Effects of Gas and Liquid Velocity on Steady-State Foam Flow at High Temperature

1992 ◽  
Author(s):  
W.T. Osterloh ◽  
M.J. Jante
Keyword(s):  
Steady State ◽  
High Temperature ◽  
Liquid Velocity ◽  
Foam Flow

Transient Analysis of a Ceramic High Temperature Heat Exchanger and Chemical Decomposer

2007 ◽  
Author(s):  
Valery Ponyavin ◽  
Taha Mohamed ◽  
Mohamed Trabia ◽  
Yitung Chen ◽  
Anthony E. Hechanova
Keyword(s):  
Steady State ◽  
High Temperature ◽  
Heat Exchanger ◽  
Thermal Stresses ◽  
Three Dimensional ◽  
Failure Criteria ◽  
Operating Conditions ◽  
Finite Element Software ◽  
Micro Channels ◽  
Temperature Heat

Ceramics are suitable for use in high temperature applications as well as corrosive environment. These characteristics were the reason behind selection silicone carbide for a high temperature heat exchanger and chemical decomposer, which is a part of the Sulphur-Iodine (SI) thermo-chemical cycle. The heat exchanger is expected to operate in the range of 950°C. The proposed design is manufactured using fused ceramic layers that allow creation of micro-channels with dimensions below one millimeter. A proper design of the heat exchanges requires considering possibilities of failure due to stresses under both steady state and transient conditions. Temperature gradients within the heat exchanger ceramic components induce thermal stresses that dominate other stresses. A three-dimensional computational model is developed to investigate the fluid flow, heat transfer and stresses in the decomposer. Temperature distribution in the solid is imported to finite element software and used with pressure loads for stress analysis. The stress results are used to calculate probability of failure based on Weibull failure criteria. Earlier analysis showed that stress results at steady state operating conditions are satisfactory. The focus of this paper is to consider stresses that are induced during transient scenarios. In particular, the cases of startup and shutdown of the heat exchanger are considered. The paper presents an evaluation of the stresses in these two cases.

The Modelling and Coupling Methodology of ANSYS CFX Using Porous Media for PB-AHTR

2013 ◽  
Author(s):  
Linsen Li ◽  
Haomin Yuan ◽  
Kan Wang
Keyword(s):  
Porous Media ◽  
Monte Carlo ◽  
Steady State ◽  
High Temperature ◽  
Monte Carlo Code ◽  
First Principle ◽  
Pebble Bed ◽  
Coupled Calculation ◽  
Ansys Cfx ◽  
High Temperature Reactor

This paper introduces a first-principle steady-state coupling methodology using the Monte Carlo Code RMC and the CFD code CFX which can be used for the analysis of small and medium reactors. The RMC code is used for neutronics calculation while CFX is used for Thermal-Hydraulics (T-H) calculation. A Pebble Bed-Advanced High Temperature Reactor (PB-AHTR) core is modeled using this method. The porous media is used in the CFX model to simulate the pebble bed structure in PB-AHTR. This research concludes that the steady-state coupled calculation using RMC and CFX is feasible and can obtain stable results within a few iterations.

Study on Thermal Cycling of Sn0.7Cu Solder

2013 ◽  
Vol 791-793 ◽  
pp. 362-365
Author(s):  
Li Yang ◽  
Ju Li Li ◽  
Jing Guo Ge ◽  
Meng Li ◽  
Nan Ji
Keyword(s):  
Shear Stress ◽  
Steady State ◽  
High Temperature ◽  
Thermal Cycling ◽  
Shear Strain ◽  
Maximum Shear Stress ◽  
Steady State Creep ◽  
Maximum Shear Strain ◽  
Cycle Number ◽  
State Cycle

Thermal cycling of a unit Sn0.7Cu solder was studied based on the steady-state creep constitutive equation and Matlab software. The results show that there is a steady-state cycle for the thermal cycling of unit Sn0.7Cu eutectic solder. In steady-state thermal cycling, the shear stress is increased with the increase of temperature. There is a stage of stress relaxation during high temperature. A liner relationship between maximum shear stress and maximum shear strain is observed during thermal cycling. The metastable cycle number is declined greatly with the increase of maximum shear strain.

scholarly journals Steady-state radiative cooling rates for low-density, high-temperature plasmas

1977 ◽  
Vol 20 (5) ◽  
pp. 397-439 ◽  
Author(s):  
D.E. Post ◽  
R.V. Jensen ◽  
C.B. Tarter ◽  
W.H. Grasberger ◽  
W.A. Lokke
Keyword(s):  
Steady State ◽  
High Temperature ◽  
Radiative Cooling ◽  
Low Density ◽  
Cooling Rates
Sign in / Sign up

Export Citation Format

Share Document