An Integrated Method for Optimizing Hydraulic Fracture Design for Tight Gas Wells

1998 ◽  
Author(s):  
Noel D. Rietman
Keyword(s):  
Hydraulic Fracture ◽  
Tight Gas ◽  
Gas Wells ◽  
Integrated Method

A New Approach for Reliable Estimation of Hydraulic Fracture Properties Using Elliptical Flow Data in Tight Gas Wells

2009 ◽  
Vol 12 (02) ◽  
pp. 254-262 ◽  
Author(s):  
Yueming Cheng ◽  
W. John Lee ◽  
Duane A. McVay
Keyword(s):  
Hydraulic Fracture ◽  
Finite Conductivity ◽  
Tight Gas ◽  
Well Test ◽  
Pressure Data ◽  
Gas Wells ◽  
New Approach ◽  
Fracture Properties ◽  
Elliptical Flow ◽  
Half Length

Summary Gas wells in low-permeability formations usually require hydraulic fracturing to be commercially viable. Pressure transient analysis in hydraulically fractured tight gas wells is commonly based on analysis of three flow regimes: bilinear, linear, and pseudoradial. Without the presence of pseudoradial flow, neither reservoir permeability nor fracture half-length can be independently estimated. In practice, as pseudoradial flow is often absent, the resulting estimation is uncertain and unreliable. On the other hand, elliptical flow, which exists between linear flow and pseudoradial flow, is of long duration (typically months to years). We can acquire much rate and pressure data during this flow regime, but no practical well test analysis technique is currently available to interpret these data. This paper presents a new approach to reliably estimate reservoir and hydraulic fracture properties from analysis of pressure data obtained during the elliptical flow period. The method is applicable to estimate fracture half-length, formation permeability, and skin factor independently for both infinite- and finite-conductivity fractures. It is iterative and features rapid convergence. The method can estimate formation permeability when pseudoradial flow does not exist. Coupled with stable deconvolution technology, which converts variable production-rate and pressure measurements into an equivalent constant-rate pressure drawdown test, this method can provide fracture-property estimates from readily available, noisy production data. We present synthetic and field examples to illustrate the procedures and demonstrate the validity and applicability of the proposed approach.

No Need for Radio Active Tracer When Mother Nature Helps Detecting the Effective Hydraulic Fracture Height

2022 ◽  
Author(s):  
Rinat Lukmanov ◽  
Said Jabri ◽  
Ehab Ibrahim
Keyword(s):  
Hydraulic Fracture ◽  
Natural Radioactivity ◽  
Gamma Ray ◽  
Fracture Propagation ◽  
Radioactive Isotopes ◽  
Main Element ◽  
Tight Gas ◽  
Well Test ◽  
Gas Reservoirs ◽  
Fracture Height

Abstract The tight gas reservoirs of Haima Supergroup provide the majority of gas production in the Sultanate of Oman. The paper discusses a possibility of using the anomalies from natural radioactivity to evaluate the fracture height for complex tight gas in mature fields of Oman. The standard industry practice is adding radioactive isotopes to the proppant. Spectral Gamma Ray log is used to determine near wellbore traced proppant placement. Spectral Noise log in combination with Production logs helps to identify the active fractures contributing to production. These methods complement each other, but they are obviously associated with costs. Hence, majority of wells are fracced without tracers or any other fracture height diagnostics. However, in several brown fields, an alternative approach to identify fracture height has been developed which provides fit-for-purpose results. It is based on the analysis of naturally occurring radioactive minerals (NORM) precipitation. The anomalies were observed in the many gas reservoirs even in cases when tracers were not used. At certain conditions, these anomalies can be used to characterize fracture propagation and optimize future wells hydraulic Fracture design. A high number of PLTs and well test information were analyzed. Since tight formations normally don't produce without fracturing, radioactive anomalies flag the contributing intervals and hence fracture propagation. The main element of analysis procedure is related to that fact that if no tracers applied, the discrepancy between normalized Open Hole Gamma Ray and Gamma Ray taken during PLT after 6-12 months of production can be used instead to establish fracture height. This method cannot be applied for immediate interpretation of fracture propagation because time is required to precipitate NORM and using the anomalies concept. The advantage of this method is that it can be used in some fields to estimate the frac effectiveness of wells without artificial tracers. It is normally assumed that the Natural radioactivity anomalies appear mainly due to co-production of the formation water. However, in the fields of interest the anomalies appear in wells producing only gas and condensate. This observation provides an opportunity for active fracture height determination at minimum cost.

scholarly journals Energy Return on Energy Invested for Tight Gas Wells in the Appalachian Basin, United States of America

2011 ◽  
Vol 3 (10) ◽  
pp. 1986-2008 ◽  
Author(s):  
Bryan Sell ◽  
David Murphy ◽  
Charles A.S. Hall
Keyword(s):  
United States ◽  
United States Of America ◽  
Appalachian Basin ◽  
Tight Gas ◽  
Gas Wells

Gas Volumes in Place Estimation Method for Tight Gas Wells: Combining Formation Stress-sensitivity and Two-phase Flow

2015 ◽  
Author(s):  
Xiangji Dou ◽  
Xinwei Liao ◽  
Xiaofeng Li ◽  
Hongmei Liao ◽  
Xiangnan He ◽  
...  
Keyword(s):  
Two Phase Flow ◽  
Estimation Method ◽  
Stress Sensitivity ◽  
Phase Flow ◽  
Tight Gas ◽  
Gas Wells ◽  
Two Phase
Sign in / Sign up

Export Citation Format

Share Document