An Efficient Hybrid Model for 3D Complex Fractured Vuggy Reservoir Simulation

SPE Journal ◽  
2020 ◽  
Vol 25 (02) ◽  
pp. 907-924 ◽  
Author(s):  
Lijun Liu ◽  
Zhaoqin Huang ◽  
Jun Yao ◽  
Yuan Di ◽  
Yu-Shu Wu

Summary Fractured vuggy reservoir is a typical type of carbonate reservoir. The 3D complex fracture networks and Stokes flow inside vugs make fractured vuggy reservoir simulation remain a challenging problem. Most of the proposed models in previous studies are computation consuming, which cannot meet with the demand of field application. In this paper, a novel and efficient hybrid model, consisting of a modified embedded discrete fracture model (EDFM) and a vug model, is proposed to simulate multiphase flow in 3D complex fractured vuggy reservoirs. The modified EDFM improves the fracture-discretization process by using two sets of independent grids for matrix and fracture systems, which promotes the modeling of 3D complex fractures in real geological structures. Meanwhile, the vug model simplifies the coupled porous-free flow with the assumption of multiphase instantaneous gravity differentiation. The accuracy of the modified EDFM and the vug model is demonstrated by comparing the results with those of the conventional EDFM and volume of fluid (VOF) method. After that, a series of case studies, including three conceptual fracture-vug unit models and a real field model, have been conducted to test the proposed hybrid model. The results of the three fracture-vug unit models indicate the significant effect of a local fracture-vug structure on the flow characteristics and production performance. Finally, the application with a real field model with 3D complex fracture and vug geometries further verifies the practicability of our proposed model in real fractured vuggy reservoirs.

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1635
Author(s):  
Linkai Li ◽  
Xiao Guo ◽  
Ming Zhou ◽  
Gang Xiang ◽  
Ning Zhang ◽  
...  

Hydraulic fracturing is usually employed to create a complex fracture network to enhance heat extraction in the development of an enhanced geothermal system. The heat extraction depends on the heat conduction from the rock matrix to the flowing fractures and the heat convection through a complex fracture network. Therefore, the geometries of the fracture network have important influences on the thermal breakthrough. In this paper, a hydro-thermal coupling mathematical model considering a complex fracture network is established. The embedded discrete fracture model is adopted to explicitly model the individual fracture on the mass flow and heat transfer. The model is validated by analytical solutions. Fracture network parameters are changed systematically to investigate the effects of fracture network distribution including regular and complex shape on the thermal production performance. The results show that the increase of producing pressure differential, fracture number, and conductivity will cause an early thermal breakthrough. The strong variation in fracture conductivity, as well as spacing and orientation, will cause thermal flow channeling and decrease the efficiency of heat extraction. A modified connectivity field is proposed to characterize the spatial variation of fracture network connectivity, which can be used to infer the thermal flow path.


SPE Journal ◽  
2013 ◽  
Vol 19 (01) ◽  
pp. 06-18 ◽  
Author(s):  
Wentao Zhou ◽  
Raj Banerjee ◽  
Bobby Poe ◽  
Jeff Spath ◽  
Michael Thambynayagam

Summary The application of horizontal-well drilling and multistage fracturing has become a norm in the industry to develop unconventional resources from ultratight formations. A complex fracture network generated in the presence of stress isotropy and pre-existing natural fractures immensely extends reservoir contact and improves hydrocarbon production. A semianalytical method is presented in this paper to simulate the production from such a complex fracture network. This method combines an analytical reservoir solution with a numerical solution on discretized fracture panels. The mathematics is briefly introduced. Numerous case studies are presented, from a simple planar fracture to a real-field example from the Barnett shale. Production behavior and the key flow regimes are discussed. With its simplicity, yet capturing the physics of the transient-production performance, this approach provides an accessible tool for people from multiple disciplines in unconventional-resource development to rapidly evaluate treated-well productivity and stimulation effectiveness.


2021 ◽  
Author(s):  
Tenamutha Ravichandran ◽  
Sulaiman Sidek ◽  
Ahmed Nabil Zakaria ◽  
Karim Ahmed Shata ◽  
Zool Nasri Sapiee ◽  
...  

