Field Application of the All-Oil Drilling-Fluid Concept

1992 ◽  
Vol 7 (01) ◽  
pp. 20-24 ◽  
Author(s):  
L.J. Fraser
Keyword(s):  
Drilling Fluid ◽  
Field Application ◽  
Oil Drilling

scholarly journals Application of Thermal Resistant Gemini Surfactants in Highly Thixotropic Water-in-oil Drilling Fluid System

2019 ◽  
Vol 17 (1) ◽  
pp. 1435-1441
Author(s):  
Yonggui Liu ◽  
Yang Zhang ◽  
Jing Yan ◽  
Tao Song ◽  
Yongjun Xu
Keyword(s):  
Gemini Surfactants ◽  
Drilling Fluid ◽  
Drilling Fluids ◽  
Excellent Thermal Stability ◽  
Oil Drilling ◽  
Low Viscosity ◽  
Emulsion Drops ◽  
Oil Emulsions ◽  
Building Capability ◽  
Liquid Precipitation

AbstractTraditional water-in-oil drilling fluids are limited by their shear thinning behavior. In this article, we propose the synthesis of a thermal resistant quaternary ammonium salt gemini surfactant DQGE-I. This surfactant was synthesized using monomers such as N,N-dimethyl-1,3-propanediamine, organic acids and epichlorohydrin, as well as blocking groups such as N-vinylpyrrolidone (NVP). The prepared surfactant exhibited various advantages over traditional surfactants, including excellent thermal stability, good emulsifying and wetting capability. The use of these surfactants was shown to improve the compactness of emulsifier molecules at the oil/water interface, as well as the overall emulsificaiton effect. Laboratory studies revealed that water-in-oil emulsions prepared using DQGE-I showed high emulsion breaking voltage, low liquid precipitation and small and uniformly distributed emulsion drops. Highly thixotropic water-in-oil drilling fluids based on DQGE-I showed low viscosity, high shear rate and thermal tolerance up to 260oC. Additionally, the proposed fluid was applied in 16 wells (including WS1-H2, GS3 and XS1-H8) in the Daqing Oilfield. Testing showed that DQGE-1 exhibited excellent rheological behavior and wall-building capability. The emulsion breaking voltage exceeded 1500 V, and the yield point/ plastic viscosity ratio exceeded 0.4. The use of this surfactant can help to solve problems such as high formation temperature and poor well wall stability.

A Generalized Model for the Field Assessment of Drilling Fluid Viscoelasticity

2021 ◽  
Author(s):  
Chen Hongbo ◽  
Okesanya Temi ◽  
Kuru Ergun ◽  
Heath Garett ◽  
Hadley Dylan
Keyword(s):  
Drilling Fluid ◽  
Field Testing ◽  
Field Application ◽  
Testing Equipment ◽  
Drilling Fluids ◽  
Rotational Viscometer ◽  
Generalized Model ◽  
Fluid Elasticity ◽  
Field Samples ◽  
Drilling Operations

Abstract Recent studies highlight the significant role of drilling fluid elasticity in particle suspension and hole cleaning during drilling operations. Traditional methods to quantify fluid elasticity require the use of advanced rheometers not suitable for field application. The main objectives of the study were to develop a generalized model for determining viscoelasticity of a drilling fluid using standard field-testing equipment, investigate the factors influencing drilling fluid viscoelasticity in the field, and provide an understanding of the viscoelasticity concept. Over 80 fluid formulations used in this study included field samples of oil-based drilling fluids as well as laboratory samples formulated with bentonite and other polymers such as partially-hydrolyzed polyacrylamide, synthesized xanthan gum, and polyacrylic acid. Detailed rheological characterizations of these fluids used a funnel viscometer and a rotational viscometer. Elastic properties of the drilling fluids (quantified in terms of the energy required to cause an irreversible deformation in the fluid's structure) were obtained from oscillatory tests conducted using a cone-and-plate type rheometer. Using an empirical approach, a non-iterative model for quantifying elasticity correlated test results from a funnel viscometer and a rotational viscometer. The generalized model was able to predict the elasticity of drilling fluids with a mean absolute error of 5.75%. In addition, the model offers practical versatility by requiring only standard drilling fluid testing equipment to predict viscoelasticity. Experimental results showed that non-aqueous fluid (NAF) viscoelasticity is inversely proportional to the oil-water ratio and the presence of clay greatly debilitates the elasticity of the samples while enhancing their viscosity. The work efforts present a model for estimating drilling fluid elasticity using standard drilling fluid field-testing equipment. Furthermore, a revised approach helps to describe the viscoelastic property of a fluid that involves quantifying the amount of energy required to irreversibly deform a unit volume of viscoelastic fluid. The methodology, combined with the explanation of the viscoelasticity concept, provides a practical tool for optimizing drilling operations based on the viscoelasticity of drilling fluids.

