). The copolymer reduced the filtration of drilling fluids of various salinities before and after aging at 200°C; at room temperature, the copolymer was adsorbed uniformly across the bentonite surface at low concentration. As its concentration increased, the distributed polymer spread and connected to form a network. After aging for 16 h at 200°C, the copolymer could still adsorb to bentonite and maintained its network structure. Sodium ions induced the coalescence of the copolymer, damaging its network structure.

scholarly journals A Combined Barite–Ilmenite Weighting Material to Prevent Barite Sag in Water-Based Drilling Fluid

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1945 ◽  
Author(s):  
Salem Basfar ◽  
Abdelmjeed Mohamed ◽  
Salaheldin Elkatatny ◽  
Abdulaziz Al-Majed
Keyword(s):  
Rheological Properties ◽  
Base Fluid ◽  
Drilling Fluid ◽  
Fluid Density ◽  
Fluid Filtration ◽  
Dynamic Conditions ◽  
Filtration Performance ◽  
Water Based ◽  
Static Conditions ◽  
The Impact

Barite sag is a serious problem encountered while drilling high-pressure/high-temperature (HPHT) wells. It occurs when barite particles separate from the base fluid leading to variations in drilling fluid density that may cause a serious well control issue. However, it occurs in vertical and inclined wells under both static and dynamic conditions. This study introduces a combined barite–ilmenite weighting material to prevent the barite sag problem in water-based drilling fluid. Different drilling fluid samples were prepared by adding different percentages of ilmenite (25, 50, and 75 wt.% from the total weight of the weighting agent) to the base drilling fluid (barite-weighted). Sag tendency of the drilling fluid samples was evaluated under static and dynamic conditions to determine the optimum concentration of ilmenite which was required to prevent the sag issue. A static sag test was conducted under both vertical and inclined conditions. The effect of adding ilmenite to the drilling fluid was evaluated by measuring fluid density and pH at room temperature, and rheological properties at 120 °F and 250 °F. Moreover, a filtration test was performed at 250 °F to study the impact of adding ilmenite on the drilling fluid filtration performance and sealing properties of the formed filter cake. The results of this study showed that adding ilmenite to barite-weighted drilling fluid increased fluid density and slightly reduced the pH within the acceptable pH range (9–11). Ilmenite maintained the rheology of the drilling fluid with a minimal drop in rheological properties due to the HPHT conditions, while a significant drop was observed for the base fluid (without ilmenite). Adding ilmenite to the base drilling fluid significantly reduced sag factor and 50 wt.% ilmenite was adequate to prevent solids sag in both dynamic and static conditions with sag factors of 0.33 and 0.51, respectively. Moreover, HPHT filtration results showed that adding ilmenite had no impact on filtration performance of the drilling fluid. The findings of this study show that the combined barite–ilmenite weighting material can be a good solution to prevent solids sag issues in water-based fluids; thus, drilling HPHT wells with such fluids would be safe and effective.

Synthesis and properties of high temperature resistant and salt tolerant filtrate reducer N,N-dimethylacrylamide 2-acrylamido-2-methyl-1-propyl dimethyl diallyl ammonium chloride N-vinylpyrrolidone quadripolymer

2015 ◽  
Vol 35 (7) ◽  
pp. 627-635 ◽  
Author(s):  
Zhengguo Zhao ◽  
Xiaolin Pu ◽  
Luo Xiao ◽  
Gui Wang ◽  
Junlin Su ◽  
...  
Keyword(s):  
Ammonium Chloride ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Good Effect ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Chemical Compositions ◽  
Scanning Calorimetry ◽  
Fluid Filtration ◽  
Good Thermal Stability

Abstract N,N-dimethylacrylamide (DMAA), 2-acrylamido-2-methyl-1-propyl (AMPS), dimethyl diallyl ammonium chloride (DMDAAC) and N-vinylpyrrolidone (NVP) monomers were copolymerized to synthesize a zwitterionic copolymer filtrate reducer. The results of Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) indicated that the molecular structure and chemical compositions of the quadripolymer matched with the design, and the result of the differential scanning calorimetry (DSC)-thermogravimetric analysis (TGA) showed that the polymer had good thermal stability. The effects of the quadripolymer on the properties and salt tolerance of drilling fluids were investigated. The environmental scanning electron microscope (ESEM) was used to observe the microstructure of the DMAA/AMPS/DMDAAC/NVP quadripolymer-bentonite system and filter cake of the drilling fluid added the copolymer. Results showed that a one space grid structure was formed by the molecular film with a hydrophobic association effect and electrostatic interaction between the groups in the positive and negative charges of the quadripolymer. It adsorbed and coated clay particles, and kept the particles distributing multilevels which contributed to forming a compact filter cake to reduce fluid loss. The spatial structure of the quadripolymer in drilling fluid could be destroyed partly by high temperatures, sodium and calcium, but the polymer still had a good effect on reducing fluid filtration.