Abstract Objectives, Scope This paper provides valuable insights on aqueous retarded acid system evaluation based on laboratory testing, literature review and engineering analysis prior to the field application for a candidate well in a gas field, offshore East Malaysia (Figure 1). The field is a reefal carbonates build-up overlayed by a thick shale sequence and is one of the deepest fields in Sarawak Asset, in which the produced fluid contains up to 3,500ppm H2S, 20% CO2 and bottomhole temperature up to 288°F. Production enhancement for this carbonate reservoir requires application of a more effective approach to address challenges associated with acid placement and reservoir contact in long pay zones of complex diagenetic facies high temperature carbonate reservoirs, thereby improving return on investment. Figure 1Structural map of Central Luconia carbonate platform offshore Sarawak, Malaysia (Janjuhah et al. 2016) Methods, Procedures, Process The workflow adopted for the stimulation job involves thorough historical production data analysis, detail petrophysical review to evaluate reservoir properties, in-depth production performance analysis (i.e. nodal and network modeling), completion review to ascertain damage mechanism and economic evaluation that include decision risk analysis to evaluate all range of probabilistic outcome. Initial selection of stimulation fluids was based on the mineralogical composition of the main producing formation. A detailed study of reservoir rock and its reaction to various acid systems has been based upon software modeling where sensitivity analyses involving multiple treatment schedule scenarios incorporating various acid and diverter fluid systems are considered. Coreflood experiment was then performed to determine the Pore Volume to Breakthrough (PVBT) comparing emulsified acid with aqueous retarded acid at temperature of 250°F, injection rate of 3ml/min and at confining pressure of 1,500psi. The low PVBT values (i.e. 1.125 and 0.521) and unique breakthrough features obtained from the coreflood confirmed that aqueous retarded acid is effective to stimulate the carbonate reservoir. Compatibility testing was also conducted to assess the stability of the retarded acid recipes and potential reaction with reservoir fluids (i.e. water and condensate), downhole completion and surface equipment. Results, Observation, Conclusion An established stimulation software was used to refine the acid volume calculation and placement analysis. Field trial was made using combined application of the aqueous retarded acid and viscoelastic diverting acid. Considering several case scenarios, the remedial treatment was performed via bullheading to achieve optimum injection rate within 5bpm to 7bpm. Total of 197bbls acid and 197bbls diverter was be pumped during the treatment that will be split in several stages to achieve average invasion profile of 2.8ft and -1.3 skin value. This paper presents aqueous retarded acid system as alternative to widely used emulsified acid systems. Field application of the approach supports the theoretical findings based on substantial improvement in well production, pressure matching of the remedial treatment and calibrated nodal analysis assessment. This demonstrates the value of holistic approach of laboratory testing, comprehensive software modeling and application of enhanced stimulation fluids to overcome complex technical challenges Novel, Additive Information The field production was previously constrained by its high CO2 levels and the supply gas ratio agreement. The information and lessons learnt from this paper will be applicable as evident of practical improvements to achieve sustainable production from the field since it has a strategic importance as production, processing and export hub to other four gas fields. Recent CO2 blending project has allow a better distribution of gas across the network and therefore demand higher production from the field, thus further unlock it potential to achieve economic optimization.


2021 ◽  
pp. 014459872199465
Author(s):  
Yuhui Zhou ◽  
Sheng Lei ◽  
Xuebiao Du ◽  
Shichang Ju ◽  
Wei Li

Carbonate reservoirs are highly heterogeneous. During waterflooding stage, the channeling phenomenon of displacing fluid in high-permeability layers easily leads to early water breakthrough and high water-cut with low recovery rate. To quantitatively characterize the inter-well connectivity parameters (including conductivity and connected volume), we developed an inter-well connectivity model based on the principle of inter-well connectivity and the geological data and development performance of carbonate reservoirs. Thus, the planar water injection allocation factors and water injection utilization rate of different layers can be obtained. In addition, when the proposed model is integrated with automatic history matching method and production optimization algorithm, the real-time oil and water production can be optimized and predicted. Field application demonstrates that adjusting injection parameters based on the model outputs results in a 1.5% increase in annual oil production, which offers significant guidance for the efficient development of similar oil reservoirs. In this study, the connectivity method was applied to multi-layer real reservoirs for the first time, and the injection and production volume of injection-production wells were repeatedly updated based on multiple iterations of water injection efficiency. The correctness of the method was verified by conceptual calculations and then applied to real reservoirs. So that the oil field can increase production in a short time, and has good application value.