Stimulation of Wells Damaged by Barite Present in Filter Cake or Scale

SPE Journal ◽  
2021 ◽  
pp. 1-11
Author(s):  
Igor Ivanishin ◽  
Hisham A. Nasr-El-Din ◽  
Dmitriy Solnyshkin ◽  
Artem Klyubin
Keyword(s):  
High Temperature ◽  
Filter Cake ◽  
Ethylenediaminetetraacetic Acid ◽  
Solid Phase ◽  
Barium Carbonate ◽  
Process Analysis ◽  
Drilling Fluid ◽  
Field Application ◽  
X Ray ◽  
Dissolution Efficiency

Summary High-temperature (HT) deep carbonate reservoirs are typically drilled using barite (BaSO4) as a weighting material. Primary production in these tight reservoirs comes from the network of natural fractures, which are damaged by the invasion of mud filtrate during drilling operations. For this study, weighting material and drilling fluid were sampled at the same drillsite. X-ray diffraction (XRD) and X-ray fluorescence analyses confirmed the complex composition of the weighting material: 43.2 ± 3.8 wt% of BaSO4 and 47.8 ± 3.3 wt% of calcite (CaCO3); quartz and illite comprised the rest. The drilling fluid was used to form the filter cake in a high-pressure/high-temperature (HP/HT) filter-press apparatus at a temperature of 300°F and differential pressure of 500 psig. Compared with the weighting material, the filter cake contained less CaCO3, but more nondissolvable minerals, including quartz, illite, and kaolinite. This difference in mineral composition makes the filter cake more difficult to remove. Dissolution of laboratory-grade BaSO4, the field sample of the weighting material, and drilling-fluid filter cake were studied at 300°F and 1,000 to 1,050 psig using an autoclave equipped with a magnetic stirrer drive. Two independent techniques were used to investigate the dissolution process: analysis of the withdrawn-fluid samples using inductively coupled plasma-optical emission spectroscopy, and XRD analysis of the solid material left after the tests. The dissolution efficiency of commercial K5-diethylenetriaminepentaacetic acid (DTPA), two K4-ethylenediaminetetraacetic acid (EDTA), Na4-EDTA solutions, and two “barite dissolvers” of unknown composition was compared. K5-DTPA and K4-EDTA have similar efficiency in dissolving BaSO4 as a laboratory-grade chemical and a component of the calcite-containing weighting material. No pronounced dissolution-selectivity effect (i.e., preferential dissolution of CaCO3) was noted during the 6-hour dissolution tests with both solutions. Reported for the first time is the precipitation of barium carbonate (BaCO3) when a mixture of BaSO4 and CaCO3 is dissolved in DTPA or EDTA solutions. BaCO3 composes up to 30 wt% of the solid phase at the end of the 6-hour reaction, and can be dissolved during the field operations by 5 wt% hydrochloric acid. Being cheaper, K4-EDTA is the preferable stimulation fluid. Dilution of this chelate increases its dissolution efficiency. Compared with commonly recommended solutions of 0.5 to 0.6 M, a more dilute solution is suggested here for field application. The polymer breaker and K4-EDTA solution are incompatible; therefore, the damage should be removed in two stages if the polymer breaker is used.

Micro Foam Drilling Fluid System Performance Research and Application

2013 ◽  
Vol 868 ◽  
pp. 601-605 ◽  
Author(s):  
Nan Nan Wang ◽  
Yong Ping Wang ◽  
Dong Zhang ◽  
Hui Min Tang
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Field Application ◽  
Fluid System ◽  
Foaming Agent ◽  
Fluid Properties ◽  
Single Well ◽  
Set Up ◽  
Reservoir Protection ◽  
Foam Drilling

Micro foam drilling fluid has irreplaceable advantages in reservoir protection, drilling speed, improve the cementing quality and leak plugging, especially suitable for the "three low" Daqing peripheral oilfield Haita area. Indoor the foaming agent, foam stabilizing agent were screened, Preferably choose the efficient composite foaming agent, stabilizer and thickener, the drilling fluid system is transformed into micro foam drilling fluid system. And evaluate the inhibition, anti temperature, anti pollution (anti clay, calcium, anti kerosene) reservoir protection capability, The micro foam drilling fluid leakage, oil reservoir protection, speed up mechanism and micro foam drilling fluid rheological characteristics were studied, Set up a specific rheological model of Micro Foam Drilling fluid, According to the characteristics of Gulong oilfield,R&D the calculation software of Micro Foam drilling fluid density changes with the temperature, pressure and provide guidance for safe drilling. Field application shows that the system has the advantages of simple preparation,convenient maintenance, easy transformation, drilling fluid properties can meet the requirements of drilling technology, To ensure the safe, fast, and high quality drilling of oil and gas,reduce pollution,improve the productivity of a single well.