Experimental Study of Drilling Fluid's Filtration and Mud Cake Evolution in Sandstone Formations

2017 ◽  
Vol 139 (2) ◽  
Author(s):  
C. P. Ezeakacha ◽  
S. Salehi ◽  
A. Hayatdavoudi
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Field Application ◽  
Fluid Loss ◽  
Electron Microscopic ◽  
Fluid Filtration ◽  
Significant Difference

In real time drilling, the complexity of drilling fluid filtration is majorly attributed to changing mud rheology, formation permeability, mud particle size distribution (PSD), filter cake plastering effects, and geochemical reaction of particles at geothermal conditions. This paper focuses on quantifying the major effects as well as revealing their contribution toward effective wellbore stabilization in sandstone formations. We conducted an extensive experimental and analytical study on this subject at different levels. First, we used field application and the results as guides for our experiments. We have considered both oil-based mud and water-based mud. Next, we optimized the mud particle size distribution (PSD) by carefully varying the type, size, and concentration of wellbore strengthening material (WSM). Laboratory high pressure high temperature fluid loss tests were carried out on Michigan and Bandera Brown sandstones. The results from these tests identify the formation heterogeneity and permeability in successful wellbore stabilization. Filter cake permeability calculations, using the analytical model for linear systems, were consistent with filtration rates, and the expected trend of permeability declines with time. Finally, we investigated the evolution of internal filter cake and plastering mechanism, using scanning electron microscopic (SEM) analysis. The test results revealed a significant difference in the formation permeability impairment for the optimal mud PSD and WSM blend.

A Simplified Methodology for Dynamic Drilling Fluid Filtration Estimation Considering Mudcake Compressibility

2014 ◽  
Author(s):  
L. A. Calcada ◽  
C. M. Scheid ◽  
N. D. Calabrez ◽  
A.T.A. Waldmann ◽  
A. L. Martins
Keyword(s):  
Drilling Fluid ◽  
Fluid Filtration

scholarly journals Study on the Law of Membrane Efficiency of Unsaturated Shale and Its Application

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Long Chang ◽  
Hongkui Ge ◽  
Yinghao Shen ◽  
Zehui Huang ◽  
Qian Zhang
Keyword(s):  
Water Saturation ◽  
Drilling Fluid ◽  
Interaction Mechanism ◽  
Solute Concentration ◽  
Exchange Capacity ◽  
Excess Charge ◽  
Initial Water ◽  
Fluid Filtration ◽  
Chemical Osmosis ◽  
Filtration Loss

The microscopic interaction mechanism between working fluids and shale reservoirs is the key basic issue for the efficient development of shale gas. The initial water saturation of clay-rich shale is low, and the water absorption through strong chemical osmosis is an important factor for the wellbore instability of the drilling fluid filtration loss and the low flowback rate of hydraulic fracturing. Membrane efficiency is a key parameter in evaluating the mechanical-chemical coupling of shale-fluid interaction. Because microcracks develop in reservoir shale, pressure transfer experiments are no longer capable of obtaining membrane efficiency value. In this paper, the characteristics of shale water saturation are considered. The model calculating membrane efficiency is obtained, and the shale membrane efficiency of the reservoir studied, based on the triple-layer model of clay mineral-water interface electrochemistry. Membrane efficiency of unsaturated shale depends on the excess charge density of the surface of the solid in different water saturations. The analysis of factors influencing shale membrane efficiency in unsaturated reservoirs shows that the shale membrane efficiency decreases with the increase of water saturation under unsaturated conditions. The partition coefficient of counterion in the Stern layer, cation exchange capacity, and solute concentration in pore fluid will affect the membrane efficiency of unsaturated shale. The membrane efficiency of the reservoir section shale in Fuling area is calculated and analyzed, and the water-absorbing capacity by chemical osmosis of the reservoir interval shale is evaluated based on the membrane efficiency model of unsaturated shale.

scholarly journals Experimental investigation of fluid loss and cake thickness control ability of zirconium (IV) oxide (Z_R O_2) nanoparticles in water based drilling mud.

2018 ◽  
Vol 7 (2) ◽  
pp. 702 ◽  
Author(s):  
Anawe A. L. Paul ◽  
Folayan J. Adewale
Keyword(s):  
Drilling Fluid ◽  
Fluid Loss ◽  
Effective Diameter ◽  
Oil Well ◽  
Drilling Mud ◽  
Filtration Problem ◽  
Fluid Filtration ◽  
Well Drilling ◽  
Cake Thickness ◽  
Water Based

A major technical and economical concern of the oil well drilling industry is the potential damage to productive formations because of excessive drilling fluid filtration and its multiplier effect on cake thickness. High fluid loss (high cake permeability) results in thick filter cake which reduces the effective diameter of the hole (tight holes) and causes various problems such as excessive torque when rotating the pipe, excessive drag when pulling it and high swab and surge pressures due to reduced hole diameter and differential pipe sticking due to increase in pipe contact.It is in this light that the potential of Zirconium (IV) oxide (Z_r O_2) nanoparticles in combating excessive filtration problem in Water Based Mud was investigated. Preliminary results show that addition of 0.50g (Z_r O_2) nanoparticle concentration brought about 19.10% reduction in fluid loss and 14.29 % reduction in cake thickness for the High Temperature/ High Pressure (HPHT) filtration test at 500psi and 250 OF. Similarly, the highest reduction of 48.31% and 38.10% in fluid loss and cake thickness respectively was achieved with addition of an optimum concentration of 2.0g of (Z_r O_2) nanoparticles for the HTHP filtration test at the same temperature and pressure.

Sign in / Sign up

Export Citation Format

Share Document