2021 ◽  
Vol 13 (1) ◽  
pp. 122-129
Author(s):  
Kaiyuan Liu ◽  
Li Qin ◽  
Xi Zhang ◽  
Liting Liu ◽  
Furong Wu ◽  
...  

Abstract Carbonate rocks frequently exhibit less predictable seismic attribute–porosity relationships because of complex and heterogeneous pore geometry. Pore geometry plays an important role in carbonate reservoir interpretation, as it influences acoustic and elastic characters. So in porosity prediction of carbonate reservoirs, pore geometry should be considered as a factor. Thus, based on Gassmann’s equation and Eshelby–Walsh ellipsoidal inclusion theory, we introduced a parameter C to stand by pore geometry and then deduced a porosity calculating expression from compressional expression of Gassmann’s equation. In this article, we present a porosity working flow as well as calculate methods of every parameter needed in the porosity inverting equation. From well testing and field application, it proves that the high-accuracy method is suitable for carbonate reservoirs.


2021 ◽  
Author(s):  
Obinna Somadina Ezeaneche ◽  
Robinson Osita Madu ◽  
Ishioma Bridget Oshilike ◽  
Orrelo Jerry Athoja ◽  
Mike Obi Onyekonwu

Abstract Proper understanding of reservoir producing mechanism forms a backbone for optimal fluid recovery in any reservoir. Such an understanding is usually fostered by a detailed petrophysical evaluation, structural interpretation, geological description and modelling as well as production performance assessment prior to history matching and reservoir simulation. In this study, gravity drainage mechanism was identified as the primary force for production in reservoir X located in Niger Delta province and this required proper model calibration using variation of vertical anisotropic ratio based on identified facies as against a single value method which does not capture heterogeneity properly. Using structural maps generated from interpretation of seismic data, and other petrophysical parameters from available well logs and core data such as porosity, permeability and facies description based on environment of deposition, a geological model capturing the structural dips, facies distribution and well locations was built. Dynamic modeling was conducted on the base case model and also on the low and high case conceptual models to capture different structural dips of the reservoir. The result from history matching of the base case model reveals that variation of vertical anisotropic ratio (i.e. kv/kh) based on identified facies across the system is more effective in capturing heterogeneity than using a deterministic value that is more popular. In addition, gas segregated fastest in the high case model with the steepest dip compared to the base and low case models. An improved dynamic model saturation match was achieved in line with the geological description and the observed reservoir performance. Quick wins scenarios were identified and this led to an additional reserve yield of over 1MMSTB. Therefore, structural control, facies type, reservoir thickness and nature of oil volatility are key forces driving the gravity drainage mechanism.


2008 ◽  
Author(s):  
Danila Gulyaev ◽  
Andrey Ivanovich Ipatov ◽  
Nataliya Chernoglazova ◽  
Maxim Fedoseev

2018 ◽  
Vol 6 (1) ◽  
pp. 47-56
Author(s):  
Rahul Soni ◽  
Mihir Bhatt

This paper presents the experimental outcomes regard to the flashover performance of pin, shackle and disc insulators under contaminated conditions. For making contaminated surface various samples are made like salt, dust, industry pollution and miscellaneous foreign particles of wet and dry conditions as per IEC testing techniques. Moreover, each insulator has been tested under above mentioned conditions. For each insulator its breakdown voltages were measured. After doing performance analysis of different insulators under contaminated condition measurement of breakdown voltages are done with incorporation of real field application of insulators and making analogy with various regions of India.


Sign in / Sign up

Export Citation Format

Share Document