Multiscale Formation Damage Mechanisms and Control Technology for Deep Tight Clastic Gas Reservoirs

SPE Journal ◽  
2021 ◽  
pp. 1-16
Author(s):  
Yijun Wang ◽  
Yili Kang ◽  
Lijun You ◽  
Chengyuan Xu ◽  
Xiaopeng Yan ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Damage Control ◽  
Production Capacity ◽  
Damage Mechanism ◽  
Field Application ◽  
Formation Damage ◽  
Fluid Loss ◽  
Drilling Process ◽  
Gas Reservoirs ◽  
Filtration Loss

Summary Severe formation damage often occurs during the drilling process, which significantly impedes the timely discovery, accurate evaluation, and efficient development of deep tight clastic gas reservoirs. The addition of formation protection additives into drilling fluid after diagnosing the damage mechanism is the most popular technique for formation damage control (FDC). However, the implementation of traditional FDC measures does not consider the multiscale damage characteristics of the reservoir. The present study aims at filling this gap by providing a complete and systematic damage control methodology based on multiscale FDC theory. First, the characteristics of multiscale seepage channels were described through petrology, petrophysics, and well-history data. Subsequently, based on laboratory formation damage evaluation experiments, the formation damage mechanism of each seepage scale was determined. Finally, based on the multiscale formation damage mechanism, a systematic multiscale FDC technology was proposed. Through the use of optimized drilling fluid based on multiscale FDC theory, high-permeability recovery ratio (PRR), high-pressure bearing capacity of plugging zone, and low cumulative filtration loss were observed by laboratory validation experiments. Shorter drilling cycle, less drill-in-fluid loss, lower skin factor, and higher production rates were obtained by using the optimized FDC drilling fluid in field application. This multiscale FDC theory shows excellent results in minimizing formation damage, maintaining original production capacity, and effectively developing gas reservoirs with multiscale pore structure characteristics.

Hollow Glass Spheres HGS in Drilling Fluid: Case Study of Preventing and Mitigating Total Losses

2021 ◽  
Author(s):  
Vitaly Sherishorin ◽  
Martin Rylance ◽  
Yevgeniy Tuzov ◽  
Olga Krokhaleva ◽  
Evgeny Tikhonov ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Scale Up ◽  
Cost Savings ◽  
Field Application ◽  
Lessons Learned ◽  
Drilling Fluids ◽  
Lost Circulation ◽  
Initial Application ◽  
General Plan ◽  
Effective Manner

Abstract The paper describes the first deployment of HGS in Eastern Siberia as a mud additive. The technology was utilized for reducing drilling fluid density for prevention and mitigation of losses; while drilling through a producing reservoir section with low pore pressure, unconsolidated and fractured sands. The engineering considerations, fundamentals of the approach and major risks involved were reviewed with application to the Sredneboutobinskoye Oilfield as a pilot field application for broader future plans. Key planning, delivery and execution principles of the initial application will be reported in the paper. Initially deployed on three wells, including multi-laterals (Rylance et al., 2021), the paper will walk through the engineering considerations during the planning and execution phases. Key sections include the data gathered and the many lessons learned during the incremental and stepwise deployment. The paper will also report on post drilling productivity and comparisons with the offset wells drilled with conventional mud systems, which suffered severe losses. The results of this pilot have exceeded expectations. There have been many insights and the Team are now looking to set a timetable to scale-up across the Taas-Yuryakh Neftegazodobycha (TYNGD). After many hours of laboratories study and preparation works, the general plan was to reduce the static density and ECD to mitigate fluid losses. However, the applied results showed additional effects from HGS. Data will be provided that demonstrated loss-free drilling was achieved where this had not been the case before, with a material reduction in NPT, lost circulation material (LCM) needs and costs. Much has been learned, recovered HGS material has been demonstrated to be an effective LCM pill and centralization of mud processing may offer additional cost savings and improvements. Further efficiencies are also expected to be achieved and future potential is considerable. HGS for cementing is well documented, yet application for drilling fluids has been less well reported and almost exclusively related to single wells. The TYNGD application is innovative as this is a major development with 10 active drilling rigs. The application is on multi-laterals and offset wells are available for direct comparison. The results of the approach demonstrate a new way of performing well construction in an effective manner for major field developments where losses are prevalent.

Sign in / Sign up

Export Citation Format

Share Document